Paese
Stati Uniti
 
Shipped From:
  • United States (US)

Dipartimento Funzione Pubblica X550 fibra di vetro Quadcopter 550 millimetri telaio

Dipartimento Funzione Pubblica X...

Il Dipartimento Funzione X550 è un telaio pieghevole quadcopter braccio di alta qualità che offre grandi sguardi e prestazioni ad un prezzo che non può essere battuto! Costruito dal peso leggero in fibra di vetro ancora rigido e alluminio, la X55...
9323000036

Now save risparmia 0,00 € 0,00 €

21,82 €
447g
9323000036


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Riassunto

Il Dipartimento Funzione X550 è un telaio pieghevole quadcopter braccio di alta qualità che offre grandi sguardi e prestazioni ad un prezzo che non può essere battuto! Costruito dal peso leggero in fibra di vetro ancora rigido e alluminio, la X550 offre una grande combinazione di leggerezza e resistenza.

Questo quad dispone di armi che lo rendono facile da trasportare e conservare pieghevole. Le braccia sono anche due colori diversi per l'orientamento, argento e rosso, quindi è facile per mantenere il vostro quad volare nella direzione giusta.

Questo telaio quad supporta anche una telecamera tilt monte che permette trasportare una vasta gamma di telecamere. (Vedi prega di elementi correlati al di sotto di montaggio telecamera opzionale)

Offriamo una linea completa di elettronica multi-rotore, come scheda multi-rotore di controllo, ESC, motori e di più, così non è mai stato più facile o più conveniente per ottenere un quad in aria!

Tutto l'hardware necessario è incluso, basta aggiungere i propri elettronica.

Specifiche:
Peso: 312g (solo Frame)
Larghezza: 550 millimetri
Fori motore Bolt: larghezza 19 millimetri

richiesto:
scheda di controllo multi-rotore
15 ~ ESC brushless 25A x 4
batteria 3S 1800 ~ 2200mAh LiPoly
28-XX 1100 ~ 1300KV motore brushless x 4
elica 8x4 - 2 rotazione standard / 2 retromarcia

Nota: Tutti i telai della serie Dipartimento Funzione X vengono acquistati fabbrica diretta. Abbiamo lavorato a stretto contatto con gli ingegneri in fabbrica per garantire la qualità. Tutti i telai della serie X sono taglio CNC e con precisione fresato a differenza di molti dei telai a basso costo disponibili da Ebay o fornitori cinesi che sono perforati a mano in basso fabbriche tecnologia. La serie X Dipartimento Funzione dispongono anche più spesse lastre principali GF per stength aggiunto.

Specifiche

Ulteriori informazioni

  • Conte lama:
    N/A
  • Diametro X (pollici):
    No
  • SKU
    9323000036
  • Watt Hour
    0.00
  • Peso (g):
    447.00
  • Lunghezza:
    280.00
  • Larghezza
    60.00
  • Altezza
    160.00
Discussioni
Recensioni

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati

Excellent job. My order from the East warehouse arrived super quick. All parts were in the box and the frame was as advertised. Easy assembly. Being in the U.S., the postage was very reasonable. Thanks, HK !
Great frame for the money. Fits a KK2 & PDB quite happily. Quality of the plates surprised me, nice clean milling & edges. The aluminium used on the arms is strong yet light, it does deform when you tighten stuff down but I had to seriously torque stuff before they bent. Only disappointments were the arms came scratched quite a bit, the anodizing is very light and doesn't take much to scratch through it. It was missing the 3x25mm bolts, you get what you pay for though.
Really good frame. Had no issues with it. Motors will mount with only 2 bolts. not a lot of room for FPV or camera stuff. Very stable and stiff. Extra width goes along way for stability in a quad, i would say that counts for a lot more than any carbon props will.

Lachko zlozitelny. snad vydrzi
Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good coveringg
The Red/Black does help with orientation but only up to about 100 yards; after that there isn't enough contrast to really tell the orientation. There weren't any instructions or assembly diagrams so it took a while to figure out what screws went where. They need to put an assembly diagram under the files tab. I assembled with a Q-Brain 25Ax4 ESC, unfortunately the area between the legs was just a few mm too small to fit the ESC so there wasnt really a good place to put it. Sturdy and handles some pretty hefty crashes well.
I got this frame recently and it is awsome!
It's strong and very light and the folding feature is awsome, just make sure you tighten the legs a bit and do about half a turn back so you can slide it but it wont be wiggly and loose.

Do note the guide doesn't tell you to use the washers a hole lot of times despite there being enough for any screw you'd be using so do add them each time!

The manual also overlooked the fact that the metal spacers should be placed on each leg bit so keep that in mind as well!

The KK board can fit exactly on top instead of the glass fiber piece you get so that is nice as well!

I would like to see the camera attachement to be stocked in europe as well though.
nice build quality

-good cutting

-precision

-extra plastic spacer

-easy to assemble
This frame is quite good value and I am pleased I chose it for my first quad. Like some others, it is a good idea to insert wood blocks in the ends of the arms to prevent them from being crushed by the mounting and motor bolts. The hardware supplied is good and adequate and includes a battery strap. It needs legs mounted on the main frame for landing as after a while or after a heavy landing the arms tend to bend up and have to be straightened periodically.
In this one I use a KK2.1 FC board and SK3 2830 Turnigy Aerodrive motors with 9x4.7 Turnigy props and 30 Amp Turnigy Plush ESCs. I use 2450 and 2650 35C batteries. It also goes OK with 1800 35C batteries.
I cut some rings off a broom handle to insert on the legs as ' landing wheels' just to give it a little more ground clearance.
It is a steady frame and can go like a rocket if you want it to, but is also very docile when required.
To sum up, I am quite happy with this frame.
primer intento de quadcopter
View all reviews
Video
  • HobbyKing X550 Glass Fiber Quadcopter Frame

Upload video
File

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.