Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dipartimento Funzione Pubblica ™ Guppy Mini Slope aliante di balsa 1.165 millimetri (KIT)

Generating Links

Dipartimento Funzione Pubblica ™ Guppy Mini Slope aliante di balsa 1.165 millimetri (KIT)

Prezzo:

Now save risparmia 0,00 € 0,00 €

41,02 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9419000005-0
Spedizione gratuita? Clicca qui per saperne di più!

Il Dipartimento Funzione ™ Guppy Mini Slope è un modello brillante perfetto per coloro che cercano di entrare in alianti pendenza! Lavorare con il designer europeo Mitja Erman, il Guppy è stato raffinato in un grande modello di pista disponibile ora come un kit di balsa tagliato a laser. Ha un cono di plastica naso rimovibile che consente di fare questo un modello a motore, se lo desidera.

Se non avete mai costruito un kit di balsa prima, il Guppy è abbastanza semplice che può essere affrontato da chiunque. contano le parti basse e costruire la semplicità non può essere battuto.

Per completare il modello, è necessario colla CA, un rotolo di materiale di rivestimento, carta vetrata, hobbyknife pochi altri strumenti assortiti, oltre a tutti i dispositivi elettronici. Con contano le parti basse, l'intera struttura del velivolo può essere costruito in una serata. Trascorrere un altro levigatura sera, un altro rivestimento, con un quarto di sera l'installazione di elettronica. Ciò significa che in meno di una settimana, si può avere un modello creato da soli, personalizzato il modo in cui ti piace.

Il kit Slope Dipartimento Funzione ™ Guppy Mini è un grande modello pendenza ascensore più leggero che può ancora gestire le venti forti con facilità. Come il modello può abbattere facilmente per adattarsi in una piccola scatola, è facile da trasportare in giro, o di tenere completamente assemblato per quando i venti sono di destra. Disponibile anche come una spina e volare, pre versione ad incasso.

Plug and fly versione disponibile qui

Caratteristiche:
• versione Kit - include tutte le parti tagliate al laser, teli, e hardware
• istruzioni illustrate Foto inclusi.
• Super divertente, leggero modello leggera salita
• Progettato per pendenza o può essere convertito in energia elettrica

Specifiche:
Apertura alare: 1.165 millimetri
Lunghezza: 710 millimetri
Ala Area: 13.4dm²
Airframe Peso: 180g


richiesto:
2+ trasmettitore e il ricevitore CH (micro ricevitore consigliato)
2 servi micro x 9g
4.8 ~ batteria del ricevitore 6V
UBEC / regolatore di tensione (se si usa la batteria 2S ricevente LiPoly)
materiale di copertura

  • Guppy Balsa Slope Glider
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Thomas | Acquirente verificato

  • Overall
  • Quality
  • Value

Nice little slope soarer

Nov 16, 2016

The Guppy is a nice and small slope soarer but you need to improve this little bird at some places. The push rod for the elevator needs to be fixed for not getting loose, the front wing attachment has to be reinforced and it's better using two separate servos for the ailerons.
I'm using 3 pieces of TGY-D56MG (SKU 9399000023-0) and it's same weight as using the 2 stock servos. Also perfect for direct use of a 2S lipo with about 600mAh. This plane is not for beginners!!! Cheers - Tom

coconutheed | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2016

The main downside with this kit is the lack of instructions and plans required to build the kit. The can get away with no plans but the instructions have to be very clear and can not miss out important details. The instructions you receive as part of the kit is a series of pictures which a way to small to see and when there is an important stage the instructional picture is split into 4 even smaller picture that you have no chance of focusing on.

I also received the kit with missing stock balsa for the underside of the glider. If I knew there wouldn't be any then I would not have bought this kit as it would be over priced. This again comes down to poor instructions as I don't have a checklist to check if all the parts are in the box.

You will enjoy the final product but be aware that it is a very small glider. More details on a motor conversion are needed in the kit as it does say it can accommodate a motor. I would also appreciate the layout of the electronics and how to install servos into the wing/fuselage.

I know that people say to expect this from Hobbyking but I have always received great products in the past. This is so close to a five star review, its just the poor instructions that have such a big impact.

maximilian | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 08, 2015

This is a great sloper with a couple of modifications. I read bad reviews about the built kit and it is understandable, when you build it you can do the right modifications. Where the wing attaches to the front of fuselage is to weak, one bad landing and it will break. The nuts for the trailing edge don"t stay glued, all i did was create an index for the wing and use the good ole 2 rods and rubber-band trick. The rear elevator control is tricky, i just bent the wire around the small horn and did my adjustments at the servo. I also attached a motor and folding prop because the weight needed to balance the plane is the same as a motor and ESC so why not!!! I guess what i am saying is you need some experience building. Flying the plane is a dream i love it, has a nice range from slow to fast. This plane has no rudder but you can modify that pretty easy, personally i think you don't need one on this model. Cant wait to fly it again!!

Greg | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2015

Overall a good kit. Fast and easy to build.
Biulding the kit:
1. A little skill is required to form the leading edge, wing tips and tail.
2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.
4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.
5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.

Flight:
1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.
2. Inverted flying is not very good due to the flat wing bottom.
3. Does not require very much lift in light conditions provided that you keep your speed up.
4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.

Overall, a fun and handy little plane

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 22, 2015

Overall a good kit. Fast and easy to build.

Biulding the kit:

1. A little skill is required to form the leading edge, wing tips and tail.

2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.

4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.

5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.



Flight:

1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.

2. Inverted flying is not very good due to the flat wing bottom.

3. Does not require very much lift in light conditions provided that you keep your speed up.

4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.



Overall, a fun and handy little plane

File dei clienti
guppy wing Download [43]
guppy Download [51]
guppy Download [51]
guppy tail Download [48]
reinforced guppy wing Download [35]
guppy wing tape joint Download [39]
wing reinforcing Download [9]
wing reinforcing 2 Download [248]
guppy Download [51]
carbon reinforcing Download [35]
  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori