Jumper 218 Pro Quad Copter (ARF)

• Overall
• Quality
• Value

revision to an other review (good quad)

Dec 14, 2017

my first impressions are good. solid frame, well laid out. I was trying to flash the flight controller and cleanflight was saying it was a non cleanflight version firmware on the board.
Well 2 days reading and i found someone saying unplug everything from the controller, and i did. now i can flash the board and all is good with this quad.
i forgot to save the original setting from the controller so setup may take a little longer but overall im very pleased with my purchase.
UNPLUG everything from the controller if you are having flashing issues.

• Overall
• Quality
• Value

No parts

Nov 30, 2016

This is a great litle Quad , but ...
BUT BUT..Hobby king no longer stock the lower arms for it so no spare parts available ; :(

• Overall
• Quality
• Value

Customer Rated

Jun 09, 2016

like this little machine...runs ok. But I was - again - sick and tired with manual provided. Hobbyking really needs to get into business of INFORMING/GUIDING new quad customers decently in manuals. I have written this before with other products from hobbyking, but still we buy stuff that we by ourselves have to figure out. And with "Little technical" knowledge we really needs help...via small video etc. that explain all basic concerning installing etc., right from start with connecting what colour wire where and so on. It cannot be true that every time I buy something from HK I have to juggle around the internet for hours to find solutions for my new investments...

• Overall
• Quality
• Value

Customer Rated

May 20, 2016

Pros:
-robust and sturdy frame
-nicely made, good materials used
-very stable flight after some tuning
-flight time 8 min with 1500 mAh (no 3D, smooth flight)
Minor issues:
-screws were getting loose and doped in flight. One must glue or fasten them.
-reconfiguration with computer requires jumpers switching each time (otherwise OSD stays off)
-motor power cables soldering was weak, they detached after hard landing
-there is no room for FPV transmitter inside frame. Installed below fuselage exposes it to damage
-lack of spare parts (I may be wrong, but I could not find them so far)

• Overall
• Quality
• Value

Customer Rated

May 15, 2016

Ok after lots of curisng and cussing heres my review. The FC isnt naze32 its a knock off which in turn is a knock off of Naza BUT it works the same its easy to configure. I had some issues i couldnt get power to my reciever or video this caused so much hassle and hair pulling eventually i stripped it all down and found the problem the 5v pin for video and reciever were bent over and squashed on the naze board ports. The other issue is it wont ARM unless i assign a switch which then causes me problems changing modes. So im currently flying in ACRO mode all time i will sort it eventually but its no biggy. Also locktite everything you can even the prop hubs ive lost two already and 2 of the screws came out during flight.

• Overall
• Quality
• Value

Customer Rated

Apr 25, 2016

This quad flies like a dream , so easy to fly The board is great with the built in osd .
Some concerns about the way its designed , too much integration for my taste and the esc should be in th arms not hogging all the real estate on the main body .. there is no where to place a receiver neatly in the frame .

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 22, 2016

the manual is usless and dosent explain enough about the switches , and the supplied vtx lasted 3 mins before it died ..the whole quad smacks of proprietry style build and is too intergrated for my liking ..the only real plus is the control board with the built in osd , and the ability to change pids in the osd menu .

• Overall
• Quality
• Value

Customer Rated

Apr 21, 2016

Nettes Gert. Die Schrauben sollten alle mit Loctite gesichert werden. Bei der Gelegenheit kann man gleich die zwei Platinen der Arme mit Epoxy verkleben. Dadurch wird alles viel stabiler. Im FC muss man oneshot=on und looptime=2500 einstellen, sonst vibriert es. Der Video-Sender wird extrem hei. Das geht nicht lange gut. Entweder 4 Siliziumdioden oder einen Spannungsregler fr 7V davor (nach TE383 suchen) (Stromaufnahme ist ca. 300mA). Kamera ist nicht toll. Aber fr den ersten Versuch ausreichend. Flugleistung ist berzeugend.

• Overall
• Quality
• Value

Customer Rated

Apr 13, 2016

Although this is supposed to be a ready-to-fly product the quality control completely screwed that up.
None of bolts were fixed with locktite, which meant a motor got lose and tore off from the solder point the first minute of flight. Even though the motors and frame have 4 mounting holes, only 2 were used per motor. Pretty much all the bolts in the front half were lost as well.

I would not recommend this to a beginner and a pro would not bother of course, the performance of this quad is below standard and replacing arms, etc requires complete disassemble.

The integrated voltage regulator on the power distribution board is low-quality and the PCB traces are to thin to handle the current. So it got fried almost instantly.

So now I'm stuck having to order the replacement parts from the international store since the EU does not stock those.

• Overall
• Quality
• Value

Customer Rated

Apr 06, 2016

I have bought this , Nice manual ,Good product! I disconnnected the LEDS they make flighttimes shorter, i used my 3D printer to make a plate to lift the battery above my reciever. Now i can fit my gopro. It is 570g With gopro 4 , 3s 1500mah 40c battery. I get around 6 min flighttime. If somone is interested in the CAD file of the upgrade part, please feel free to contact me.