New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Kingduino tastiera LCD Shield

Kingduino tastiera LCD Shield

Discontinued Product

Please continue searching for a similar product.
Peso:
66 g
SKU:
009000008
WANT FREE SHIPPING? Click here to find out more!

Questa tastiera LCD Shield (pin maschio) per Arduino è composto da un display LCD blu 16x2 e 6 pulsanti momentanei, da sinistra a destra, selezionare, sinistra, su, giù, destra e RESET. Lo scudo può essere collegato direttamente su una scheda Arduino Duemilanove, rendendo la saldatura o volare cablaggio per il collegamento inutili. Perni 5, 6, 7, 8 e 9 sono utilizzati come interfaccia per il display.

Caratteristiche:
• Facile da leggere 16x2 schermo LCD blu
• Contrasto regolabile
• Design laminato e facile da ampliare
• L'utilizzo dell'interfaccia LCD4Bit modificata

Interfaccia LCD4Bit modifica:
Al fine di preservare la porta SPI per uso futuro, i perni digitale IO DB7-10 e PIN11 & pin 12 usati nella biblioteca LCD4Bit originale sono stati spostati DB4-7 e, rispettivamente, il pin 8 e 9 pin.

tastiera:
La tastiera è costituita da 5 pulsanti - SELECT, Sinistra, Su, in basso ea destra, più un pulsante di reset. Per salvare la risorsa pin digitale IO, l'interfaccia della tastiera utilizza un solo canale ADC. Il valore della chiave viene letto attraverso un 5 fase di tensione divisore di resistenza. Quando si preme un tasto, l'ADC legge il valore di tensione attraverso il partitore di tensione; allora il valore di tensione viene confrontata con la soglia di valore di tensione memorizzato in un array per identificare quale tasto è stato premuto.

Specifiche:
Tensione di funzionamento: 5VDC
Dimensioni: 80 x 58 x 22 millimetri
Peso: 52g

* Nota: Questo non è un prodotto di marca originale Arduino.

  • SKU 009000008
  • Brand -
  • Capacità ( mAh ) -
  • Peso (g) 66.00
  • Lunghezza 90.00
  • Larghezza 14.00
  • Altezza 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The pin out for this dispay shield is as folows (display-arduino): D4-4, D5-5, D6-6, D7-7, RS-8, E-9.

Buttons have a nice click to them and are all (except reset) readable from pin A0 (schematic for how they are conected would be nice HK)

When pluged in to an arduino it interferes a bit with the power jack but not a whole lot, the board itself sticks about 1cm over the left edge of arduino.

I've tested this with arduino due which is 3,3V, the display works prfectly, the same cant be said for the buttons as they are powerd from 5V, some hardware hackong will be required.

Other than that it feels like a decent quality product, the soldering is ok, I'd like to see more solder in a couple of places, but over all good for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The pin out for this dispay shield is as folows (display-arduino): D4-4, D5-5, D6-6, D7-7, RS-8, E-9.

Buttons have a nice click to them and are all (except reset) readable from pin A0 (schematic for how they are conected would be nice HK)

When pluged in to an arduino it interferes a bit with the power jack but not a whole lot, the board itself sticks about 1cm over the left edge of arduino.

I've tested this with arduino due which is 3,3V, the display works prfectly, the same cant be said for the buttons as they are powerd from 5V, some hardware hackong will be required.

Other than that it feels like a decent quality product, the soldering is ok, I'd like to see more solder in a couple of places, but over all good for the price.

Excelente producto con buena calidad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente producto con buena calidad

The Arduino LCD screen is a backlit LCD screen with headers. You can draw text, images, and shapes to the screen with the LCD library. There is an onboard micro-SD card slot on the back of the screen that can, among other things, store bitmap images for the screen to display.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Arduino LCD screen is a backlit LCD screen with headers. You can draw text, images, and shapes to the screen with the LCD library. There is an onboard micro-SD card slot on the back of the screen that can, among other things, store bitmap images for the screen to display.

Works well, is very easy to use... just plug in shield, and you're good to go! Hobbykings documentation could have been a bit better though.

Use LiquidCrystal lcd(8, 9, 4,5, 6, 7); in order to control the LCD, IO pin 10 to control the backlight (recommend you use pinMode(10,INPUT) to turn on, and pinMode(10,OUTPUT) to turn it off).

Only uses one analog pin (A0) for the five control buttons - you just need to work out the different voltages that you'll read when you press each button - which will vary slightly depending if powering Arduino from external power or USB. 6th button is linked to reset line.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works well, is very easy to use... just plug in shield, and you're good to go! Hobbykings documentation could have been a bit better though.

Use LiquidCrystal lcd(8, 9, 4,5, 6, 7); in order to control the LCD, IO pin 10 to control the backlight (recommend you use pinMode(10,INPUT) to turn on, and pinMode(10,OUTPUT) to turn it off).

Only uses one analog pin (A0) for the five control buttons - you just need to work out the different voltages that you'll read when you press each button - which will vary slightly depending if powering Arduino from external power or USB. 6th button is linked to reset line.

This is a cool little shield. Good price. I personally haven't found much use for it, but it was cool when I first got it up and running. I did a more in depth review at the address below.

aeronauticsroboticsandhotglue * blogspot * com/

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a cool little shield. Good price. I personally haven't found much use for it, but it was cool when I first got it up and running. I did a more in depth review at the address below.

aeronauticsroboticsandhotglue * blogspot * com/

Very good component, the example software is downloadable in the files section. Very easy to use good contrast very cheap if compared with performances

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good component, the example software is downloadable in the files section. Very easy to use good contrast very cheap if compared with performances

For the money you can't buy this and make it yourself. I'd put this on your must have list.

OlliW BLHeliBox over on Helifreaks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the money you can't buy this and make it yourself. I'd put this on your must have list.

OlliW BLHeliBox over on Helifreaks

Very good product , compatible with arduino LCD library

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good product , compatible with arduino LCD library

Mine works as advertised. If you do a google search on 'LCD keypad shield', the top returns are the pages for this device from therobotshop_dot_com. There are schematics and excellent code examples.

I have a couple of possible uses for mine - hopefully I can port the code from the 3DRobotics ground station. I also tested it with a 4 x 20 display that I have and it works too.

Very nice device at an extremely good price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine works as advertised. If you do a google search on 'LCD keypad shield', the top returns are the pages for this device from therobotshop_dot_com. There are schematics and excellent code examples.

I have a couple of possible uses for mine - hopefully I can port the code from the 3DRobotics ground station. I also tested it with a 4 x 20 display that I have and it works too.

Very nice device at an extremely good price.

nice LCD pad shield, like other users have brought out, if you think it is broken, it aint, just change the contrast

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice LCD pad shield, like other users have brought out, if you think it is broken, it aint, just change the contrast

  1. 1
  2. 2
Customer files
dimmer_for_backlight_by_pushing_select_b Download [1]
LiquidCrystal_Adjust_Contrast Download [0]
LCD and button usage sample code Download [1]
LCD and button usage sample code Download [1]
LCD and button test code Download [11]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!