Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Jiyi P2 Multirotor autopilota Flight Control System (V2)

Generating Links

Jiyi P2 Multirotor autopilota Flight Control System (V2)

Prezzo:

Now save risparmia 0,00 € 0,00 €

133,61 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
605000002-0
Spedizione gratuita? Clicca qui per saperne di più!

Alla ricerca di un sistema di pilota automatico economico con tutte le funzionalità di un sistema professionale grande marchio? Il sistema pilota Jiyi P2 Auto sarà sicuramente misura la fattura!

Il sistema pilota P2 Auto è dotato di caratteristiche e modalità di volo che trasformeranno la vostra Multirotor e vi fornirà una esperienza di volo professionale con tutte le caratteristiche di sicurezza e le condizioni di volo dei sistemi leader di mercato.

Il sistema P2 è adatto per multirotors con un diametro massimo di 800mm e si adatta molte delle configurazioni Multirotor comunemente utilizzati, tra cui, X Type quad e hexcopter.

Il sistema offre una stabilità superiore e punto preciso in bilico che lo rende perfetto per la vostra fotografia aerea e videografia. Con diverse modalità di volo del sistema P2 copre una moltitudine di volare stili dal principiante al nascente fotografo aerea e volantino lo sport avanzate.

Il sistema P2 offre connettività USB ed è compatibile con Windows XP, SP3 e Windows 7, che vi permetterà di configurare e mettere a punto il vostro Multirotor. La versione V2 ha rivisto firmware per migliorare le prestazioni complessive.

Caratteristiche:
• Supporta PPM, PWM e SBUS ricevitori
• Fornisce stabilità superiore e precisa in bilico posto
• Supporta tipo Multirotor aeromobile con diametro del rotore fino a 800mm
• Progettato per X-type e hexcopter
• Supporta PWM ESC sotto 490 Hz
• sistemi radio Suits PCM o 2.4Ghz
• Compatibile con Windows XP, SP3, Windows 7
• modalità di volo: GPS, modalità senza testa, la modalità direzione intelligente, librazione e tornare a casa.
• Protezione di bassa tensione
• Connettività USB Micro

Specifiche:
Tensione di funzionamento: controllore principale 4.8V ~ 5.5V
LED Module / Power: 7.4V Input ~ 6V (raccomandare 2S ~ 6S LiPo) Uscita 2A @ 5V
Consumo: <2W
Temperatura di funzionamento: 0 ° C - 60 ° C
Temperatura di stoccaggio: -40C + 60c
Tolleranza in bilico: livello orizzontale ± 2m, livello verticale ± 0,8 m
Massimo angolo di inclinazione: 30 °
Velocità massima verticale: 6 m / s

Peso Componente:
Controller principale: 32g
Bussola GPS Module /: 32g
LED Module / Power: 20g
Controller principale: 48 × 38 × 17 millimetri
Bussola GPS Module /: 54 × 15 millimetri
LED Module / Power: 30 × 28 × 10 millimetri

Il pacchetto contiene:
controller principale
Modulo Bussola GPS
Modulo di potenza LED
cavi di ponticello
Infissi e arredi
Cavo USB

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Agostino | Acquirente verificato

  • Overall
  • Quality
  • Value

Deluso

Nov 18, 2019

mi dispiace ma io con questo articolo non sono riuscito a programmare nonostante tutti gli sforzi e quindi è per me inutilizzabile, ho buttato moneta al vento

robert | Acquirente verificato

  • Overall
  • Quality
  • Value

Turned out good in the end !

Jul 19, 2019

After some months in the box because i couldnt get it working/ arming (see below), i tried again with a race star 4 in 1 esc. I updated the firmware and hey presto it works. It wont arm in GPS mode unless it has locked on to enough satelites but will arm in stable mode anytime. Perhaps JIYI have been tinkering with the firmware, for the better i might add !

Klaus | Acquirente verificato

  • Overall
  • Quality
  • Value

Sehr gute Steuerung Jiyi P2

Oct 08, 2018

Bin sehr zufrieden mit der Steuerung. Macht genau das,was Sie soll.
Auch ohne GPS-Mode sehr stabil. Für den Preis unschlagbar.

robert | Acquirente verificato

  • Overall
  • Quality
  • Value

Difficult

Apr 01, 2018

I spent hours and hours on this FC and I have finally given up. Life is just too short !. I fitted Afro's first. I could get these to arm but there was a dead zone between 10-20% on the throttle. No amount of different firmware or calibrations would get rid of it. Then I tried Hobbyking blue series ESC's. Known to have worked for other people. No matter what I did, I couldn't get these to arm. Then I tried a qbrain. These would work on anything wouldn't they ? They armed but I couldn't get the throttle range to work consistently. So I changed the Radio and receiver and tried all the above combinations again. Finally back to the afros and SBUS on the receiver, mildly better on the throttle dead zone. So I thought I would at least try a test flight. When I did attempt a flight the led went out and stayed out as soon as the ESC's were armed, then returned when disarmed. I have been a UK CAA qualified UAV pilot for 3 years, and building configuring multicopters for many more years before that..... and my senses tell me that unless all looks and feels correct, don't fly. So I didn't !. In conclusion I would say that this is a firmware problem (which I did update). I believe the basic hardware is of good quality but there is a definite problem with the firmware in so much as there are huge incompatibility issues. Nice try JIYI, but by the look of the reduced support for the P2, its about to be discontinued.

morville | Acquirente verificato

  • Overall
  • Quality
  • Value

nice flight controller

Nov 04, 2017

I am happy with this F.C. works well on my v700 quad gps hold is solid and all modes work well it is a nice and easy F.C. to setup and the software is easy to use the manual is well written and easy to understand and I got it on sale for 70$ which was a great deal for this well made F.C. Buy it worth every penny

laroche | Acquirente verificato

  • Overall
  • Quality
  • Value

Good FC (hard to combine with ESC's, most of them wont work)

Oct 07, 2017

An excellent flight controller when you know what to combine with. Not compatible with many esc's. Works very smoothly with the HobbyKing BlueSeries brushless speed controller. I bought a lot of these FC's, and had a problem with 2-3 of them (mostly with the channel 3). When everything is done properly, it is very stable and safe to fly. I have tested RTH compared to Naza, and is even more precise.

andreas13 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2016

dont waste your money , I bought 3 and try 1 , its cant be arm , and ch6 are unfuncion, I will try 2 last , I hope it can work normaly , I am disapointed , about QC from Hobbyking , its bad .....

andreas13 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2016

dont waste your money , I bought 3 and try 1 , its cant be arm , and ch6 are unfuncion, I will try 2 last , I hope it can work normaly , I am disapointed , about QC from Hobbyking , its bad .

Wong | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2016

Bought 4 units and 2x have problem, Jiyi got QC issue. HK want me to sent back to warehouse will cost me more then 50pcnt of the unit cost since i bought it at offer prices. So i choose to bin it. that bad luck for me and no more taking risk with Jiyi.....

kuson | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2016

Great flight controller, especially for simple stabilize mode and hovers / gps. Can do sport mode (I understand it might be acro). Great aluminum box. Software not as good as DJI and can be refined abit more, but for the price is great and performance great do compare with Jiyi P2 Pro, that one offers better hover and can connect to GCS (Android). Like my P2 Pro review, you may have to manually callibrate the ESCs as there is no step in the software to do this, but is just basic plug the ESC servo leads directly to the Receiver and calibrate using throttle stick.

  1. 1
  2. 2
File dei clienti
P2(en)ManualV1.11.pdf Download [1061]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!