New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione Pubblica YEP 45A (2-6S) SBEC Brushless Speed ​​Controller V2

Dipartimento Funzione Pubblica YEP 45A (2-6S) SBEC Brushless Speed ​​Controller V2

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000291-0
WANT FREE SHIPPING? Click here to find out more!

Ora siamo orgogliosi di offrire la nostra serie Dipartimento Funzione YEP ESC. Con l'elicottero specifiche opzioni di programmazione come il super liscio soft start, la modalità RPM fissi (modalità governatore) e ultra alta risoluzione, non troverete una migliore ESC elicottero oggi sul mercato!

Abbiamo testato queste unità sui nostri elicotteri e li ha trovati per essere tra i migliori che abbiamo mai visto. Il soft-start super liscio, insieme alla sua risposta del gas ultra alta risoluzione pone questo CES in una classe a sé stante!

Dipartimento Funzione Pubblica YEP CES sono costruiti con componenti di altissima qualità per garantire true-to-valutazione gestione corrente e funzionamento ad alta efficienza.

Tutti i CES Dipartimento Funzione YEP possono essere programmati tramite carta di programmazione opzionale o dagli ingressi stick.

Caratteristiche:
• Potente 5.5V / 6A commutazione BEC
• Scheda di programmazione opzionale per l'installazione conveniente
• ESC ha portato la programmazione separata built-in quindi non c'è bisogno di staccare la spina dalla RX
• Risoluzione acceleratore Super multa fornisce di prima classe e linearità di alta precisione
• modalità di avvio regolabile Super liscio
• Modalità RPM costante (modalità regolatore)
• Freno F3A regolabile.
Freno EMF normale • 3 punti regolabili
• Elevata capacità anti-interferenza
• Protezione cut-off in bassa tensione con regolazione automatica per NiCd / NiMH / Li-Ion / LiPo / LiFePO4
• soft opzione cut-off a bassa tensione, rallenta giri motore graduale piuttosto che di taglio duro (LVC)
• bassa tensione di cut-off può essere disabilitata
• Variabile tensione di cut-off / cell
• Circuito a ruota libera attivo permette per un numero illimitato capacità di "carico parziale"
• Indicatore di stato a LED
• temporizzazione del motore regolabile da 0 ° a 30 °
• Protezione di rotazione bloccata (rileva un motore inceppato e si ferma la rotazione del motore)
• Motore inversione da ESC (nessuna necessità di cambiare cavi / Motore ESC)
• allarme di protezione sovratemperatura e il sovraccarico
• Circuito anti scintille: riduce le scintille di connessione (per HV ESC)
• Protezione perdita di segnale della valvola a farfalla. Se il segnale è perso per 3 secondi, la potenza viene automaticamente cut-off.
• accensione di sicurezza. (Il motore non si avvierà fino a farfalla viene restituito alla posizione più bassa)

*** Questa ESC è compatibile con entrambi i modelli di elicotteri e aerei. ***

Specifiche:
Max Cont corrente: 45A
Max Burst corrente: 55A per 10 secondi
Batterie 2-6 celle Li-XX o 6-16 Ni-MH / Ni-Cd: Tensione in ingresso
BEC: 5.5V / 6A commutazione BEC
PWM: 8 ~ 16 KHz
Max RPM: 240,000rpm per 2 Poli motore brushless
Dimensioni PCB: 50x34mm
Peso: 50g (compresi i cavi)

  • SKU 9171000291-0
  • Brand -
  • Capacità ( mAh ) -
  • Peso 67.0000
  • Lunghezza 110.00
  • Packaging Width 25.00
  • Altezza 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

For the money, these are about the best ESC's available. Beautiful super slow startup for helis, and thereafter very quick to react to throttle inputs. Superb! Running on a 450 with 6S setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the money, these are about the best ESC's available. Beautiful super slow startup for helis, and thereafter very quick to react to throttle inputs. Superb! Running on a 450 with 6S setup.

very nice ESC with the programing wire separate from the signal one. easy to program with the card and seems like a very good quality ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice ESC with the programing wire separate from the signal one. easy to program with the card and seems like a very good quality ESC.

Der Regler ist einfach genial. Der Governor Mode regegelt absolut stabil , auch bei 60pcnt Reglerffnung. und wird nicht warm. Ich fliege den regler in einem Mini Titan E325S seit 80 Flgen ohen die geringsten Probleme . Das BEC ist mehr als ausreichend und stabil. Unbedingt die Programmkarte dazukaufen. !!sonst ist dei Programmierung ein Quler

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Der Regler ist einfach genial. Der Governor Mode regegelt absolut stabil , auch bei 60pcnt Reglerffnung. und wird nicht warm. Ich fliege den regler in einem Mini Titan E325S seit 80 Flgen ohen die geringsten Probleme . Das BEC ist mehr als ausreichend und stabil. Unbedingt die Programmkarte dazukaufen. !!sonst ist dei Programmierung ein Quler

YEP's ESC's are OK, but NOT this model (V2) I have only YEP's, but this one has a lot of ripple on the 5 V rail ( 1.55 V peak to peak). The peak voltage is very close to 7 volts. I was able to hear the switching noise in the receiver. Not good at all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

YEP's ESC's are OK, but NOT this model (V2) I have only YEP's, but this one has a lot of ripple on the 5 V rail ( 1.55 V peak to peak). The peak voltage is very close to 7 volts. I was able to hear the switching noise in the receiver. Not good at all.

I connected mine to a tarot 1700kv motor. I tried every settings of timing but still, the motor bogs. I tried until the ESC burned for no reason.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I connected mine to a tarot 1700kv motor. I tried every settings of timing but still, the motor bogs. I tried until the ESC burned for no reason.

An up date.
ESC is been working fine, no more power fluctuations.
Don't know what to blame but what I did is to calibrate end points and gov store several times with the right timing and PWM frequency for my set up. Fb with 450mx 3400.
Not sure if this had something to do with the servos twitching, don't think so.
But ESC is doing what it suppose to do, happy with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

An up date.
ESC is been working fine, no more power fluctuations.
Don't know what to blame but what I did is to calibrate end points and gov store several times with the right timing and PWM frequency for my set up. Fb with 450mx 3400.
Not sure if this had something to do with the servos twitching, don't think so.
But ESC is doing what it suppose to do, happy with it.

I also have problems
When connecting to my receiver you could hear a small beep from the receiver again.
my voltmeter gave 6 volts.
when I got my motor connected and slowly brought up to speed this was stuttering runs.
Also the servo's stuttering start running back and forth.
After full throttle there was smoke coming from the esc.
Direct the batt disconnected no idea if it is faulty, but I'm done.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I also have problems
When connecting to my receiver you could hear a small beep from the receiver again.
my voltmeter gave 6 volts.
when I got my motor connected and slowly brought up to speed this was stuttering runs.
Also the servo's stuttering start running back and forth.
After full throttle there was smoke coming from the esc.
Direct the batt disconnected no idea if it is faulty, but I'm done.

I installed the yep 45a esc v2 on a trec 450l dominator 6s with kst215mg on cyclic and kst515mg on the tail. Using a Futaba CGY750 flybarless unit with S-Bus receiver. The yep 45a v2 works great. Love the governor store function.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I installed the yep 45a esc v2 on a trec 450l dominator 6s with kst215mg on cyclic and kst515mg on the tail. Using a Futaba CGY750 flybarless unit with S-Bus receiver. The yep 45a v2 works great. Love the governor store function.

Received my yep 45a esc v2 with the program card today and installed it on my trex 450l dominator. I got 5 flights on it and it works great. I have kst215mg servos on cyclic and align ds525mg on the tail. Governor store also works great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my yep 45a esc v2 with the program card today and installed it on my trex 450l dominator. I got 5 flights on it and it works great. I have kst215mg servos on cyclic and align ds525mg on the tail. Governor store also works great.

same problem, BEC output is 5.85V with peaks over 6.8V, all servos twitch and movement isnt smooth. Same servos with Plush 30A work perfect. So I can not recommend to buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

same problem, BEC output is 5.85V with peaks over 6.8V, all servos twitch and movement isnt smooth. Same servos with Plush 30A work perfect. So I can not recommend to buy.

  1. 1
  2. 2
Customer files
No File Name Download [102]
YEP TX Programming Download [102]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save