New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione Pubblica ™ elettroliti 40 millimetri FES Micro Jet Composite 508 millimetri (ARF)

Dipartimento Funzione Pubblica ™ elettroliti 40 millimetri FES Micro Jet Composite 508 millimetri (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
411000006-0
WANT FREE SHIPPING? Click here to find out more!

Ti senti il ​​bisogno di velocità? Il Dipartimento Funzione ™ elettrolita mini jet sarà soddisfare questa necessità abbastanza bene. Originariamente sviluppato dal designer statunitense Dr. Bret Becker e venduto come kit di produzione limitata, è ora disponibile come quasi pronto a volare versione, risparmiando tempo e fatica. Lavorando a stretto contatto con il progettista sia sul sistema cellula e il potere, l'elettrolita che vedete qui è uno di circa il più veloce micro jet. Il prototipo originale è stato il primo micro FES superare 100 mph ed è attualmente in mostra al Museo di AMA a Muncie Indiana.

L'elettrolita dispone di una bella fusoliera in fibra di vetro preverniciati, con le ali balsa e la coda. Incluso nella confezione sono due diverse opzioni di pinne verticali. Poiché si tratta di un jet ad alte prestazioni, ha bisogno di entrare in aria rapidamente, così abbiamo anche incluso un mini kit di lancio elastico nella casella. Il cuore della batteria è la dotazione Sindone di alluminio, 8 lama girante, il Dr. MadThrust 40 millimetri unità EDF con 8000kv motore inrunner. Questo è il sistema di potenza sviluppata dal Dr. Becker specificamente per questo modello per dare la migliore prestazione senza assorbimento di corrente in eccesso.

Costruire l'elettrolita vorranno un paio di serate di lavoro. Anche se è quasi pronto a volare il modello, noi suggeriamo qualche precedente costruzione del modello. Avrete bisogno di un paio di strumenti, come un utensile rotante con pezzi assortiti, varie punte, resina epossidica, nastro adesivo trasparente, colla CA, carta di sabbia, coltellino, forbici, e po 'di pazienza.

Volare L'elettrolita è il vero e proprio trattamento. Si consiglia di utilizzare il kit di bungee incluso per i migliori lanci. Da lì, la sua valvola a farfalla piena per tutta la strada! Alta velocità passa, punto rotola sul ponte, in entrambi i casi, il suo un adrenalina giro per tutto il tempo. Controlla il Dipartimento Funzione ™ elettroliti 40 millimetri EDF, un piccolo modello che è grande divertimento!

Scarica elettroliti Manuale di istruzioni Qui

Caratteristiche:
• Quasi pronto a volare - assemblaggio finale completa, installare l'elettronica e volare!
• preverniciato la fusoliera in fibra di vetro stampato
• Include Lega Dr. Madthrust Fan e 8000kv motore ottimizzato per la cellula
• portello di accesso protetto magneticamente
• pre-ricoperto superfici alari e di coda con due opzioni pinne verticali
• Mini Kit bungee incluso per aiutare nel lancio
• Ultra ad alte prestazioni, in grado di 100 mph + costi
• pattini di atterraggio gancio Bungee e plastica

** Aggiornamento ** New elettroliti kit dispongono ora di fibra di vetro squadretta di controllo ascensore, non compensato come la prima esecuzione. Ulteriori piccoli perfezionamenti sono state implementate nel nuovo magazzino.

Specifiche tecniche:
Apertura alare: 508 millimetri
Lunghezza: 533 millimetri
Peso: 210g (w / o elettronica)
Unità di EDF: Dr. MadThrust 40 millimetri EDF w / 8000kv motore

Richiede:
3+ trasmettitore e il ricevitore Canale
25 ~ ESC 30amp
3S 11.1V 850 ~ 1300mAh Lipoly
3 * 4.7 ~ servi 5g

  • SKU 411000006-0
  • Brand -
  • Capacità ( mAh ) -
  • Peso 984.0000
  • Lunghezza 565.00
  • Larghezza 100.00
  • Altezza 170.00
  • Electrolyte Micro EDF Jet
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I can't say enough good things about this jet. NOTE::NOT FOR THE BEGINNER OR INTERMEDIATE. If you want to go fast, this'll do it. But you better have some go fast time under your belt! For the money, quality is good. May have to do some adjusting to canopy. EDF is well balanced and good running. I bought 2, should have bought 6 at the sale price of $47!! What a deal.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can't say enough good things about this jet. NOTE::NOT FOR THE BEGINNER OR INTERMEDIATE. If you want to go fast, this'll do it. But you better have some go fast time under your belt! For the money, quality is good. May have to do some adjusting to canopy. EDF is well balanced and good running. I bought 2, should have bought 6 at the sale price of $47!! What a deal.

nice quality composate and balsa kit ezy to put together however i dident like that you have to glue or hot glue elevator servo on the inside of the fuse and the the eleron servos where set up on the bottom of the plane so i modifyed the fuse to use the eleron servo arms on the top as to not damage the horns and push rods on landing.other than that is a small plain and fast with supplied DR Mad 40mm Edf setup,,Not recommended for beginners and also comes with bungee launcher.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice quality composate and balsa kit ezy to put together however i dident like that you have to glue or hot glue elevator servo on the inside of the fuse and the the eleron servos where set up on the bottom of the plane so i modifyed the fuse to use the eleron servo arms on the top as to not damage the horns and push rods on landing.other than that is a small plain and fast with supplied DR Mad 40mm Edf setup,,Not recommended for beginners and also comes with bungee launcher.

HobbyKing Electrolyte 40mm EDF Micro Jet Composite 508mm (ARF).

Bungee take off is rather fun, not really a 100mph plane to me but for the size of the edf it's rather fast for what it is. Will experiment a little more with the tubing and shrink it to sub 30mm diameter to hopefully make it a little more fun/faster.

Overall weight was 430g and motor stated at 400g of thrust so a little off 1:1.

I'm relatively happy with the kit - especially the edf unit. however a little disappointed with overall performance of the plane

Magnets in hatch need to be aligned a little better as there is a few mm gap as stated in a previous review.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

HobbyKing Electrolyte 40mm EDF Micro Jet Composite 508mm (ARF).

Bungee take off is rather fun, not really a 100mph plane to me but for the size of the edf it's rather fast for what it is. Will experiment a little more with the tubing and shrink it to sub 30mm diameter to hopefully make it a little more fun/faster.

Overall weight was 430g and motor stated at 400g of thrust so a little off 1:1.

I'm relatively happy with the kit - especially the edf unit. however a little disappointed with overall performance of the plane

Magnets in hatch need to be aligned a little better as there is a few mm gap as stated in a previous review.

Received my few weeks ago!
good mold, good painting and good balsa.
filled with 30A yep esc and 3s 1000mah 45C battery and obviously 4 x-31/d-47 ( yes, I have added rudder for better controll)

fly very very fast and flies on rails.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my few weeks ago!
good mold, good painting and good balsa.
filled with 30A yep esc and 3s 1000mah 45C battery and obviously 4 x-31/d-47 ( yes, I have added rudder for better controll)

fly very very fast and flies on rails.

purchased the ducted fan kit and all looks very nice. only gripe is magnets on fuselage and canopy not installed properly. when installing canopy it slides backwards and leaves a 3mm gap. really annoying. don't really want to hack them about.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

purchased the ducted fan kit and all looks very nice. only gripe is magnets on fuselage and canopy not installed properly. when installing canopy it slides backwards and leaves a 3mm gap. really annoying. don't really want to hack them about.

Top quality for sure, also a fun and challenging build. Realestate inside the fuse is sparse, especially with the full ducting system taking most of the space.Just taking the time and also using the recommended d47 servos is a must. I'm using a YEP 30,it fits nice and works well,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top quality for sure, also a fun and challenging build. Realestate inside the fuse is sparse, especially with the full ducting system taking most of the space.Just taking the time and also using the recommended d47 servos is a must. I'm using a YEP 30,it fits nice and works well,

This baby is amazing, Bret and HK did a fantastic job with this kit and the only thing l regret is the fact I ordered only one. ....the quality is perfect, the included fan unit has tremendous power and is well balanced and very smooth. If like me youre a huge bandit or electra fan youll fall in love with this bird. You wont regret your choice! Even the packaging is Excellent! and the manual reflects the top level of this kit , great!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This baby is amazing, Bret and HK did a fantastic job with this kit and the only thing l regret is the fact I ordered only one. ....the quality is perfect, the included fan unit has tremendous power and is well balanced and very smooth. If like me youre a huge bandit or electra fan youll fall in love with this bird. You wont regret your choice! Even the packaging is Excellent! and the manual reflects the top level of this kit , great!!!

Not very impressed with build quality of the fiberglass. Some holes don't line up and others are missing plywood backings. That made it a tricky build, definitely not for an inexperienced modeler. However, it flys nice with easy bungee launcher and landings are a bit trickier. Be careful when flying this fast plane, it disappears pretty fast.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not very impressed with build quality of the fiberglass. Some holes don't line up and others are missing plywood backings. That made it a tricky build, definitely not for an inexperienced modeler. However, it flys nice with easy bungee launcher and landings are a bit trickier. Be careful when flying this fast plane, it disappears pretty fast.

Just received the box. This thing looks nice! Quality of the fibreglass looks good, the covering om the wings and tail is very nicely applied. The included fan looks nice too. This is promising to be a very nice model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the box. This thing looks nice! Quality of the fibreglass looks good, the covering om the wings and tail is very nicely applied. The included fan looks nice too. This is promising to be a very nice model.

Initial impressions: Composite fuselage is very nicely finished and not too heavy. The eight blade fan is pretty stiff (probably reinforced) plastic inside an alloy shroud. Very nice - definitely NOT one of the cheapo plastic units often sold with small jets. The 8000KV motor sounds amazing when run on the bench, especially for one so small... The parts seem to fit well together, although ply elevator horn was in two parts - not sure if that is intentional or one off fault with the kit. Easy enough to glue together or fabricate. Conclusion pre-build: Very impressive and great value for money. Other guys in the club similarly impressed and threatened to buy, so may have to add some distinguishing markings..... Not a jet for the faint hearted or novice, but otherwise BUY IT. The UK weather is likely to remain cold and windy for some time, but will write up a short review after getting to fly it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Initial impressions: Composite fuselage is very nicely finished and not too heavy. The eight blade fan is pretty stiff (probably reinforced) plastic inside an alloy shroud. Very nice - definitely NOT one of the cheapo plastic units often sold with small jets. The 8000KV motor sounds amazing when run on the bench, especially for one so small... The parts seem to fit well together, although ply elevator horn was in two parts - not sure if that is intentional or one off fault with the kit. Easy enough to glue together or fabricate. Conclusion pre-build: Very impressive and great value for money. Other guys in the club similarly impressed and threatened to buy, so may have to add some distinguishing markings..... Not a jet for the faint hearted or novice, but otherwise BUY IT. The UK weather is likely to remain cold and windy for some time, but will write up a short review after getting to fly it.

Customer files
Electrolyte_Manual_V1.1 Download [6843]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save