New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione multi-rotore della scheda di controllo V3.0 (Atmega328 PA)

Dipartimento Funzione multi-rotore della scheda di controllo V3.0 (Atmega328 PA)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000011
WANT FREE SHIPPING? Click here to find out more!

Basato sul popolare e già ben supportato bordo KK di controllo, la scheda di controllo Dipartimento Funzione multi-rotore sta portando multi-rotore follia per le masse con le sue innovazioni in termini di qualità e prezzo!

La scheda di controllo Dipartimento Funzione multi-rotore utilizza giapponesi giroscopi piezoelettrici Murata che sono meno sensibili alle vibrazioni di tipo giroscopi SMD e dispone anche dello stato della produzione d'arte SMT per garantire la qualità. Questa scheda utilizza anche un utente programmabile Atmega328PA IC.

Specifiche.
Dimensioni: 50,5 millimetri x 50,5 millimetri x 23,5 millimetri
Peso: 14,5 grammi
IC: Atmega328 PA
Gyro: Murata Piezo
Tensione in ingresso: 3.3-5.5V
Segnale dal ricevitore: 1520us (4 canali)
Segnale di ESC: 1520us


Che cosa è una scheda multi-controllo del rotore si chiede?

Il controller Dipartimento Funzione multi-rotore è una scheda di controllo di volo per il multi-rotore Aerei (Tricopters, quadcopter, Hexcopters). Il suo scopo è quello di stabilizzare l'aereo in volo. Per fare questo prende il segnale dal tre su giroscopi bordo (rollio, beccheggio e imbardata) quindi passa il segnale al Atmega328PA IC. L'unità Atmega328PA IC elabora poi questi segnali, secondo il software installato degli utenti e passa i segnali di controllo ai regolatori di velocità elettronici installati (CES). Questi segnali istruiscono i CES per effettuare regolazioni di precisione ai motori velocità di rotazione che a sua volta si stabilizza vostro mestiere multi-rotore.

La scheda di controllo Dipartimento Funzione multi-rotore utilizza anche i segnali dal ricevitore sistemi radio (Rx) e passa questi segnali al Atmega328PA IC tramite gli ingressi Ail, ele, thr e Rud. Una volta che questa informazione è stato elaborato l'IC invierà variando segnali al CES che a loro volta regolano la velocità di rotazione di ciascun motore per indurre volo controllato (su, giù, indietro, avanti, sinistra, destra, imbardata).

Nota: Un manuale utente è disponibile nella scheda file.
* Le royalties pagate su ogni unità venduta Rolf, il progettista originale KK.

  • SKU 9171000011
  • Brand HobbyKing
  • Capacità ( mAh ) -
  • Peso 99.0000
  • Lunghezza 140.00
  • Packaging Width 34.00
  • Altezza 72.00
  • Xcopter Scratch Built Stable Quadcopter
  • Xcopter Scratch Built Stable Quadcopter
  • Xcopter Scratch Built Stable Quadcopter
  • Xcopter Scratch Built Stable Quadcopter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Got this board and it will not work on my quad. Tried everything and it will not even flash successfully. Board is dead. No lights flash. Nothing. Tried my buddy's board and all works good he tried this board and its dead. I always get the broken one. Just my luck.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this board and it will not work on my quad. Tried everything and it will not even flash successfully. Board is dead. No lights flash. Nothing. Tried my buddy's board and all works good he tried this board and its dead. I always get the broken one. Just my luck.

I recommend the Flash tool for this. I know that they say it comes set up for a Quad but mine did not. I had to buy the kk2 board because when I went to buy the flash tool it was not in stock. I'm not going to complain because once i receive my flash tool Ill have to build another multirotor... :) o well...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recommend the Flash tool for this. I know that they say it comes set up for a Quad but mine did not. I had to buy the kk2 board because when I went to buy the flash tool it was not in stock. I'm not going to complain because once i receive my flash tool Ill have to build another multirotor... :) o well...

Gut fr den Einstieg, jedoch ohne Erfahrung wo man wie drehen muss eher schwierig. Durch das Brett mit dem Display leicht zu toppen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gut fr den Einstieg, jedoch ohne Erfahrung wo man wie drehen muss eher schwierig. Durch das Brett mit dem Display leicht zu toppen.

Easy to use basic control board works well as it comes.
Can be set up easily using the gyro adjuster pots without needing any fancy gear.
Only suitable for x copter unless you have a lead and PC software to change over to other configuration but for my first multirota its perfect.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to use basic control board works well as it comes.
Can be set up easily using the gyro adjuster pots without needing any fancy gear.
Only suitable for x copter unless you have a lead and PC software to change over to other configuration but for my first multirota its perfect.

Great starter FC for your first quad. Definitely is limited in functions but you won't find anything this cheap. Annoying to configure and load firmware but otherwise it everything works out fine. Trimming the PID's can be frustrating but that is the case with any FC. Just watch some videos and try understanding it. The manual potentiometers are GREAT for first timers because you will be constantly changing them before getting it just right. Overall, I am glad this was my first FC. Taught me a lot and in the end I was pretty 'locked in' and happy with it. I have since moved up to Multiwii's and Naze32's but I would definitely recommend this as a first.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great starter FC for your first quad. Definitely is limited in functions but you won't find anything this cheap. Annoying to configure and load firmware but otherwise it everything works out fine. Trimming the PID's can be frustrating but that is the case with any FC. Just watch some videos and try understanding it. The manual potentiometers are GREAT for first timers because you will be constantly changing them before getting it just right. Overall, I am glad this was my first FC. Taught me a lot and in the end I was pretty 'locked in' and happy with it. I have since moved up to Multiwii's and Naze32's but I would definitely recommend this as a first.

Good board easy to programm with USBasp

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good board easy to programm with USBasp

placa justeta. tal i com ve de fabrica es per quad .
funciona mes o menys be. pero li falta fiabilitat.
economica pero justeta.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

placa justeta. tal i com ve de fabrica es per quad .
funciona mes o menys be. pero li falta fiabilitat.
economica pero justeta.

1 crown, because the one i got doesn't work at all...
Moreover, there's a large amount of soldering flux left on the board and all soldering points are oxydized.
I didn't (and won't) contact the support center for a so cheap item so i ordered a new one to try again. Hope the next one will work !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

1 crown, because the one i got doesn't work at all...
Moreover, there's a large amount of soldering flux left on the board and all soldering points are oxydized.
I didn't (and won't) contact the support center for a so cheap item so i ordered a new one to try again. Hope the next one will work !

The board will appear to not work when you get it. You have to hold your throttle all the way down and to the right for 5 seconds to get the board to "arm". A little led light will come on and everything works after that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The board will appear to not work when you get it. You have to hold your throttle all the way down and to the right for 5 seconds to get the board to "arm". A little led light will come on and everything works after that

Looks like a good board but i brought it for a tricopter and couldnt find any way to make it work looks like it would be perfect for a quad but now that i have the kk 2 board i wouldnt look at any thing else

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks like a good board but i brought it for a tricopter and couldnt find any way to make it work looks like it would be perfect for a quad but now that i have the kk 2 board i wouldnt look at any thing else

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Customer files
HK User Manual Download [506]
Muj Xcopter Download [2695]
KK Multicopter Manual Download [883]
No File Name Download [429]
Nützliche Links Download [58]
HK FC V3.0 User Manual Download [506]
KK Multicopter ISP pinout Download [768]
No File Name Download [506]
No File Name Download [2]
Flashing your Multicopter Controller Boa Download [1973]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!