Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dipartimento Funzione Wireless Tracker batteria w / Free batteria 869.5Mhz

Generating Links

Dipartimento Funzione Wireless Tracker batteria w / Free batteria 869.5Mhz

Prezzo:

Now save risparmia 0,00 € 0,00 €

28,81 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
HK-Traker8695
Spedizione gratuita? Clicca qui per saperne di più!
Desidera si può conoscere il voltaggio della batteria Lipoly mentre si vola?
Vuoi essere in grado di sapere con precisione quando il pacco è in procinto di caduta di tensione?

La Nuova - & - Migliorata Dipartimento Funzione Pubblica della batteria wireless inseguitore controlla la tua LiPoly tramite la spina di carica e restituisce un segnale al ricevitore. Se una delle vostre cellule scendere sotto 3.6V il LED per quella cella diventa rosso. Una volta che la cellula scende al di sotto 3v il LED lampeggerà e il cicalino emette un segnale acustico, la segnalazione di atterrare il più presto possibile.
Questa unità è anche un ottimo modo per trovare quelle batterie che la caduta di tensione notevolmente sotto carico.
Il trasmettitore opera su 869.5Mhz banda FM e può monitorare 2S alle batterie 6S.

Spec.
Trasmettitore Peso: 7g
Ricevitore Peso: 35g (questa è la parte a tenere in tasca)
distanza di segnale: Intorno 300-400mtr
Batteria: 7.4V / 2 cellule (in dotazione)
Uso;
Assicurarsi che il ricevitore portatile è acceso ed è stata selezionata il numero di cellule prima. Una volta fatto questo, quindi collegare il trasmettitore dentro l'aereo alla spina batterie equilibrio. Se non lo fai in questo ordine, la lettura non sarà corretto.
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

giovanni | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 22, 2012

prejudice to the product I purchased and a great product that meets my visa application quality 'money. shame that you can not adjust the potentiometers so that' have a precision of the receiver when the battery discharge

johnno | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2012

A fantastic product! I have used it in both an RC boat and a touring car. The boat uses a large brushless motor that can use up to 80Amps and the monitor was fantastic at not only showing the current voltage of the cells but under acceleration it was also useful to monitor the overall health of the individual cells in the lipo pack, showing clearly that a couple of the cells where dropping voltage compared to the rest of the pack.

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 24, 2011

I purchased this peace of garbage with great expectations, well at least with the expetation that it would work for more than 10 seconds. It seemed to work out of the box when i initaly tested it, put it away for a couple of weeks when i went to install it the reciever was completly dead. I maid sure it had enugh voltage , charged it to capasity and no love, the antenna broke off from the base of the unit and DEAD! save your money

Anthony | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2010

Unfortunately, everyone is right. This is a terrible product. I ordered it with the hope that the reviewers just got a dud unit. Well, only 2 out of the 6 cell LEDs work. Surely the factory can have better quality control than this! HK, ditch this product.

isaac509 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 07, 2010

This is really a terrible product. Not only were half the LED's burned out on the reciever when we got it, the transmitter seems to draw a lot of power from the battery.

I think you need to spend more for a decent solution.

Sunwalker | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 03, 2010

Funktionier ganz gut etwas mehr reichweite wrde nicht schaden

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 30, 2009

Super geniale Hilfe beim Modellflug dieses kleine gadget ist echt der Hammer

Valek | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2009

On first times beeps occur after 2-3 minutes of flight (usual flight time for my plane is 10-11 minute). And now alarm and beeps starts immediately after fully charged battery connection. Fully unusable. Not recommended.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 18, 2009

I would appreciate a LiFe version ! I guess the potentiometers are trims for voltage measurement of cells 3 to 6, but it's just a guess, I didn't test it.

The channel is selected by jumpers on the transmitter and the receiver. For the 869.5 MHz I bought, the jumpers J1 and J2 are closed, J3 is open. 3 stars only because it starts beeping when one cell drops under 3.6V, so it beeps almost all the time. Louder beeps that occur under 3V are enough.

TERRY270 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2009

Excellent product. Using a 2x3s>6s splitter you can monitor 2 x 3s batteries in either parrallel or series. I am personally using HK's TWIN PACK CHARGE LEAD to monitor 2 3s packs in parallel for the same price as a splitter - simply don't use the heavy guage red & black > deans connector for this application.

  1. 1
  2. 2
  3. 3
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!