HobbyKing® ™ Mini-3D GeeBee Laser Cut Kit 600 millimetri (KIT)

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 11, 2014

This thing is a lot of fun. The instructions aren't great, but that's kind of expected of a scratch build in this price range.

• Overall
• Quality
• Value

Customer Rated

Apr 29, 2013

This airplane lazercuts are not all the way through. So I had to use my scroll saw to cut plane out. Why did I buy a kit if I had to cut it out?

• Overall
• Quality
• Value

Customer Rated

Jan 31, 2012

Kit arrived in UK just before christmas well packaged and undamaged, However the long stripwood parts were missing. I decided to complete model using my own strip parts. When reported to Hobbyking they made it so awkward to supply the info they required that I had to give up. Its a poor reflection on H.king and staff. If I was trying to be dishonest I would have claimed more than just the strips.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 25, 2011

Great kit, only Issue I had was the manual calls for the fusealge to be built upside down. The vertical fin is on the wrong side of the fuse in the pictures.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 28, 2011

1. The laser cut is not all the way through in some places.

2. Laser cut is smaller than the peice that fits into the openings meaning you need to do a trial fit up an a lot of trimming. Still better than die stamped, but could be a lot better.

3. Warped wood included so you will spend time straightening peices.

• Overall
• Quality
• Value

Customer Rated

Jun 10, 2011

Kit is a complete kit. I used the item PRODUCT ID: NS12415x10 and PRODUCT ID: MH23146-4 for making the linkages. 2xHXT500 servos for elevator and rudder, 1xHXT900 for aileron. Some trimming needed for 9gr servo placing. Made the landing gear with 3mm carbon rods and PRODUCT ID: OR006-00601. Used PRODUCT ID: Tz12A as ESC and HXM2730-1300 as motor. Also there is a big mistake in the manual when placing the F part on the A part. Do not stick these parts according to the manual because in the manual F part is sticked under the A part, not over it! Thank you HK.

• Overall
• Quality
• Value

Customer Rated

May 02, 2011

I found someone (BoingK @ RCgroups) who has built this:

Seems you need:
4 x horns
CA Glue
A 9g servo in the wing instead of the 5g
4 x Pushrods
some Hinges or Tape
Battery strap (for fixing the battery)

According to BoingK @ RC groups:
http://www.rcgroups.com/forums/showthread.php?t=1423870#post18116314

"C20 motor fits well once you trim the fibreglass base"
"400g of thrust with an 8 inch prop on 2-cell"
"weight 220g or so ready to fly"

• Overall
• Quality
• Value

Customer Rated

Apr 14, 2011

Kit arrived well packaged and undamaged. Total weight including balsa sheets, instructions and clear plastic bag is 184g. The balsa is of uniformly grained, good quality wood. Instructions have pictures as well as text and are very easy to follow, they also specifically recommend the C20 motor, 8x4 props and a 2s 800mAh lipo.



I will post pictures and video of fully assembled kit upon completion.



I give this kit 5 stars, but shipping was expensive. This could be avoided if they stocked in local warehouses (USA, Europe, Australia etc). To help get better value from the shipping I bundled servos, ESC, motor, props, covering film and control horns with it. This worked out well and I would recommend it to others.