JUMPER 2.4G Modalità alta attesa e indipendentemente 5.8G trasmissione video del sistema versione RTF

Looking for your first 250 size FPV racing drone, but bemused by the range of options available?

If you are, then the CX-91 Jumper might just be the answer you're looking for.

Designed as an integrated package, the CX-91 has a performance that brings a smile to the face of even the most demanding racer at a price that is sure to bring one to the face of everyone else too!

With everything that you need to begin FPV racing in the box apart from 4 x AA batteries for the transmitter (not forgetting plenty of practice) this drone can be in the air in as little time as it takes to charge the included 1600mAh 3 cell LiPoly flight battery.

The main structure of the CX-91 is made from glass reinforced plastic to give you a versatile frame that will take the inevitable tumbles in its stride without adding excessive weight. This, combined with the 1806 brushless motors, LED lighting system and unique 3 blade propellers, with unique locking mechanism, gives the CX-91 a sparkling performance that matches its looks.

Of course, this wouldn't be an FPV racer without some kind of video equipment on board, and here again, the CX-91 exceeds expectations: a 720 x 1280 NTSC HD video camera paired with a 32 channel 5.8GHz video transmitter complete with SD card port for recording your flights and a circular polarized antenna for crisp video reception under race conditions.
The stylish CX-91 transmitter is fitted with a high-definition 4.3" TFT LCD screen, complete with On Screen Display (OSD) to give you real-time information on your battery state.

The CX-91 gives you a near-perfect introduction to FPV racing without the hassle of having to source individual components at the same time as matching the performance of many high-end FPV drones.

Features:
• Highly agile FPV racer
• Mode 2 (left hand throttle) custom transmitter
• Optional flight modes
• Tough carbon fiber structure
• Up to 300m range
• 720 x 1280 HD camera
• 5.8G 32CH video transmitter with automatic frequency search
• Full color TFT LCD monitor with built-in OSD

CX-91 specs:
Type: RTF FPV racing drone
Frequency: 5.8G
Battery: 11.1V 1600mAh LiPoly battery (Included)
Motors: 1806 Brushless
ESC: 4 in 1 18A brushless ESC
Rotor dia: 120mm
Working temperature: -10°C to +40°C
Flying time: 10~12mins
Range: <300m
Dimensions: 240 x 250 x 80mm
Weight: 420g(w/battery)

VTX specs:
Frequency: 5.8GHz
Channels: 32 CH
Camera: 720 x 1280
Video format: NTSC

VRX specs:
Monitor screen: 4.3" color
Type: TFT LCD
Resolution: 480 x 272 pixels
Aspect ratio: 16:9
Brightness: 500 cd/m2
Input: A/V
Power consumption: 500mW
Built-in battery: 2200mAh
Working time: <2hrs
Dimensions: 123 x 80 x 15mm

For details of frequencies, please refer to the manual under the files tab below.

Included:
1 x Cheerson CX-91 Jumper FPV Quadcopter
1 x 11.1V 1600mAh 35C 3S battery
1 x 5.8G antenna
1 x Cheerson CX-91 5.8G Transmitter
1 x 4.3 inch 5.8G 32CH Monitor w/visor
1 x Monitor holder
1 x Mushroom antenna
8 x Black propeller
1 x Balance charger
1 x Screw driver
1 x Wrench
1 x Memory card set
1 x Data transmission cable
1 x Manual

Required:
4 x AA batteries (for transmitter)