Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Dipartimento Funzione Pubblica ™ Mi Digital High Torque Servo MG 11.8kg / 0.07sec / 58g

Generating Links

Dipartimento Funzione Pubblica ™ Mi Digital High Torque Servo MG 11.8kg / 0.07sec / 58g

Prezzo:

Now save risparmia 0,00 € 0,00 €

32,72 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
HK47011DMG
Spedizione gratuita? Clicca qui per saperne di più!
I servi HK Mi Series rappresentano la pausa successiva attraverso l'alta tecnologia servo precisione. Utilizzando induzione magnetica, piuttosto che un potenziometro, un livello insuperabile di precisione e prestazioni.

Un grande servo per 550 ~ 600 elicotteri di classe come il T-Rex 550 e HK600

Specifiche:
Tensione: 4.8V / 6v
Velocità: 0.08sec / 60 ° (4.8V) - 0.07sec / 60 ° (6v)
Coppia: 9.7kg.cm (4.8V) - 11.8kg.com (6v)
Dimensioni: 40mm x 20mm x 39,2 millimetri
Peso: 58g
Treno di ingranaggi: Lega Full Titanio
Motore: Coreless

Mi: induzione magnetica, utilizza un encoder rotativo magnetico al posto di un potenziometro tradizionale (inventato nel 1877). encoder rotativi magnetici hanno una vita più lunga e soffrono meno usura.
  • Servo Coppia ( kg) ( min . 0.01kg ) 11.80
  • Servo Velocità ( Sec / 60deg ) 0.07
  • Servo A ( mm ) 44.00
  • Servo B ( mm ) 41.00
  • Servo C ( mm ) 40.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm ) 55.00
  • Servo F ( MM ) 29.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

RCJunky.uk | Acquirente verificato

  • Overall
  • Quality
  • Value

Great price, Great product

Apr 15, 2019

Good strong servo. works well and get the job done.

LordPotato | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2016

Unfortunately this product did not last anywhere near long enough to be considered good value. The performance was incredible, however, it lasted only 2 days. I wouldn't recommend buying this unless it was utilised in a setup that will suffer no impact - the gears cannot take it.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 30, 2015

This Servo is verry fast for helicopter. I need the Servo for a HK600-GT.

Bruno | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 17, 2014

It's a very fast servo but very fast to die also !! Mounted on a 1/8 off road car...servo is dead after 1/4 of a run !!!
Very disapointed.

max17 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2014

Ho comprato questo servo per il mio buggy 1/8 e non ho avuto neanche il piacere di finire una scarica. Il servo sembrava veloce e preciso ma riscaldava anche da fermo. dopo una girata di neanche dieci minuti in pista si completamente fermato e scaldava cos tanto da non poter essere toccato con le mani. In buona sostanza soldi buttati.

Gerhard | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2014

Meine Meinung zu dem Servo.
Positiv:
sehr schnell und kraftvoll, sehr gute Auflsung mit kleinem Totpunkt, Titan Vollmetallgetriebe, Gehuse gut mit O-Ringen abgedichtet und im Servo keine losen Drhte. Also auch vibrationsfet.
Negativ:
Getriebespiel knnte etwas besser sein, Getriebeachsen der Zwischenrder sind nur in Kunststoff gelagert. Messingbuchsen wren besser.
Fazit:
Fr den Preis ein sehr gutes Servo

Darrin | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 15, 2014

I currently have 5 of these and 4 more coming and run them in all my offroad cars including my 1/8 ebuggy, which is more then enough servo for steering!!! I would buy more if they came in a low profile as well for my touring car!! Wink Wink Hobbyking..... :) Great product!!!

birdcage | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 12, 2014

Got mine now about 20 Lipo`s in my SC 10 4x4 as a steering servo and I`m very satisfied with it. Very fast, strong enough, good centering, temperature ok, but a bit to much play in the gears. It withstand a couple of hard crashes till now. Next time i will buy the slower one with a little more power, this one ist just to fast (even by driving it with 5,0 Volts).

Dan | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2014

Very disappointed with these. Bought three for my heli cyclic control, thought I would give them a try as up to now I have been impressed with HK products BUT if you intend to use these with Futaba or Align Aluminium Servo horns they only fit on about 50pcnt of the servos! I had two replacements sent but one of these was also wrong. There is clearly a serious quality issue. HK tell me they are only intended to be used with the supplied horns which are plastic, very flexible, and in my opinion will never withstand nearly 12kg of force. In my opinion avoid these unless using for basic low torque applications

faisal | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 22, 2014

i use it for my 1/8 off road car,, it was grate and i will order it again
i use it for my 1/8 off road car,, it was grate and i will order it again

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!