Dipartimento Funzione Pubblica Red Brick 20A ESC

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 28, 2014

Very cheap and reliable, local hobby shop are quite expensive and packing also nice TQ HB

• Overall
• Quality
• Value

Certified Buyer Rated

May 28, 2014

Juz mialem kiedys regulator tej firmy i byl okej, dlatego znowu zdecydowalem sie na ta firme. Lubie tanie i dobre regulatory i nie tylko.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 21, 2014

This HobbyKing Red Brick 20A ESC matches the description and good tunes. Settings must be used for instruction and follow the recommendations. Recommend a good regulator.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 09, 2014

Preis / Leistung unschlagbar

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 27, 2014

this is a very simple and easy to use ESC.

i have one another Red Brick 30A ESC, and working properly.

• Overall
• Quality
• Value

Customer Rated

Jan 29, 2014

These ESCs are what you would expect. They are very basic and easy to use. They only downside is that I couldn't get them to work with a programming board. Also like everything from hobbyking it is hit or miss as far as working. 3 out of 4 that I ordered worked fine. Either order nicer turnigy ESCs or order an extra one of these just to ensure that you will have enough in case you get a dud.

• Overall
• Quality
• Value

Customer Rated

Jan 23, 2014

You can't even begin to guess the potential of this ESC with its weak stock firmware : do yourself a favor and re flash it with SimonK firmware. Here is a quick 'how-to' guide * How to flash (certain) Atmega based ESCs with SimonK firmware : You will need : 1- USBasp AVR Programming Device for ATMEL processors (PRODUCT *ID: 381000147) 2- Atmega Socket Firmware Flashing Tool (PRODUCT *ID: 332000007) 3- Download the kkmulticopterflashtool (it has the most recent versions of SimonK firmware) 4- Do a google search for SimonK firmware (you will find a spreadsheet in docs.google with all the compatible ESCs with photos !) 5- Remove the heatshrink wrap from your ESC. Make sure your ESC is the same as in the photo. 6- Align pin 1 dot of the socket flashing tool with the pin 1 dot of the Atmega chip. Press firmly and upload the firmware. Kkflashtool will tell you if the firmware has been successfully upgraded. Make sure you choose the firmware with the bootloader : you can then re flash your ESCs by using the 3 pin servo plug with a ESC USB programming tool (PRODUCT *ID: 9171000243) without having to remove the heatshrink. 7- Get some transparent heatshrink tubing (20 mm) from here.

• Overall
• Quality
• Value

Customer Rated

Jan 03, 2014

Works great so far, I've run it 36hrs straight at 12 volts and 12 amps, barely warm even with almost no airflow.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 31, 2013

Simple to use ESC, does exactly what I need it to do. Quality is good and works well in my swamp dawg

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 01, 2013

A very nice, small, light, and economical ESC for people that do not require special frills. This is an ideal choice for any application for up to 225W. I consider this ESC to be the perfect park flyer (and larger) choice.