Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

Dipartimento Funzione Pubblica ™ Guppy Mini Slope aliante di balsa 1.165 millimetri (PNF)

Dipartimento Funzione Pubblica ™ Guppy Mini Slope aliante di balsa 1.165 mill...

Now save risparmia 0,00 € 0,00 €

75,77 €
Non disponibile!
Stock:
OUT OF STOCK
Peso:
1255 g
SKU:
9419000004-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
acc
Descrizione
prodotto

Il Dipartimento Funzione ™ Guppy Mini Slope è un modello brillante perfetto per coloro che cercano di entrare in alianti pendenza senza il fastidio e la spesa di costruzione di un kit tradizionale! Di piccole dimensioni, ottima qualità costruttiva e un alto livello di pre-assemblaggio, il tutto ad un prezzo che non può essere battuto! Lavorare con il designer europeo Mitja Erman, il Guppy è stato raffinato in un grande modello pendio in una spina e volare versione per arrivare alla pendenza solo che molto più veloce.

Il due pezzi ala è costruito da balsa e coperto in film ultra-luce, come è la fusoliera, pugnalata orizzontale e verticale. Un cono di plastica può essere rimosso permettendo una facile conversione in energia elettrica.

Il Dipartimento Funzione ™ Guppy Mini Slope arriva con l'ala, fusoliera e della coda sezioni pre-assemblate, così come i servi, aste e corna di controllo tutti i pre-montati. Dopo aver aperto la scatola, vi sarà semplicemente necessario avvitare sulla fascia, la pugnalata orizzontale e installare il proprio ricevitore / batteria. Volare letteralmente minuti dopo l'apertura della scatola.

Caratteristiche:
• Plug and Fly - basta aggiungere ricevente, batteria e volare!
• Costruito in balsa e compensato struttura del velivolo con l'asta tubo di carbonio
• Pre-coperto in leggera pellicola di plastica multicolore
• Bullone insieme la costruzione, nessuna colla necessaria
• Servi, aste e corna di controllo pre-montato
• Design per pendenza o può essere convertita in energia elettrica

Specifiche:
Apertura alare: 1.165 millimetri
Lunghezza: 710 millimetri
Ala Area: 13.4dm²
Airframe Peso: 180g
Servo: 2 x 9g micro

richiesto:
2+ trasmettitore e il ricevitore CH (micro ricevitore consigliato)
4.8 ~ batteria del ricevitore 6V
UBEC / regolatore di tensione (se si usa la batteria 2S ricevente LiPoly)

Product
Specifications

Ulteriori informazioni

  • SKU:
    9419000004-0
  • Brand:
    HobbyKing
  • Peso (g)
    1255.00
  • Lunghezza
    740.00
  • Larghezza:
    110.00
  • Altezza:
    160.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
BEWARE These have an extremely dodgy elevator push rod setup. They have used 2 different gauge wires and joined them by the servo with heat shrink and they fail. The outer guide for the push rod is glued in during construction and cannot be replaced. Sounds a simple fix but believe me it is not Pity as apart from that they are nicely built.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So after reinforcing like everyone has said, reattach the tail to the boom with epoxy, solder the elevator push rod to z-bend, and add balsa back stop behind wing, the plane lasted all of 30 min. Throwing javelin style, landing in 2 inch grass, the sheeting on the right wing has failed, between the first and second wing rib. Thankfully I noticed it before my next throw, but now I am faced with uncovering and resheeting that section and praying there isn't anything else broken on this "pnp" model. Perhaps it is rtf, rebuild to fly?

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After waiting weeks it's finally in the UK warehouse, Got mine and it's a lovely glider but have to comment on the way the elevator control rod is connected to the servos, (2 pieces of wire joined by a piece of heat shrink tubing) are you joking or what HK, as soon as i powered up the elevator servo the joint came apart, in the air i would have more than likely lost what is a very good glider! But easy fix with electric guitar string (see my photos in files tab) apart from that it's a very well made little slope soarer. Also spent 10mins going over it with my iron as a few lose bits of film, 35gram added plus 2 300mah 2cells to get c of g right.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I wanted a small fast glider and this looked perfect. I paid full price which was quite expensive for a small simple model but it looked good and was exactly what I wanted. It was delivered well packed no problems and looked good. Before I even got it in the air, the elevator push rod close to the servo came apart. The 2 pieces of wire in the elevator push rod had been joined with heat shrink close to the servo. This is a very crappy way to may this critical joint. I fixed this by soldering the two pieces of wire together. Then the whole tail assembly came unstuck from the carbon fibre tail boom. I glued this back with epoxy. Both of these failures would have potentially destroyed the plane if it had been in the air. While doing the repairs, the nut that the wing bolt screws into fell off inside the fuse. I had to hack a hole in the side of the fuse to replace this. This is a great little plane manufactured to a shameful standard. I will never buy another ARF plane from HobbyKing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Haven't actually got to fly mine yet, but thought I would share what I have observed so far.
i) it's a lovely design & well made for the price.
ii) you only get 1 servo to control the ailerons, but a bit of research on rcgroups shows how to convert to 2.
iii) the designer recommends you tape the wings together to stop them getting ripped off in a crash & breaking the mounting points. I would go one step further & suggest you glue the 2 halves together & to the fuselage.
iv) the biggest issue I see is the ailerons are taped to the wing on the wrong side (imho) as it restricts the movement on the up side, but unrestricted going down - which is the opposite of what you want for clean rolls. So I am expecting poor handling because of this & there's no way to get the tape off without damaging the covering. The only other way to solve it would be to flip/swap the wings & remove/refit the control horns.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
wing fixing screws are odd size about 2.7mm diameter thankfully I have found two metal ones in my scrap box!
Nose cone is flimsy!
Needs 40-50gms to balance ( model is only 200 with receiver an battery)

Test glide fine, apart from nose cone!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived late god bless Parcelforce! looks fine but....
1. wing fixing screws strip when tightened
2. elevator pushrod is too long for correct adjustment
3. Aileron clevis poor quality
4. Attaching cockpit with 3 scraps of masking tape is a bit naff to say the least

It will also need lead to balance as a glider unless you fit a large battery!

With a little care could be a great product, please try harder.

Now I must try and find some wing screws.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice sailplane, all in all sturdy, but limited quality at best. Needs reworking. Crappy one servo-ailerons solution. Will rework it to to servos. The tail came loose on the first flight, absolutely have to check and reglue those. As a sailplane, it needs much ballast up front when working with a light battery.
Took me more than an hour to overcome the build defect on one aileron (not enough deflection due to wood not worked properly).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane need some work. But you get a great sloper for the bucks!!
1. Make sure the Tail is correct glue on the tail boom
2. Change the Single flaps servo to 2 micros servos. You can use now flaperons/brake and mybe Thermik mode.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
NOW I AM GOING THRU THE WHOLE THING. FOUND THE FRONT FORMER THAT HOLDS THE WING ON HAD NO GLUE. THE CANOPY DOES NOT FIT - NEEDS TRIMMING. NEEDS A VERY LIGHT BATTERY TO GET CG. THE NOSE CONE IS VERY FLIMSY PLUS MINE HAD NO GLUE AND WAS CRACKED RIGHT OUT OF THE BOX. THE SERVOS LOOK CHEAP. SORRY I BOUGHT THIS THING. NOT MY FIRST BAD EXPERIENCE WITH HOBBYKING SO I THINK I AM DONE WITH THEM.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Guppy Balsa Slope Glider

  • Guppy 3ch hobbyking

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.