Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Modulo Kingduino APM esterno a LED

Generating Links

Modulo Kingduino APM esterno a LED

Prezzo:

Now save risparmia 0,00 € 0,00 €

3,88 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
387000062-0
Spedizione gratuita? Clicca qui per saperne di più!

modulo LED di stato esterno, abiti Arducopter 2.5 ~ 2.6.

Caratteristiche:
• Visualizzare lo stato APM
• 2 indipendenti rosso / blu del LED
• si inserisce direttamente nella porta di APM A6 ~ A7

Dimensioni:
Lunghezza: 40,5 millimetri
Larghezza: 11 ~ 18 millimetri
Profondità: 4,7 millimetri
Lunghezza di cavi: 250mm

* Nota: Questo non è un prodotto di marca originale Arduino.

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

The Fiamma | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2016

Very small module.
You can connect this to the A6 and A7 of your APM 2.x and will provide you a very bright led indicators.
If you are running Arducopter 3.1.5 or before, you have to activate the led output in mission planner. On 3.2.x or later its's already activated by default.

Diane | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 06, 2015

Very bright leds and easy to install on APM. I only wish it had some kind of case to mount it in or shipped with some clear heat shrink to help protect it from moisture

cenzic^^ | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2015

Just pluged into my APM 2.6 with no problem. A6 and A7 pins but had to change the LED_MODE parameter to 3 using mission Planner. It works like a charm! Very useful.

Timothy | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 27, 2015

Ordered this for mt HKPilot Mega and works like a charm! 2 Leds (Blue and Red) for Arm and GPS indication. Chip board is well made and has 2 holes for mounting. The 3 wired servo connector connects to A6 for GPS Lock indication (Blue) and the single connector connects to A7 for Arm/DisArm indication. Once plugged in, they flash similar to the small LEDS on the board but now externally and pretty bright even being powered by from the FC! Wires connect directly. In case anyone is wondering, yes the red wire in the 3 wire connector needs to be plugged into the FC, This powers the LED board (shown by a tiny blue LED indicating power in). The Main Blue/Red LEDS will start flasing once connected! Recommended for a small and great add on to the Pilot Mega board!

L2smith2 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 04, 2015

plug n play apm analog output 4 and 6. mimmics the red a blue APM board led's for armed and GPS lock. Put a KK piezo buzzer on channel 5 for audible alerts

File dei clienti
No File Name Download [56]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!