New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Dipartimento Funzione Pubblica ™ Mi Digital Servo HV / MG 61g / 8.40kg / 0.03

Dipartimento Funzione Pubblica ™ Mi Digital Servo HV / MG 61g / 8.40kg / 0.03

Discontinued Product

Please continue searching for a similar product.
Peso:
92 g
SKU:
HK47902TM-HV
WANT FREE SHIPPING? Click here to find out more!

I servi HK Mi Series rappresentano la pausa successiva attraverso l'alta tecnologia servo precisione. Utilizzando induzione magnetica, piuttosto che un potenziometro, un livello insuperabile di precisione e prestazioni.

Specifiche:
Tensione: 6.0V / 7.4V
Velocità: 0.04sec / 60deg (6.0V) - 0.03sec / 60deg (7.4V)
Coppia: 7.00kg.cm (6.0V) - 8.40kg.cm (7.4V)
Dimensioni: 40,1 millimetri x 20,5 millimetri x 39,4 millimetri
Peso: 61g
Treno di ingranaggi: Lega Full Titanio
Motore: Coreless

Mi: induzione magnetica, utilizza un encoder rotativo magnetico al posto di un potenziometro tradizionale (inventato nel 1877). encoder rotativi magnetici hanno una vita più lunga e soffrono meno usura.

  • SKU HK47902TM-HV
  • Brand HobbyKing
  • Peso (g) 92.00
  • Lunghezza 95.00
  • Larghezza 20.00
  • Altezza 90.00
  • Coppia ( kg) ( min . 0.01kg ) 8.40
  • Velocità ( Sec / 60deg ) 0.03
  • A ( mm ) 44.00
  • B ( mm ) 40.00
  • C ( mm ) 40.00
  • D ( mm ) 20.50
  • E ( mm ) 55.00
  • ( Mm ) F 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Wow, this servo is exremly fast, it is strong and running smooth after adding som more rease to the gear, wich is all metall and precisely manufactured. Centering is good and the speed seems to reach the specs given. Middle part of housing is metal, upper and lower side is plastic. The cables are secured by glue to the printboard. Well done this detail. All solder points are looking professional.

Now , after first test on the bench I will use it as tail servo with the GA-250 gyro. After testing in flight, Ill come back with additional information. And I hope it will last a time. Only thing is, the horns are going on very strong/hard, but better than beeing loose.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow, this servo is exremly fast, it is strong and running smooth after adding som more rease to the gear, wich is all metall and precisely manufactured. Centering is good and the speed seems to reach the specs given. Middle part of housing is metal, upper and lower side is plastic. The cables are secured by glue to the printboard. Well done this detail. All solder points are looking professional.

Now , after first test on the bench I will use it as tail servo with the GA-250 gyro. After testing in flight, Ill come back with additional information. And I hope it will last a time. Only thing is, the horns are going on very strong/hard, but better than beeing loose.

crazily fast! the steering on the car is really insanely quick, and for this price it's really super worth the money, especially compared to better known brands. running at 7.4v

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

crazily fast! the steering on the car is really insanely quick, and for this price it's really super worth the money, especially compared to better known brands. running at 7.4v

This Servo rocks!!!
Using this servo in my drift car and it is super fast, much faster than i can turn the wheel on the remote.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This Servo rocks!!!
Using this servo in my drift car and it is super fast, much faster than i can turn the wheel on the remote.

3 laps with my buggy with no impact and it started to crunch and failed, shame as it seemed amazing up until then. hopefully I'll get a refund

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

3 laps with my buggy with no impact and it started to crunch and failed, shame as it seemed amazing up until then. hopefully I'll get a refund

Hello everyone. I bought this servo as a test(I like to experiment with my racing gear). I race in the BRCA clubmans, and some other smaller clubs with a TC6.1WC, and this servo(shortened lead). The servo is immaculate, stupidly fast, and holds the position nicely. I've been used it for a full outdoor season in 13.5 boosted, and not a hiss from the servo, does it's job properly. If someone has an ESC with high voltage BEC(like CC MMpro or Tekin RS gen2) then they can see the ultimate performance from this servo, with crazy accuracy. I love it, and just about to buy the 2.nd for my other TC6.1. The only major drawback is it's weight(if you are hunting the grams that is). All in all, highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello everyone. I bought this servo as a test(I like to experiment with my racing gear). I race in the BRCA clubmans, and some other smaller clubs with a TC6.1WC, and this servo(shortened lead). The servo is immaculate, stupidly fast, and holds the position nicely. I've been used it for a full outdoor season in 13.5 boosted, and not a hiss from the servo, does it's job properly. If someone has an ESC with high voltage BEC(like CC MMpro or Tekin RS gen2) then they can see the ultimate performance from this servo, with crazy accuracy. I love it, and just about to buy the 2.nd for my other TC6.1. The only major drawback is it's weight(if you are hunting the grams that is). All in all, highly recommended.

I bought this servo for my Associated b4.2 competition buggy. The steering now is ridiculously fast and very accurate. The car feels great and ultra-responsive. I can even tune it to steer more slowly if I want on the emitter when needed. Very good servo!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this servo for my Associated b4.2 competition buggy. The steering now is ridiculously fast and very accurate. The car feels great and ultra-responsive. I can even tune it to steer more slowly if I want on the emitter when needed. Very good servo!!

Servo gear-train failed after three (3) uses despite no traumatic events. Closer inspection revealed poorly cut gears as the possible genesis of the malfunction.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Servo gear-train failed after three (3) uses despite no traumatic events. Closer inspection revealed poorly cut gears as the possible genesis of the malfunction.

First : Its a really good, fast Servo, but ..:

Be Aware !

Its on HV very fast and agressive, tends to overshoot if connected to a standard Gyro where you cant adjust acceleration and deceleration.



So on a GP780 Gyro in a Nitro Heli I needet to reduce Supply to 5V, while same Servo works perfekt on a Tarot FBL with 7V, where i could adjust Acc/Deceleration.

In Other Words : This fast agressive Servo with HV connected to a agressive gyro may be to much and lead to a very unstable Tail with high current consumption heating up the Servo.



I have 2 of them one older than 1 Yr and more than 50 Flights.

I would anytime buy again for E-Heli FBL, but not for Nitro-Flybar.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First : Its a really good, fast Servo, but ..:

Be Aware !

Its on HV very fast and agressive, tends to overshoot if connected to a standard Gyro where you cant adjust acceleration and deceleration.



So on a GP780 Gyro in a Nitro Heli I needet to reduce Supply to 5V, while same Servo works perfekt on a Tarot FBL with 7V, where i could adjust Acc/Deceleration.

In Other Words : This fast agressive Servo with HV connected to a agressive gyro may be to much and lead to a very unstable Tail with high current consumption heating up the Servo.



I have 2 of them one older than 1 Yr and more than 50 Flights.

I would anytime buy again for E-Heli FBL, but not for Nitro-Flybar.

Buy it in a lazy mood, i read the numbers 0.03 at 6.0V and torque 8.4kg and i say to myself "to good to be trouth".
I received it and mount it in my T4(XRay) and see where it is going.
It amazed me this speed is superfast and it dash follow the speed of your hands, this is quicker than my finger can turn the steering wheel.
This is value for money and being a happy customer, thank you Hobbyking for making a great product.
Ed IJzerman

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buy it in a lazy mood, i read the numbers 0.03 at 6.0V and torque 8.4kg and i say to myself "to good to be trouth".
I received it and mount it in my T4(XRay) and see where it is going.
It amazed me this speed is superfast and it dash follow the speed of your hands, this is quicker than my finger can turn the steering wheel.
This is value for money and being a happy customer, thank you Hobbyking for making a great product.
Ed IJzerman

5 stars for quality and price, very good! Also if I think it's 0,05s instead 0,03. But MAYBE :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

5 stars for quality and price, very good! Also if I think it's 0,05s instead 0,03. But MAYBE :)

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!