HobbyKing® ™ EZ Master Trainer EPO 1.230 millimetri (PNF)

• Overall
• Quality
• Value

Customer Rated

Aug 23, 2016

THIS PLANE NEEDS MODS DONE BEFORE FLYING
WING DOWELS - 1020 KV MOTOR- EPOXY GLUE WING PLATE IN FUSE AND LANDING PLATE IN FUSE - EPOXY TAIL PLANE IN PLACE AND BOLT IN - FRONT NOSE LEG HORN VERY WEAK DON'T OVER TIGHTEN HORN SCREW BREAKS PLASTIC HORN - EPOXY ON TOP OF LEG HORN (STRONGER ) - 3 degs DOWN THRUST 2 DEGS RIGHT TRUST IN WITH 1/8 WASTERS - E 10/ 7 PROP
- ZIPPY 3S 2200 LIPO BATTERY - EPO FOAM IN FUSE UNDER FRONT WING LEADING EDGE PLASTIC WING HOLDER HOT WIRE OVER GAS STOVE MAKE THE FRONT AREA BIGGER FOR RECEIVER TO PUSH BACK IN THERE UNDER FRONT WING HOLDER ON FUSE KEEP SERVOS CABLE AWAY FROM SERVO HORNS FOR RUDD/ & ELEV/ HOT GLUE SERVOS IN WING AND FUSE

• Overall
• Quality
• Value

Customer Rated

Aug 23, 2016

HK THE NOSE LEG ON THIS EZ MASTER TRAINER NEEDS REBUILDING
THIS IS NOT GOOD FOR NEW PEOPLE TO THE HOBBY

• Overall
• Quality
• Value

Customer Rated

Jul 17, 2016

Well I would give it 5 stars on quality if the wheel axle would fit the base. Somehow someone messed up so I pulled the wheel base and expanded it by drilling. The servos also needed recalibrating. But it flies smooth and makes also great trainer, nice appearance. I love ❤ this plane.

• Overall
• Quality
• Value

Customer Rated

Jan 30, 2016

On the first flight I was surprised to find that it was not aerobatic at all. It is under powered. My Phoenix glider does better rolling circles than this. I could hardly fly it inverted. After trying that I wanted to try a large loop. And as I came out of the loop slowly the wings fell off. They came out of the plastic clip in the front which was dreadfully thin. It flew like a very beginner trainer. Not anything aerobatic. If you want a good trainer get the Phoenix 1600. It is much cheaper and solid as a rock. Just be sure to tighten the screws in the motor or it will fall off. If you do get the EZ master be sure not to bump the elevator stick to far or the wings will come flying off. Also when we got it the ESC was fried right out of the box.

• Overall
• Quality
• Value

Customer Rated

Jan 30, 2016

On the first flight I was surprised to find that it was not aerobatic at all. It is under powered. My Phoenix glider does better rolling circles than this. I could hardly fly it inverted. After trying that I wanted to try a large loop. And as I came out of the loop slowly the wings fell off. They came out of the plastic clip in the front which was dreadfully thin. It flew like a very beginner trainer. Not anything aerobatic. If you want a good trainer get the Phoenix 1600. It is much cheaper and solid as a rock. Just be sure to tighten the screws in the motor or it will fall off. If you do get the EZ master be sure not to bump the elevator stick to far or the wings will come flying off. Also when we got it the ESC was fried right out of the box.

• Overall
• Quality
• Value

Customer Rated

Aug 25, 2015

Nice but a little bit heavy flyer with some tipstall characteristics available..Stock motor not powerful enough in windy conditions, changed mine to 2200kv and it flies much better with shorter take offs. Also spare parts would be greatly appreciated. Stock them please!!!

• Overall
• Quality
• Value

Customer Rated

Apr 27, 2015

This is my 2nd review of this plane. After trying to fly this plane I have found out it is very under powered and not a trainer like it said it is. There are no spare parts for this plane. Anyone buying this plane for a trainer you should offer replacement parts. I had to buy 2 of the planes for spare parts. i am going to try other props to see if I can get it to get off the ground and be able to get some speed out of it. It fly's right at stall speed out of the box. Also going to put a bigger motor in it to see if that will help.
Will update this post later...

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 16, 2015

This is a nice plane.Parts all fit and it looks good to. Just finish putting it together.It has room to put a flight stabilizer in it so for a 3rd of the cost of a trainer from Horizon you have a great trainer. I am going to use it to teach kids in the neighborhood .

• Overall
• Quality
• Value

Customer Rated

Jul 21, 2014

Great beginner plane. Very easy and sturdy assembly. Maiden flight was completed with very little trim required. I am running a 2200mah 3s with plenty of power. The 1800mah 3s gives a little more room in the undercarriage compartment but either will work. While this is a great beginner plane an experienced pilot will also like the fact that it is comfortable performing rolls, inverted flight, outside and inside loops and stalls. Only negative might be spare airframe parts. HK doesn't seem to sell them.

• Overall
• Quality
• Value

Customer Rated

Jun 20, 2014

Followup to previous post. Plane is super stable in the air and very forgiving. Can fly amazingly slowly without stalling, no nasty traits at all. Beware though that the forward wing mount is a bit of a weak point, found out the hard way when doing some aerobatics which were probably beyond the planes design and mid flight the wings parted from the fuse. Wings fluttered down gently and fuse speared in from about 100mtrs...not pretty but was able to hot glue all the bits back together . Looks like Frankenstein but still heaps of fun to fly, has become my current favorite. Will load a bit of footage on the video link.