Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dipartimento Funzione Super-H 600 QuadCopter (KIT)

Generating Links

Dipartimento Funzione Super-H 600 QuadCopter (KIT)

Prezzo:

Now save risparmia 0,00 € 0,00 €

38,93 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
366000012-0
Spedizione gratuita? Clicca qui per saperne di più!

Sei stanco di fotografia aerea telecamera viene fornita in cerca come un UFO e di volo lento e liscia come si sta prendendo la nonna a fare una passeggiata intorno al blocco? Dipartimento Funzione Pubblica viene in soccorso con il nuovo Super-H 600.

Il nuovo Super-H 600 è un 600 millimetri di classe sportiva volante H quadcopter configurazione. La disposizione ottimale consente per tutta l'attrezzatura sia montato in modo sicuro tra le piastre telaio e sulla linea centrale per la massima manovrabilità. Il telaio superiore ha fondi per 12 vibrazioni palle di isolamento che consentono di gelatina FPV libera e registrazione video HD. Il vantaggio isolamento di un piatto pulito e sporco permette anche di avere valori PID più stretto del controllore di volo per una bella stretta Multirotor libera oscillazione. I bracci collaudate e facilmente disponibili rendono la sostituzione in caso di una "mossa Daredevil andato storto" facile ed economico. Il layout cornice in grado di gestire una vasta gamma di batterie e attrezzature e contiene disposizioni per la macchina fotografica e in avanti giunti cardanici di montaggio.

Se sei pronto per un divertimento ma utilitaristico quadcopter il Super-H 600 supera tutte le aspettative.

Caratteristiche:
• Prop vista libera con il layout H
• Costruito fibre di vetro di qualità e nylon poliammide.
• Pre-threaded manicotti di ottone per tutte le viti telaio.
• armi colorate per l'orientamento per tenervi volare nella direzione giusta.
• Hardware in alluminio anodizzato
• Opzioni di montaggio gancio e asta
• linguette di montaggio di grandi dimensioni sul piano di appoggio di fondo principale per un facile montaggio fotocamera.
• Facile assemblaggio
• L'istituzione di una cornice isolamento dalle vibrazioni pulita e sporca

Specifiche:
Motore al motore diagonale: 600 millimetri
Peso: 599g
Montaggio del motore: 16 ~ 19 millimetri
Telaio lunghezza piatto: 500mm

* Nota: Questo telaio ha disposizioni per un massimo di 12 smorzamento delle vibrazioni palla per un sistema pulito e sporco, il telaio viene fornito con distanziali in alluminio standard. Le sfere di vibrazione sono venduti separatamente e devono essere scelti in funzione del peso dato del telaio superiore caricata.

  • HobbyKing Super-H Quadcopter Frame
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Fran vamo | Acquirente verificato

  • Overall
  • Quality
  • Value

Calidad

May 25, 2020

very good value for money, value for money very good, support sheets somewhat thin but give good consistency, made lack of central support to house the controller and a power distribution tray, that would be very good, they would only have to redesign the center sheet of the frame.

Andreas | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2016

I used this frame for a short time, because the holes are done badly. With well balanced 15" props there are too much vibrations even for a gimbal!!! It's not stable at all. When you will use it, use it with small motors and 12" props max. The max flight time I got with it was 30min, but it wasn't a nice flying via fav, because of the vibrations I hardly could see anything!!!

Janaka | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 16, 2015

What a waste. You get what you pay for. I ended up with genuine CW props and knock-off CCW props, and the slight difference in thrust at the same motor RPM caused the frame and super flexible arms to twist and yaw the quad in circles. Though correctly matching props are clearly called for, the HUGE amount offlex in the arms and lower / dirty frame of this quad made it a complete waste of my time to build. My AUW was around 2.5kg - I tried to build this around a 6s 4000mah system and a mid-size gimbal and camera. I suspect this would only work with a GoPro and a lightweight setup.

jamie | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2015

Awful kit. Don't buy it. Very flimsy, not well machined. The frame is not symmetrical when assembled.

pat12 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2015

simple fantastic. i have not used this for long but it is my first Quad copter frame and i think that it has been a good one to chose. I have been using it on grass and it has suffered lots of accidents but all in all it was great and there is NO damage to the board. i would recomend you use the NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version) motors and the Afro ESC 30Amp Multi-rotor Motor Speed Controller (SimonK Firmware) ESC's with Slow Fly Electric Prop 12x4.5R SF (4 pc - Green Right Hand Rotation) propellers as well as left hand turning ones and a 4 cell battery for me this set up has worked great. thanks for reading this, cya

Tarek | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 04, 2015

You pretty much get what you pay for. I've ordered this frame before and it was beside one drill hole fine. The second was missing all the drill holes for the rubber balls. Not a big deal for me. And the rest of the frame is descent and if you crash it (like I did), the replacement is not that big of a deal. I recommend this frame.

Zebolc | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2015

This is nice big frame with a lot of space on it and it is cheap.
However it has few drawbacks:
- it is heavy, 500g
- arms could be longer, they can fit maximum 13" props
- little too elastic for my taste
- plates are made of tick plexiglass (12.5mm) instead of carbon fiber
- there are no hols for rubber dumpers, and once you drill it your self those holes violate structural integrity of plates
- holes made for gears on plates are made in a way that makes you difficult to attach some of your gears so you have to improvise

All 4 arms are black but I like it that way, it looks cool, and if you want better orientation you can put some colorized LEDs.
I have put some pictures in file section of my build. I'm using Multistar Elite 4007.740 motors, 12" 5.5peach propellers, 4.5Ah 3s battery, Crius v2 FCB and 20A Afro Slim ESC. total weight is 1750g, but I plan to add one more 4500mAh battery and d13" 5.5peach props. That should give me 15 minutes of flight time with good maneuverability.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 14, 2015

This is a great frame. I have 14 inch blades on this build. If you do Use 14 inch props you will be cutting in close but still it makes for a nice long flight time! I suggest the use of m3x11MM vibration isolation grommits! They fit well! Enjoy!

Maksim | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 13, 2015

2210 turnigy

DodgeHobby | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 11, 2015

A lot of gear for little money!

Nice easy build, some spares in mine (I hope they're spares!) And plenty of room. SJ400, APM GPS, 4x ESCS, FrSky Rx, FPV cam, Vtx and batt. And enough room to fit it all on again.

  1. 1
  2. 2
  3. 3
File dei clienti
No File Name Download [3519]
folding version Download [476]
folding version Download [476]
folding version Download [476]
perfectly tuned and tested build i have Download [391]
front view of gimbal mount with out cont Download [3130]
top view of just mounted gimbal Download [2969]
side view of my gimbal mounting system Download [3438]
Quad Just built and flown Download [558]
No File Name Download [3035]
  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!