JST-XH parallela Balance piombo 4S 250 millimetri (6xJST-XH)
These are a MUST HAVE! I use them for charging but only for 1 pack because I like to cut the leads off and use them for other things like my Telemetry. I cut one of the connectors off and added a JST so I could plug my telemetry right into the balance plug. Just make sure if your cutting some off to properly cover the cut wires if your ever going to use it to charge again. I like to cut a stagger pattern so the cut wires do not line up even anymore then shrink warp the exposed ends.Great for charging multiple packs in parallel together with homemade XT60 wiring harness. It extends the wires from the charger as well.I use this on my 300 W Reaktor for my six 2200 lipos. Make sure you buy the charging harness too, since this is just the balancing harness.
Bien, es la nica manera de obtener los conectores para la telemetria frSkyAdquirir este produto pelo motivo de que a hobbyking no tem este conector para a venda separadamente, e como estava precisando optei por cortar os conectores e utiliza-los em meu objetivo,,,Buying this product on the ground that the HobbyKing not have this connector to the sale separately, and how he needed I chose to cut the connectors and use them in my goal,,,very usefull wire inside a plane, good connectic , and cheap,A very usefull tool when you need to save time, and choose to charge up to 6 batteries connected parallel. However, if your ballancer only has 300mAh ballancing current, then the ballancing of the cells often takes longer than the actual charging. Make sure you use batteries, whose cells do not drift much, otherwise you end up waiting too long.
Also, adjust the maximal charging voltage to 4,190V max to prevent fire through overcharging!!!! The ballancer only measures the average voltage of all cells.
Other than that, a great piece of kit.JST-XH Parallel Balance Lead 4S 250mm (6xJST-XH)Easy to use and is fairly good stuff in parallel, and can do charging