Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global
  • USA

Dipartimento Funzione sistema di riscaldamento universale

Dipartimento Funzione sistema di riscaldamento universale

QTY:

Now save risparmia 0,00 € 0,00 €

13,57 €
Stock:
Peso:
310 g
SKU:
HK-Heater

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Descrizione
prodotto

La regolazione della temperatura caratteristiche Dipartimento Funzione universale riscaldatore sistema e un sensore termico per consentire il controllo della temperatura da 30 a 80 gradi celcious. Con una gamma di tensione di 7.4V a 12v riscaldatore può essere alimentato da una 2s per lipo 3s. Aggiungere uno al tuo guanto trasmettitore e volare nel lusso di questo inverno, scaldare le gomme della vostra auto o pre-riscaldare la lipo in inverno o anche d'estate per le migliori prestazioni.
Pre-riscaldamento di un pacco Lipo al 30degC in inverno darà al vostro modello di prestazioni molto migliori, fin dall'inizio.

Specifiche:
Input: 7.4V a 12V
Temperatura: 30 ~ 80deg Celsius
Sensore: LM35DZ - Precisione centigradi sensore di temperatura
Pastiglie di calore: 310x80mm
Amp Draw: 5.2A @ 12V
Connettore di ingresso: 2 x morsetti a coccodrillo

Product
Specifications

Ulteriori informazioni

  • SKU:
    HK-Heater
  • Brand:
    HobbyKing
  • Peso (g)
    310.00
  • Lunghezza
    180.00
  • Larghezza:
    65.00
  • Altezza:
    95.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Always make your hands warm in winter while model control
Quality
Value
Overall
Quality
Value
Overall
very good product! Aplusplus
Quality
Value
Overall
Quality
Value
Overall
I mounted all the components excluding the heating pads on a 5 inch by 8 inch quarter inch plywood mounted with HK wide blue velcro between the hand holds so as to keep the top of the glove well above the bottom of the glove. This helps keeping your hands off of the heating pads which are place to the sides of the bottom of the glove. This arrangement with the heaters in series on a 3S LiPo is a comfortable arrangement.
Quality
Value
Overall
Quality
Value
Overall
This heater is fantastic if you use it correctly. Either use it with a 2S LiPo as received, or re-wire it so that the two heaters are connected in series and run it on 3S. This avoids the heating pads getting very hot as stated by others.
In series on 3S it takes about 2 amps when the LiPo is at storage voltage (about half discharged). This is sufficient on fairly cold days since in another review it stated that at 3S it used about 1100 mAh for 1 hour at -15 degrees C (5 degrees F) hence at an average of 1.1 amps, so 2 amps for the series connection is sufficient.
I chose to make allowances for even colder weather and replaced the four pin cable connector with a 10amp DPDT switch with a center off position (from Radio Shack). This allowed me to switch between parallel heaters and series heaters or off with a 3S LiPo. The heating power is about 120 watts for parallel and about 30 watts for series heater connections, and I only use the 120 watts for a quick pre heat of the glove. However if the temperature never goes below 5 degrees F (-15 degrees C) then you only need the series connection for 3S operation
Quality
Value
Overall
Quality
Value
Overall
Perfekt fr kalte Tage
Quality
Value
Overall
Quality
Value
Overall
Draws 5,5 amps from 3S 2200mAh LiPo. Temperature sensor is installed into one pad only, but this is not an issue while pads are installed into similar coditions. Make sure you use separate LiPo low voltage buzzer to protect your battery.
Quality
Value
Overall
Quality
Value
Overall
Great Heater nice and compact! Will be used throughout the winter months to keep hands/lipos/telescope lens warm and dew free. Have swapped the croc clips for a deans
Quality
Value
Overall
Quality
Value
Overall
Just got mine the other day 10days to Canada is awesome !
I have bench tested it and so far looks and works awesome and a big they have pre installed the temp sensor already into one of the pads so Hobby King had listened way to Go HK !!
Quality
Value
Overall
Quality
Value
Overall
For winter flying a good tool to bring/hold the bateries at ambient temperature. Recommended item.
Quality
Value
Overall
Quality
Value
Overall
Very tiny box, it was astonished. I soldered a XT60 to it as replace of the one what came with it. It heats up very fast, I used 3S battery. Has to be careful never to turn it full scale. I use this in my glove box for the winter, awesome! Recommended!
Quality
Value
Overall
View all reviews
Upload
Videos
  • HobbyKing Universal Heater System

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.