Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

5kg ad alta velocità Dipartimento Funzione ™ Mi Digital Servo MG / 0.06sec / 52g

5kg ad alta velocità Dipartimento Funzione ™ Mi Digital Servo MG / 0.06sec / 52g

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
75 g
SKU:
HK47002DMG

Combine

essential items and
acc
Descrizione
prodotto

I servi HK Mi Series rappresentano la pausa successiva attraverso l'alta tecnologia servo precisione. Utilizzando induzione magnetica, piuttosto che un potenziometro, un livello insuperabile di precisione e prestazioni.

Specifiche:
Tensione: 4.8V / 6v
Velocità: 0.07 sec / 60deg (4.8V) - 0.06sec / 60deg (6V)
Coppia: 4.50kg.cm (4.8V) - 5.50kg.cm (6v)
Dimensioni: 40mm x 20mm x 39,2 millimetri
Peso: 52g
Treno di ingranaggi: Lega Full Titanio

Mi: induzione magnetica, utilizza un encoder rotativo magnetico al posto di un potenziometro tradizionale (inventato nel 1877). encoder rotativi magnetici hanno una vita più lunga e soffrono meno usura.

Product
Specifications

Ulteriori informazioni

  • SKU:
    HK47002DMG
  • Brand:
    HobbyKing
  • Peso (g)
    75.00
  • Lunghezza
    105.00
  • Larghezza:
    20.00
  • Altezza:
    90.00
  • Velocità ( Sec / 60deg )
    0.06
  • Coppia ( kg) ( min . 0.01kg )
    5.50
  • Unit Weight (g):
    52
  • A ( mm ):
    44.00
  • B ( mm )
    40.00
  • C ( mm )
    40.00
  • D ( mm ):
    20.00
  • E ( mm ):
    54.00
  • ( Mm ) F
    29.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very impressed with these servo. Precision and speed ist absolut great. Servohorns in standart and high torque from Blue Bird, Hitec and Futabe will fitt. GWS is to small.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
used them for my aileron, two on one long rudder. Wowe...what a speed and precisition. Geartrain is absolute high precition. Use them with a 2s LiFe and they are faster then my fingers........
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm running 8 of these on a 100cc Extra 330 through a 14 channel Futaba receiver and powered by 2x2100mah Turnigy Life batteries in parallel. 10 flights and no problems; these are the fastest servos I have ever used in 30 years of RC.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good, very fast servo for the price!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hey guys I have been running 2 of these servos now in 1/10 scale off road cars one in a short corse truck and one in a 4x4 buggy and I must say I am very impressed with the speed, accuracy and strength of these servos. They don't run hot at all the drain on the battery seems to be less than my previous servos (savox). I would recommend this servo to any one running 1/10 scale cars off road or on road. I would guess there is plenty of torque to run this in an 1/8 scale car as long as you DO NOT use 7.4V lipos unless you run them regulated. I have put probably 15-20 packs through my SC truck now and still going strong.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i have one this things use for my tail servo in hk600gt very noise servo. and get warm my ubec is TURNIGY 5-7.5A (8~42v) HV UBEC for Lipoly..i use 2s lipo when i use 6 volt setup very noise, :(
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servos work nice for HK600GT tail, fast and centering is very good. I like this better than my Align DS650 servo so far. Have only used for few weeks so can't comment on how well they hold up long term. You need to add large capacitor soldered to /- leads from BEC to receiver if your BEC is a switching type as most are. They will make lots of noise without it and could cause brown out, I used 3500uf 16volt from HK found in RX/TX accessories and have had no issues.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
5Kg y 0.06, es ideal para cola

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used this servo with UBEC 6V (6.2V) step down to 4.8V (my custom 2 diode step down). It not heat temperature = 41-43C in 5 min
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used HK47002DMG powered by the TR-UBEC15 using a 2S set 5V (with step down for rudder) Temperature is 43-46C
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.