Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global
  • USA

KD 63-34S Brushless Outrunner 206Kv

KD 63-34S Brushless Outrunner 206Kv

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
460 g
SKU:
KDA63-34S
Descrizione
prodotto

KA63-34S
Constant: 206Kv
Batteria: 10Cell Lipo
Corrente di funzionamento: 9-32A
Corrente di picco: 43A
Suggerita Prop Dimensioni: 19x12

Dimensione stelo: 8,0 millimetri x 24 millimetri
Dimensioni del motore: 63 millimetri x 56mm
Peso: 460g

Product
Specifications

Ulteriori informazioni

  • SKU:
    KDA63-34S
  • Brand:
    N/A
  • Peso (g)
    460.00
  • Lunghezza
    0.00
  • Larghezza:
    0.00
  • Altezza:
    0.00
  • Kv ( rpm / v )
    206.00
  • Correnti Max (A)
    43.00
  • Potenza ( W ):
    0.00
  • Lunghezza B ( mm ):
    56.00
  • Can Lunghezza D ( mm )
    24.00
  • Max Tensione (V )
    37.00
  • Albero A ( mm ):
    8.00
  • Unit Weight (g):
    460
  • Diametro C ( mm )
    63.00
  • Lunghezza totale E ( mm )
    80.00
  • Resistenza ( mh ):
    0.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Motor mounted in a Hanger 9 Fokker D-VII. Turning a 17x12E APC with 8S, 4000mha pack. Motor pulls 870w at 5300rpm and flys the plane very well. Not too fast and has scale performance. Other test values with different props:

16x12E 800w 5500rpm

15x13E 660w 5700rpm

17x10 750w 5600rpm

18x10 880w 5400rpm



I suspect that the suggested 19x12 prop will pull close to 1200w with 8S, not so sure I'd use 10S with that prop.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor for my 26pcnt Peak MXS-R. With 2x5s3000 Zippies and a 20x10 JXF it pulls about 52A. Almost 2kW!. It runs a bit warn/hot, must add some baffles for better cooling. Only issues so far are:
1. A bit sloppy bearings, replaced with ceramic Abec7.
2. Stator came loose, strange noise after landing. Re-glued with 24h epoxy. Works fine now. Might be due to overtemp....

This is one is equvilent to AXI5320/34. Would whish for a bit more powerfull motor, but the a63-20L and 24L is are bit too heavy. A "a63-24M" (i.e. an AXI 5325/24 clone) would have been perfect.
Please HK, offer something inbetween S and L.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this for my Hangar 9 Sopwith Camel which needs the noseweight. On 8S it spins an 18" propeller fast enough to fly the Camel comfortably. The motor is cool after landing but I don't remember how much current it drew. I get almost 40 minutes duration with a 8S 5000 mAh battery.



My motor has surface rust on the shaft but that doesn't matter. It's fantastic value for the money.



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
tres bon en 12s avec une 19x15 35 A
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great motor but I have a couple of small complaints. Firstly, it is heavier than the specified 460g. It weighs 535g on its own, and 680g with all of its accessories. Secondly, I had to file a couple of grooves out of the flange mounted prop adaptor to clear the grub screws. Otherwise, once I got it running it was a great performer!



On 6S LiPo cells, with a 20x13 electric prop, it pulled 3,570g using 810W of power.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.