Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

HXT 9320MG-180 20.2g / 3.8kg / .15sec 180Degree

Generating Links

HXT 9320MG-180 20.2g / 3.8kg / .15sec 180Degree

Prezzo:

Now save risparmia 0,00 € 0,00 €

14,50 €
Spedito da:
  • Global
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9320MG-180-RTG
Spedizione gratuita? Clicca qui per saperne di più!

180 gradi Servo.

Il nuovo servi HXT solo bisogno di una piccola tensione (4.8V) per raggiungere elevati carichi di coppia!

No. dell'articolo: SSV-9320MG-180
Peso: 20.2grams / 0,72 once
Dimensioni: 26 x 13 x 26 mm / 1,15 x 0,50 x 1,05 pollici
Coppia: A 4.8V: 3.8kg / cm, 52 oz / a
Velocità: A 4.8V: 0.15sec / 60 ° a vuoto
Esecuzione di corrente: 360mA
Stallo attuale: 920mA
Horn Spline: 25 Segmenti
Lunghezza del legare del connettore 160mm (6.29in)
Connettore Horsing: Connettore Futaba
Cuscinetto a sfere: un cuscinetto a sfera sulla parte superiore
Tipi di attrezzi: Metal Gear

Questo servo è la stessa spec come 9320MG, tuttavia è ruota 180 gradi.
NON È UN SERVO PROPORZIONALE. SARA ruotare di 180 gradi SOLO. Da utilizzare solo per applicazioni su / OFF IN CUI È RICHIESTA corsa completa.

  • Servo Coppia ( kg) ( min . 0.01kg ) 3.40
  • Servo Velocità ( Sec / 60deg ) 0.15
  • Servo A ( mm ) 32.00
  • Servo B ( mm ) 30.00
  • Servo C ( mm ) 27.00
  • Servo D ( mm ) 13.00
  • Servo E ( mm ) 39.00
  • Servo F ( MM ) 17.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Lucas | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2011

We purchased in total 6 of these servos. They only travel between two positions, as already mentioned in the comments here. Unfortunately, they are not travelling exactly 180. Some of them travel 190 200 230 and 265. You're lucky to get one that travels exactly 180 )

chucky1978 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 07, 2011

2/2 work perfect.

21,5cm lenght of Cable with Connector

14,5 gr. w/o Servohorns.

Fabiomel | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 01, 2010

Very good, is it small and very strong. I make de video about this retract servo. Please, watch de video at the videos tab.

Fabiomel | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 03, 2010

um servo retrtil sem posies intermedirias, ele vai direto de um extremo ao outro.

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 07, 2010

same... ITS A RETRACT SERVO! but theres normal servo on picture- the servo I have received is SSV-9320MG+RTG, simply 9320MG is usual servo, but all has to be explained just by "180". At real, throw is 185degree as to manual.

after testing one of 2 servos has about only 130degree throw.

Fernando Costa | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 23, 2009

These servos are quite strong but the quality control is a little poor. I've bought two servos and one of them doesn't make 180 and it's noisier than the other, so it's only a question of luck.

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 03, 2009

Leicht und stark. Die angegebenen 180 Grad Drehwinkel werden allerdings nicht ganz erreicht, nur etwa 170 Grad.

allenl ln | Acquirente verificato

  • Overall
  • Quality
  • Value

this servo is for retract gear

Nov 25, 2008

I saw people confuse this servo application, this servo is for retract gear use, as I instead in my 46 class F3A, that is much lighter, good recommend.

Ken Taylor | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 05, 2008

Why do you guys keep posting that this servo won't center? IT IS A RETRACT SERVO! It does not work for anything other than retractable landing gear or for on/off applications, there is no in-between. It is not going to center, its going to go from one full end of travel to the other. I have 3 and they work just fine, they pull the landing gear up & down on my plane!

alenl ln | Acquirente verificato

  • Overall
  • Quality
  • Value

wow, Micro Retract gear servo!

Oct 06, 2008

this is my first time bought such as micro retract gear servo for my park leading, lighter and torque is enought for my airplane, good idea, especially price is much much cheaper than Futaba and other big brand......

  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!