New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Kingduino ONU R3 microcontrollore compatibile - Atmel ATmega328

Kingduino ONU R3 microcontrollore compatibile - Atmel ATmega328

Shipped From:
  • Global
QTY:

Now save risparmia 0,10 € 0,10 €

Special Price 10,29 € 10,29 €

You save risparmia 0,10 € 0,10 €

Was  10,39 €

Stato:
Disponibile
SKU:
381000030
WANT FREE SHIPPING? Click here to find out more!

L'Arduino Uno è una scheda basata sul microcontrollore ATmega328. Dispone di 14 pin digitali di ingresso / uscita (di cui 6 possono essere utilizzate come uscite PWM), 6 ingressi analogici, un oscillatore a cristallo a 16 MHz, una connessione USB, un jack di alimentazione, un header ICSP e un pulsante di reset. Esso contiene tutto il necessario per sostenere il microcontrollore; è sufficiente collegarlo ad un computer con un cavo USB o alimentarla con un adattatore AC o la batteria-a-DC per iniziare.

L'Uno si differenzia da tutte le schede precedenti, nel senso che non usa il chip driver USB-seriale FTDI. Invece, è dotato il ATmega16U2 (Atmega8U2 fino alla versione R2) programmato come un convertitore USB-seriale.

Revisione 2 del consiglio Uno ha una resistenza tirando la linea di 8U2 HWB a terra, rendendo più facile da mettere in modalità DFU.

Revisione 3 del consiglio di amministrazione ha le seguenti nuove funzionalità:
1.0 piedinatura: SDA aggiunto e pin SCL che sono vicino al pin AREF e altri due nuovi perni posti vicino al pin RESET, il IOREF che permettono gli scudi di adattarsi alla tensione fornita dalla scheda. In futuro, gli scudi saranno compatibili sia con le schede che utilizzano l'AVR, (che opera @ 5V) e con l'Arduino causa che operano @ 3.3V. Il secondo è un perno non collegato, che è riservato per scopi futuri.


* Nota:
Questo non è un prodotto di marca originale Arduino, è realizzato con gli stessi componenti e le funzionalità di un altro produttore.


Specifiche:
Microcontroller: ATmega328
Tensione di funzionamento: 5V
Tensione in ingresso (consigliato): 7-12V
Tensione di ingresso (limiti): 6-20V
Digital I / O Pins: 14 (di cui 6 forniscono PWM)
Pin di ingresso analogici: 6
Corrente di CC per I / O Pin: 40 mA
Corrente DC per 3.3V Pin: 50 mA
Memoria flash: 32 KB (ATmega328) di cui 0,5 KB utilizzati dal bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Frequenza di clock: 16 MHz

include:
scheda 1 x Arduino Uno R3 microcontrollore
1 x cavo USB

  • SKU 381000030
  • Brand -
  • Capacità ( mAh ) -
  • Peso 75.0000
  • Lunghezza 150.00
  • Larghezza 25.00
  • Altezza 110.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

Excelente calidad en la fabricacion lo recomiendo ampliamente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente calidad en la fabricacion lo recomiendo ampliamente

not the orginal Arduino but bootloader is preinstalled and all works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not the orginal Arduino but bootloader is preinstalled and all works fine.

Arduino... novos desafios, vamos l!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arduino... novos desafios, vamos l!

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

Customer files
921137919X677897X37.jpg Download [16]
921137919X677897X43.png Download [2]
921137919X677897X59.png Download [11]
sensorshield Download [184]
arduandjoy Download [189]
sensorsheld Download [56]
sensorshieldpinouts Download [153]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save