Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • USA

KD36-50-07S 5000kv Brushless Inrunner (9T)

KD36-50-07S 5000kv Brushless Inrunner (9T)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
267 g
SKU:
KD36-50-07S

Combine

essential items and
acc
Descrizione
prodotto

I inrunner KD36 sono equivilent ai motori di dimensioni 540.

Dimensioni: 36 ~ 50 millimetri
Monte anteriore fori sono di 25 millimetri.
dimensione del pozzo: 5mm
Peso: 220g

Spec.
Kv: 5000rpm / V (9T)
Idle corrente: 6.1A
Resistenza: 0,0045
Max Amp: 97A

Product
Specifications

Ulteriori informazioni

  • SKU:
    KD36-50-07S
  • Brand:
    N/A
  • Peso (g)
    267.00
  • Lunghezza
    0.00
  • Larghezza:
    0.00
  • Altezza:
    0.00
  • Kv ( rpm / v )
    5000.00
  • Correnti Max (A)
    97.00
  • Potenza ( W ):
    0.00
  • Lunghezza B ( mm ):
    51.00
  • Can Lunghezza D ( mm )
    49.00
  • Max Tensione (V )
    0.00
  • Albero A ( mm ):
    5.00
  • Unit Weight (g):
    220
  • Diametro C ( mm )
    36.00
  • Lunghezza totale E ( mm )
    68.00
  • Resistenza ( mh ):
    0.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Have installed this in a Traxxas Slash together with HK 100a ESC. Have tried the combo with 2s and 3s, but have not tried it with 4s yet.

At first testrun I was not able to do full speed with 3s, because it reached to high speed and startet to fly. Have to adhust the car, with a wing in front to keep the front wheels on the ground. Shoul be possible to reach speed 120km/h +++
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor. For the price you will be hard pressed to find a better one.

Only concern at this time is the temp the motor runs at. I have a limited selection of 5mm pinions so I have ordered some new 48 pitch pinions and will try regearing to remove some heat from the motor.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good quality motor. For the price you are going to be hard pressed to find a better one.

Only concern is the motors tends to run a little on the hot side. This maybe due to my limited pinion options at this time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
here is a test http://www.youtube.com/watch?v=am8b1tFbkQA
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm looking to put this on a fast flying wing, maybe two of them. What props are ideal for fast flying? 6x5.5? 7x7?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super moteur mont dans un Buggy 4x2,plein de puissance et de couple
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Extremely powerful motor! I used this in my Rustler with 3s lipo and I think it's even better than the castle 5700kv motor! Just be careful with the motor wires because the plastic around them shatters really quick...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tengo montado este motor en un Traxxas Slash, junto con un variador de 60A, relacion 18/86. Haciendolo trabajar con Lipos 3S tiene una aceleracion brutal y una velocidad punta expectacular. Hay que ir muy cuidadoso con el gatillo, pero me cepillo a los nitrosos, jejeje.



Totalmente recomendable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Same issue as CiberDog except I noticed it upon initial inspection (so no burned up ESC for me). Wire insulation is so brittle that it falls off if the wires are bended at the base of the motor. The exposed wires end up touching the endbell. I won't dare to connect this to any ESC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the motor itself so powerful and work great with deepvee



verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.