New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione Pubblica ™ EZ Master Trainer EPO 1.230 millimetri w / Motore (ARF)

Dipartimento Funzione Pubblica ™ EZ Master Trainer EPO 1.230 millimetri w / Motore (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000042-0
WANT FREE SHIPPING? Click here to find out more!

Solo un altro alto allenatore ala? Noi non pensiamo. Il nuovo Dipartimento Funzione ™ EZ Maestro e Mini EZ Maestro sono formatori a prima vista, ma una volta che li volare vedrete che sono tutto; allenatore, aereo sport, Aerobat. Modellata in schiuma dura EPO, una brillante combinazione di colori grafica li fa guardare bene in aria, e durevoli quando hanno inevitabilmente toccare il suolo. Entrambi i master cellule di EZ master e Mini EZ dotate di telaio del triciclo con un ruotino anteriore sterzante, bullone su ala, e il controllo del canale piena 4, tra cui due servi degli alettoni per la grande risposta Roll! Aprire la scatola e si sono salutati con un basso numero di parti, e il montaggio minimo. Vai dal piano di lavoro al campo di volo in meno tempo di quello necessario per ricaricare le batterie!

Take-off sono breve e dolce grazie al potente motore brushless outrunner, con atterraggi una brezza a causa del carico alare luce di entrambi i modelli. Abbiamo avuto un esplosione in volo questi aerei durante tutti i nostri test e riprese video. Sono stabili quando si desidera rilassarsi, ma spingere l'acceleratore in avanti e sbattere i bastoncini negli angoli e si sveglia. volo rovescio richiede un po 'giù ascensore a causa del profilo alare fondo piatto, anche se l'angolo diedro mite rende rotoli come assiale come ci si aspetterebbe da un allenatore ad ala alta. Calcio in un piccolo timone in cima out salita dura e fare stallo croccante torna alla downline.

Sia il Maestro EZ e il suo fratello minore, il Mini EZ master sono disponibili in due versioni, Plug and Fly (PNF) e quasi pronto a volare w / Motore (ARF)

Caratteristiche:
• Quasi pronto a volare w / Motor- Basta installare la vostra scelta di elettronica e di controllo della velocità
• cellula stampata EPO
• sportello della batteria di facile accesso
• in alluminio robusto carrello di atterraggio e molla in acciaio principale ruota anteriore sterzante
• Motore outrunner brushless potente
• vibrante, facile da orientare pre-applicato EZ grafica master

Specifiche:
Apertura alare: 1.230 millimetri
Lunghezza: 980 millimetri
Peso di volo: 920-1000g (con batteria)
Motore: 2216 880KV Brushless Outrunner

Richiede:
Trasmettitore e ricevitore 4+ Canale
3S 11.1V 1800mAh batteria LiPoly
Controllo 30 Amp Brushless Speed
SF 10x7 Elica
4 x 8g Servi

  • SKU 9095000042-0
  • Brand HobbyKing
  • Capacità ( mAh ) -
  • Peso 2075.0000
  • Lunghezza 1020.00
  • Packaging Width 240.00
  • Altezza 255.00
  • HobbyKing™ EZ Master Trainer EPO 1230mm w/Motor
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

a very nice......piece of ch...... !
a real pain to install the front steering due to the drilling to clamp the wheel axle
and then i flew it about 20 seconds, made a flip, and the plastic stuff where you put the wing it went off due to lack of glue or bad glue i don't know, with the following result:

https://youtu.be/AoiX4hEVy4s

even my expensive upgrade emax 2215/20 motor is bent

gutted

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

a very nice......piece of ch...... !
a real pain to install the front steering due to the drilling to clamp the wheel axle
and then i flew it about 20 seconds, made a flip, and the plastic stuff where you put the wing it went off due to lack of glue or bad glue i don't know, with the following result:

https://youtu.be/AoiX4hEVy4s

even my expensive upgrade emax 2215/20 motor is bent

gutted

I've just started putting mine together and have found some point's of interest, the main wing spar is only 30cm long and 6mm wide, the recess in each wing is 30cm, so they put a ridge in the centre of the 30cm spar to stop it sliding into either wing to far and causing the wing to fold, I would recommend adding your own spar at 60cm long, the wings themselves look very tough at least 3cm thick till near the wing tip, ..............The front wheel holder is a brass insert into plastic which connects to the push rod, I recommend removing the brass insert and CA gluing it back in, (very fiddly) the plastic moulding around the brass insert securing screw is less than half a mm! at 2 points around the securing screw, mine came apart just tightening up the securing screw, easy fix,... Oh and the kit came with 2 propellers even though the description says they are required, In general this looks like a tough plane, the landing gear looks good, all over I reckon it's a good trainer/slow flyer, I will report back after I have flown it, looks like a good purchase to me!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've just started putting mine together and have found some point's of interest, the main wing spar is only 30cm long and 6mm wide, the recess in each wing is 30cm, so they put a ridge in the centre of the 30cm spar to stop it sliding into either wing to far and causing the wing to fold, I would recommend adding your own spar at 60cm long, the wings themselves look very tough at least 3cm thick till near the wing tip, ..............The front wheel holder is a brass insert into plastic which connects to the push rod, I recommend removing the brass insert and CA gluing it back in, (very fiddly) the plastic moulding around the brass insert securing screw is less than half a mm! at 2 points around the securing screw, mine came apart just tightening up the securing screw, easy fix,... Oh and the kit came with 2 propellers even though the description says they are required, In general this looks like a tough plane, the landing gear looks good, all over I reckon it's a good trainer/slow flyer, I will report back after I have flown it, looks like a good purchase to me!

Customer files
repowered mystery 2830 1500kv 8x4 prop Download [330]
How to brace your wing B4 flying OR ELSE Download [960]
what happens on unbraced wing! Download [429]
plastic pulled through foam not glued in Download [830]
New nose repair xtra screws for wing Download [2676]
EAZY MASTER FUSE WITH WING DOWELS Download [2143]
longer wing rod 600mm straight in place Download [1744]
CG push rods Download [605]
nose wheel leg horn Download [22]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save