Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dipartimento Funzione Pubblica ™ Bix3 Trainer / FPV EPO 1.550 millimetri (ARF)

Generating Links

Dipartimento Funzione Pubblica ™ Bix3 Trainer / FPV EPO 1.550 millimetri (ARF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

74,94 €

This item is no longer available.
Updated or similar products shown below:

H-King Bixler 3 Glider 1550mm (61") Kit

  • Stato:
    disponibile
    SKU:
    9310000335-0

    Now save risparmia 20,36 € 20,36 €

    Special Price 81,41 € 81,41 €

    You save risparmia 20,36 € 20,36 €

    Was  101,77 €

Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9310000204-0
Spedizione gratuita? Clicca qui per saperne di più!

Giunto alla sua terza generazione, Dipartimento Funzione ™ ti porta il Bix3, l'ultima piattaforma di formazione aereo e FPV. Il Bix3 è la versione più grande, più versatile e completo del suo lignaggio familiare. Venendo con l'ingranaggio rimovibile atterraggio, vassoio di FPV compensato, skid ventre di plastica, e le falde opzionali, è possibile personalizzare il Bix3 esattamente come si desidera. Guardando per l'allenatore perfetto? O una piattaforma di FPV in-costoso? Il HobbyKing® Bix3 è.

Il Bix3 ha tutti gli ingredienti giusti; in schiuma super resistente EPO, tutto è pre-installato in modo è richiesto tempi di montaggio minimi. Infatti, dal momento che avete caricato la batteria, che dovrebbe essere pronto a volare! La combinazione di dimensioni, a basso carico alare e di una fusoliera elegante fanno per un modello eccellente con caratteristiche di volo in grado, ma perdono. Lo snap insieme due pezzi dell'ala rende il Bix3 un modello pratico che è facile da trasportare al campo di volo preferito e può essere pronto a volare in pochi minuti.

Altre caratteristiche pratiche del Bix3 comprendono la grande area della batteria che può accettare una vasta gamma di formati di batteria o attrezzature casa FPV, più il Bix3 viene fornito anche con alette opzionali che possono aiutare a far fronte con il peso extra. Abbiamo alzato la posta sul Bix3 aggiungendo carrello di atterraggio coda dragger rimovibili, inclusi un ruotino di coda orientabile. Se non si desidera utilizzare il carrello di atterraggio abbiamo incluso un chiaro pattino pancia di plastica per proteggere meglio la fusoliera di schiuma. Aggiungendo la robustezza del Bix3 è un tubo di carbonio che corre lungo la lunghezza della fusoliera, fino alla ruota posteriore, in modo da scattare una fusoliera in mezzo è una cosa del passato.

Per il drogato FPV, abbiamo incluso un vassoio di montaggio un'opzione compensato FPV che sostituisce il baldacchino stock sport. Questo vassoio è perfetto per la creazione di una macchina fotografica con pan e tilt. Per una telecamera in posizione fissa, il naso è rimovibile, in grado di accettare piccoli 1 pollice forma quadrata telecamere fattore.

L'ala grande, flap e molto più grande zona baldacchino significano che il Bix3 è un aereo molto più versatile in termini di uso FPV e per i piloti che sono semplicemente Volo sportivo. Tuttavia si decide di volare il Bix3, si può essere certi che è altrettanto divertente e facile da pilotare come sempre!

Caratteristiche:
• Facile e divertente da volare
• Quasi pronto a volare - Installare la vostra scelta di elettronica
• Più grande zona tettoia per ospitare attrezzature FPV e / o più grande batteria di volo
• grande ala per una migliore volo lento e capacità di peso
• Facile slittare sul carrello di atterraggio con ruotino di coda orientabile
• Include compensato rimovibile FPV baldacchino Piattaforma montaggio
• alette opzionali
• ali 2 pezzi per un facile trasporto
• Tubo in carbonio corre lunghezza della fusoliera per resistenza superiore
• nasello removibile per accettare fotocamera FPV.

Specifiche:
Apertura alare: 1.550 millimetri
Lunghezza: 948 millimetri
Peso di volo: 890g

richiesto:
4 ~ 6 trasmettitore e ricevitore Canale
3S 11.1V 2200mAh Lipoly Batteria
4 ~ 6 9g Servi
2620 1400kv motore brushless
20 ~ 30A Brushles ESC
8x4 Elica

  • BIX3 Unbox and Build
  • FLY TYME - Bix3 FPV
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Marko | Acquirente verificato

  • Overall
  • Quality
  • Value

Super FPV Flieger

May 24, 2017

Super Flugzeug , ließ sich super zusammenbauen und hat ein echt tolles Flugverhalten auch bei Wind . Motor AXI 28/20 an einer 8,5*6" Luftschraube mit einem 3S 5000 MAh habe ich ca. 60 min Flugzeit bei Halbgas .

Javier | Acquirente verificato

  • Overall
  • Quality
  • Value

excelente producto

Mar 10, 2017

este es mi avion principal, es de lejos lo mejor que ha lanzado hobbyking en lo que entrenadores se refiere, sin embargo no se limita solo a aprendices, tambien es una excelente opcion para avanzados y quieren un vuelo versatil, pues puede ser muy agil o simplemente volar relajadamente, en mi caso lo dote con un motor 2200kv y una helice 7x4 sf, mejor conbinacion no se me pudo haber ocurrido, pues cuando es el caso le imprimo mucha velocidad, tambien un excelente planeador, con las corrientes de aire correctas he pasado mas de media hora volando, realmente aterrizo porque ya me duele el cuello!!!
la version arf viene solo con el fuselaje, accesorios, ruedas y algunas conexiones, pero igual vale la pena, recomendaria comprarlo asi mejor y dotarlo de un motor 2826-6 2200 kv o del motor 2826/10 ambos van bien con helice 7x4 sf y ESC de 50 amp, bateria de 2200 mah, asi mismo servos 9gr para los alerones van bien de piñoneria metalica.

Nicholas | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 27, 2016

This was my 1st every fixed wing plane. I liked it so much I bought another. Plenty of space in the front for a large battery.

I have the Turnigy Aerodrive motor with 40amp plush ESC. The plane has plenty of power and flies extremely well! I now have a decent size fleet of fixed wing planes but still favour the bix 3 as its simply great to fly FPV.

The kit is very easy to build and there are loads of tutorials and mods all over the internet.

As alway, with Hobbyking the delivery from the UK warehouse was extremely fast and excellent service!

Herishi | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 19, 2016

This plane is no where near as good as the bixler 1! I was really looking forward to getting the plane but it is such a handful to fly! the bixler 1 was great fun but the bix3 is like a punishment!

THIS PLANE IS NOT ARF - it is a kit!

not very impressed

Fizer | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 19, 2016

Ni more than an average plane. Great f beginners but even the beginner wil become bored with it. It does make an alright fpv platform for someone interested in getting to that portion of the hobby

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 10, 2016

This is a great plane to learn on. This was my first plane and it was amazing. I then switched it over to a FPV plane and it does that too! It has a lot of room inside of the fuselage for whatevery your needs may be. I put a 3s 4000mah battery in it for extended flight times.

shultitz | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 10, 2016

Nice model, but not precisely made: alluminium rod is suppose to fit into wings reinforcements, well...NADA! it is 0.1 mm to thick! no way to assemble the wings without exploding the wing reinforcements! This thing needs repairs before even having an occasion to crash!
Otherwise motor mount does not seem very well fixed to the structure of the plane, I'm not 100pcnt certain but it looks like it could move a little on its axis.
But generally the model looks good, in my opinion worth 40$ not 70-ish of ARF.

Jonathan | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 28, 2015

this plane is fantastic. the bix3 can handle anything you throw at it. i've strapped gopro's to it, mobius action cams, all sorts of equipment in all sorts of places. it doesnt even seem to notice. beautiful for fpv. i've modified it out to my hearts desire. 3536 1400kv motor, 8x6 sf prop, 50 esc, frsky L9R receiver, 600mw video tx w/ built in osd/gps, pan and tilt camera on the nose, and two 3s 4000mah in parallel as my flight pack. she flies several miles out and still glides great with all that weight. great plane design bixler, you know what your doing. very impressed.

Mad Maik | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 14, 2015

This plane is just so good for anyone, Beginner/experienced flyers



The ARF lets you use the smallparts cnc mount without breaking the whole plane. A very nice plane 5/5

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 03, 2015

tough trainer. but replacement parts can be hard to purchase as it is always in backorder

  1. 1
  2. 2
  3. 3
File dei clienti
Imax-B6_manual_francais.pdf Download [931]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori