New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Kingduino Nano V3.0 microcontroller Consiglio

Kingduino Nano V3.0 microcontroller Consiglio

Shipped From:
  • USA
Discontinued Product

Please continue searching for a similar product.
SKU:
009000007
WANT FREE SHIPPING? Click here to find out more!

La Arduino Nano è un piccolo, completa, e tagliere-friendly bordo basato sul ATmega328. Ha più o meno la stessa funzionalità del Arduino Duemilanove, ma in un pacchetto differente. Manca solo una presa di corrente continua, e funziona con un cavo USB mini-B al posto di uno standard.

Il Nano 3.0 ha una serie di caratteristiche comunicare con un computer, un altro Arduino o altri microcontrollori. Il ATmega328 fornisce comunicazione seriale UART TTL (5V), disponibile sul pin digitali 0 (RX) e 1 (TX). Un FTDI FT232RL sui canali bordo di questa comunicazione seriale via USB ei driver FTDI (incluso con il software di Arduino) forniscono una porta COM virtuale per il software sul computer. Il software Arduino include un monitor di serie che consente ai dati testuali semplici da inviare da e per la scheda Arduino. I LED RX e TX sulla scheda lampeggia quando i dati vengono trasmessi tramite il chip FTDI e connessione USB al computer (ma non per la comunicazione seriale sui pin 0 e 1).


* Nota: Questo non è un prodotto di marca originale Arduino, è realizzato con gli stessi componenti e le funzionalità di un altro produttore.


Specifiche:
Microcontroller: ATmega328
Tensione di funzionamento (livello logico): 5V
Tensione in ingresso (consigliato): 7-12V
Tensione di ingresso (limiti): 6-20V
Digital I / O Pins: 14 (di cui 6 forniscono PWM)
Pin di ingresso analogici: 8
Corrente di CC per I / O Pin: 40mA
Memoria Flash: 32KB (ATmega328) di cui 2 KB utilizzati dal bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1KB (ATmega328)
Frequenza di clock: 16 MHz
Dimensioni: 43 x 18 x 19mm
Peso: 6g

  • SKU 009000007
  • Brand -
  • Capacità ( mAh ) -
  • Peso 17.0000
  • Lunghezza 118.00
  • Larghezza 15.00
  • Altezza 65.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Seems to have counterfeit FTDI chips. Bought two, began receiving this error after an update:

stk500_getsync(): not in sync: resp=0x00

After a lot of research, I found that downgrading the driver works, and that it is due to a counterfeit FTDI chip on the board. now I see there is a Windows 8 upgrade that may make this impossible.

If it weren't for this, I'd have rated them 5 stars all across the board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Seems to have counterfeit FTDI chips. Bought two, began receiving this error after an update:

stk500_getsync(): not in sync: resp=0x00

After a lot of research, I found that downgrading the driver works, and that it is due to a counterfeit FTDI chip on the board. now I see there is a Windows 8 upgrade that may make this impossible.

If it weren't for this, I'd have rated them 5 stars all across the board.

Bought just one to trial as I've been a PIC assembler programmer for decades and wanted to check out the Arduino and its IDE. Had some problems, to cut a long story short the Nano A0 pin had a dry joint and would intermittently disconnect from the A0 header-pin and instead it would pick up the voltage from the adjacent A1 pin. Used it successfully by leaving A0 disconnected and using other pins instead. Not a brilliant first impression of Arduinos.
Cheers
Phil

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought just one to trial as I've been a PIC assembler programmer for decades and wanted to check out the Arduino and its IDE. Had some problems, to cut a long story short the Nano A0 pin had a dry joint and would intermittently disconnect from the A0 header-pin and instead it would pick up the voltage from the adjacent A1 pin. Used it successfully by leaving A0 disconnected and using other pins instead. Not a brilliant first impression of Arduinos.
Cheers
Phil

I bought one to evaluate. On arrival I found it has an intermittent connection from A0 to the header pin, when it happens to be disconnected it picks up the voltage on A1 instead.
Otherwise functions ok, no problems connecting to Windows 8, but don't think I'll buy any more from here. Phil_G.
www.singlechannel.co.uk

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought one to evaluate. On arrival I found it has an intermittent connection from A0 to the header pin, when it happens to be disconnected it picks up the voltage on A1 instead.
Otherwise functions ok, no problems connecting to Windows 8, but don't think I'll buy any more from here. Phil_G.
www.singlechannel.co.uk

perfeito para pequenos projetos...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfeito para pequenos projetos...

Okay - but to expensive. You will get cheaper ones at the www - roundabout 1,30 $ less........

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay - but to expensive. You will get cheaper ones at the www - roundabout 1,30 $ less........

I feel sorry to buy this item as I spent one full day to try to upload sample sketch but I failed to at least communicate with it. I advise you not to buy it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I feel sorry to buy this item as I spent one full day to try to upload sample sketch but I failed to at least communicate with it. I advise you not to buy it.

works very well, I like the small size and the reset button, the price is just right, I have Arduino uno R3 units, but they are a bit big to put on a RC craft, so I use the UNO to write my program and work out the bugs, then send the finished program to the little nano, connect my wires and off we go! if the pins are in the way, I unsolder them and use 90 deg pins so I can mount the nano flat, try to keep it away from the RX, the clock on the nano may cause noise problems for the RX.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works very well, I like the small size and the reset button, the price is just right, I have Arduino uno R3 units, but they are a bit big to put on a RC craft, so I use the UNO to write my program and work out the bugs, then send the finished program to the little nano, connect my wires and off we go! if the pins are in the way, I unsolder them and use 90 deg pins so I can mount the nano flat, try to keep it away from the RX, the clock on the nano may cause noise problems for the RX.

The nano. Arduino for the s,all hearted

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The nano. Arduino for the s,all hearted

First of all, I am not a huge Arduino fan because I think most boards in the family are overpriced for the performance. The one plus about the Arduino family is the good software library support. Having said that, the main reason I got my 4 Arduino Nanos is because the HK price finally makes it a great value, especially since I can get them from the US warehouse. The quality of these clones is great. Only caveat is that you may have to try re-connecting to USB several times before computer recognizes it, but I believe that's true of genuine Nanos too. I'll have to find a shorter cable and see if that improves things. Once it does connect, you can use the Arduino dev IDE w/o problems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First of all, I am not a huge Arduino fan because I think most boards in the family are overpriced for the performance. The one plus about the Arduino family is the good software library support. Having said that, the main reason I got my 4 Arduino Nanos is because the HK price finally makes it a great value, especially since I can get them from the US warehouse. The quality of these clones is great. Only caveat is that you may have to try re-connecting to USB several times before computer recognizes it, but I believe that's true of genuine Nanos too. I'll have to find a shorter cable and see if that improves things. Once it does connect, you can use the Arduino dev IDE w/o problems.

I do not know if it was working before but it is always a good idea to burn the boot loader to Arduino if there are any problems. I am not sure if just a USB connection will burn it because I used an usbasp programming stick instead.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I do not know if it was working before but it is always a good idea to burn the boot loader to Arduino if there are any problems. I am not sure if just a USB connection will burn it because I used an usbasp programming stick instead.

  1. 1
  2. 2
  3. 3
Customer files
579544975X83077X8.pdf Download [854]
ArduinoNanoManual Download [854]
arduino nano 328 layout Download [153]
Xbee Arduino Receiver Sketch Download [7]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save