New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

HXT lega composita Firewall Monte (85/36 millimetri)

HXT lega composita Firewall Monte (85/36 millimetri)

Shipped From:
  • USA
  • Global

Now save risparmia 0,00 € 0,00 €

4,58 €
Alert me
Stato:
Non disponibile!
Peso:
69 g
SKU:
SC-FWM-2530
WANT FREE SHIPPING? Click here to find out more!
In lega leggera di peso composito rende questo monte molto leggero e molto forte.
Con il Monte distanze dei fori di 15 e 16mm, questo supporto può assumere una vasta gamma di motori.
Il supporto è regolabile in lunghezza e può essere tagliato a misura.

Peso: 32g
Lunghezza: 85mm ~ 36 millimetri (regolabile)
* Questo supporto è una misura perfetta per Turnigy 35-XX della serie (tra cui SK) outrunners brushless.


  • SKU SC-FWM-2530
  • Brand HXT
  • Peso (g) 69.00
  • Lunghezza 75.00
  • Larghezza 38.00
  • Altezza 50.00
  • Kv ( rpm / v ) -
  • Correnti Max (A) -
  • Resistenza ( mh ) -
  • Max Tensione (V ) -
  • Potenza ( W ) -
  • Albero A ( mm ) -
  • Lunghezza B ( mm ) -
  • Diametro C ( mm ) -
  • Can Lunghezza D ( mm ) -
  • Lunghezza totale E ( mm ) -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Brought this mount with a 3532 SK3 motor as description said its ideal for 35-xx motors including SK3 but this is not the case. New holes will have to be drilled in the Mount to accommodate motor. Apart from that looks and feels strong.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brought this mount with a 3532 SK3 motor as description said its ideal for 35-xx motors including SK3 but this is not the case. New holes will have to be drilled in the Mount to accommodate motor. Apart from that looks and feels strong.

Well made and now come with Nylocs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well made and now come with Nylocs.

Excellent product and very good value. Mounted my Turnigy 35/42 motor but 35mm is the maxim can width this will accommodate. If you do this be careful to check the clearance of the rear screw heads holding the centre part to the sides. They just clear the motor casing by 1mm each side. I had to re-drill the motor mounting holes. Easy to do using the bracket supplied with the motor as a guide. Be careful to allow a slide fit for the screws. They should tighten into the motor with finger tip pressure. If the do not open up the bracket screw holes with a needle file. Do not force the screws into the motor, you'll strip the thread !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent product and very good value. Mounted my Turnigy 35/42 motor but 35mm is the maxim can width this will accommodate. If you do this be careful to check the clearance of the rear screw heads holding the centre part to the sides. They just clear the motor casing by 1mm each side. I had to re-drill the motor mounting holes. Easy to do using the bracket supplied with the motor as a guide. Be careful to allow a slide fit for the screws. They should tighten into the motor with finger tip pressure. If the do not open up the bracket screw holes with a needle file. Do not force the screws into the motor, you'll strip the thread !

really useful , it adapts to any need , only advice after a couple of flights , tighten all the screws , the vibrations tend to loosen them

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

really useful , it adapts to any need , only advice after a couple of flights , tighten all the screws , the vibrations tend to loosen them

Great mount, very versatile. Thought it might be liable to vibration resonance being metal but not so. Seems to actually dampen vibrations.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great mount, very versatile. Thought it might be liable to vibration resonance being metal but not so. Seems to actually dampen vibrations.

A very useful bench mount, light, precise and hi adaptable characteristics. Very recommended. I'm using it in an electrical EPO Cessna 100cm long and reorder another for the Cessna 182 laser cut 960cm model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very useful bench mount, light, precise and hi adaptable characteristics. Very recommended. I'm using it in an electrical EPO Cessna 100cm long and reorder another for the Cessna 182 laser cut 960cm model.

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering

Great quality. Works great and is easy to setup. Hardware is top quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great quality. Works great and is easy to setup. Hardware is top quality.

I use this one in a Marguerita RC from Hobbyking - NTM 3548 1100kv. Only possible to use 2 screws to keep the motor in place. Pay attention: you should use horizontal holes. If you use vertical holes, the motor mount firewall could bend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this one in a Marguerita RC from Hobbyking - NTM 3548 1100kv. Only possible to use 2 screws to keep the motor in place. Pay attention: you should use horizontal holes. If you use vertical holes, the motor mount firewall could bend.

I put one of these in my Hobbyking Marguerita, with a NTM prop drive 35-48. It's not possible to put 4 screws, only 2. You have to pay attention, and use the horizontal holes to screw your motor. First time, I used vertical holes, and the front of firewall bent, motor became loose, lots of vibration.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put one of these in my Hobbyking Marguerita, with a NTM prop drive 35-48. It's not possible to put 4 screws, only 2. You have to pay attention, and use the horizontal holes to screw your motor. First time, I used vertical holes, and the front of firewall bent, motor became loose, lots of vibration.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags