Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

KINGKONG 260 FPV corsa Drone Plug & Play (verde)

Generating Links

KINGKONG 260 FPV corsa Drone Plug & Play (verde)

Prezzo:

Now save risparmia 0,00 € 0,00 €

143,89 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
426000029-0
Spedizione gratuita? Clicca qui per saperne di più!

Il team KINGKONG hanno fatto di nuovo. Usando il loro popolare telaio 260 FPV hanno aggiunto un grande pacchetto di attrezzi per fare un ottimo Plug and Play pacchetto completo con la macchina fotografica e video FPV TX.

Questo Multirotor è alimentato dal KINGKONG Forza 200 Multirotor guida set attrezzature. Il kit ha tutto il necessario da un controllore di volo sintonizzati mini CC3D pre al fino al Spironet antenna.

I motori sono KINGKONG 2204-2300KV (CW e CCW) alimentato da KINGKONG 12A OPTO BLHeli ESC di. Con un UBEC (5v 3A) il potere di PPB. 6040 eliche saranno accelerare il ritmo.

Vi è una fotocamera preinstallato FPV e video, TX quindi basta sintonizzarsi sul canale e ottenere volare. La fotocamera FPV è inclinato in modo da vedere dove si sta andando, quando la gara è in funzione.

Proprio al fine di garantire che i concorrenti sanno dove siete c'è striscia di LED luminoso eccellente nella parte posteriore come questa sarà l'unica parte vedranno.

Questo imballaggio eccitante non solo è la parte, ma vi darà ore di divertimento corsa al giusto prezzo.

Caratteristiche:
• in fibra di vetro unibody completamente modellato telaio rinforzato
• Kingkong 2204-2300KV Motors (CW e CCW)
• KINGKONG 12A 2-4S OPTO BLHeli ESC di
• KINGKONG 5V-3A UBEC
• Potenza e video quadro di distribuzione con XT60
• Mini CC3D regolatore di volo
• 5040 Eliche (CW e CCW)
• FPV telecamera CMOS 1000TVL
• 200mW 5.8GHz Audio / Video Transmitter
• 5.8GHz circolare polarizzata Spironet Antenna
• fotocamera Azione monte
• Modulo Super LED luminoso (Assicurarsi che la concorrenza sa che sei tu più prendendo loro!)

Specifiche Telaio:
Passo: 260 millimetri
Peso: 138g (telaio nudo)
Materiale: Nylon + Fiber

Specifiche motore:
KV (RPM / V): 2300KV
Tensione: 7.4-14.8V (2-4S LiPoly)
Spinta max: 440g
Numero di poli: 12N / 14P
Elica: 5 "-6"
Pozzo del puntello: 5mm
ALBERO MOTORE: 3mm
Diametro: 28mm
Lunghezza: 31,2 millimetri
Peso: 26g
Spaziatura di fori: 16 mm o 19 millimetri M3

ESC Specifiche:
Tensione in ingresso: 7.4-14.8V (2-4S LiPoly)
Constant: 12 Amp
Burst: 20 Amps (5 sec max.)
BEC: No BEC, solo OPTO
Dimensioni: 50x16x6mm
Peso: 7.5g (con fili)

UBEC Spec:
Tensione in ingresso: 6V ~ 28V / DC (2-4S LiPoly)
Tensione di uscita: 5V
Ripple: Costante: 3 Amps
Dimensioni: 53x17x7mm
Peso: 12g

Specifiche della macchina fotografica:
Formato: PAL
TVL: 1000
Sensore: CMOS
Tensione in ingresso: 5 ~ 12V DC
Angolo di vista: 120deg

Video TX Specifiche:
Modulate: Wideband FM Modulate
Formato video: NTSC / PAL
Impedenza di uscita: 50 Ohm
Potenza di uscita: 23 ~ 24dBm
Canale: 32CH
Tensione di funzionamento: 7V ~ 24V
Corrente di alimentazione: 190mA
Temperatura di funzionamento: -10 ~ 85
Video Larghezza di banda: 0 ~ 8.0 MHz
Frequenza portante audio: 6.5MHz
Video Livello di ingresso: 0,8 ~ 1,2 Vp-p
Impedenza di ingresso video: 75 Ohm
Audio Livello di ingresso: 0.5 ~ 2.0 Vp-p
Audio impedenza di ingresso: 10K Ohm
Connettore: RP-SMA
Dimensioni: 40 x 23 x 8mm
Peso: 10g (senza antenna)

canali:
Banda A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Banda B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Banda E: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Banda F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880

include:
1 x 260 KINGKONG
20 x 6040 Pro (10CW + 10CCW)
1 x Antenna Spironet
1 x adattatore di comunicazione software per PC CES
1 x camma di azione inumidito montare
pack 1 x Cavo
cravatta pack 1 x Cavo
set 1 x Antenna monte
1 x Cavo USB

richiesto:
5-6 Canale RX / TX
1300-2200mah 11.1V; 1000-1800mah 14.8V

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Greg | Acquirente verificato

  • Overall
  • Quality
  • Value

Great bang for your buck

Oct 26, 2017

I got this Quad after I lost my KK Hex version when being stupid. I find this quad is nimble enough and good for learning on. Pretty quick too. I had heavy batteries so I could get long flight time and will soon try some lighter 4S batts and I'm expecting good things in terms of a speed increase. I love the librepilot/CC3D FC, and overall it is well balanced.
The frame however is brittle, and the main let down of this product. I slow bump will snap an arm so get your superglue and epoxy ready. I've got to the point of using fibreglass repairs over the superglued break point. Also the feet fall off, a design fail indeed. I had to make my own landing pads.
But for the price, it's a great start quad and certainly a bucket load of fun. Just try not to crash it too hard.

PlanetFPV | Acquirente verificato

  • Overall
  • Quality
  • Value

Great package for those testing the sport

Jul 28, 2017

Very easy set up that took a total of 45 mins including flashing the cc3d through librepilot. The set up as is handles like a bus so I would recommend changing it for racing. My value rating is based on the summer sale price and at the current price I would give this a 4 star.

Russ | Acquirente verificato

  • Overall
  • Quality
  • Value

Great quad for intro into FPV racing!!!

May 30, 2017

Bought this to get used to flying the faster FPV type quads. It performed great right out of the box. Did have to go online to get some direction on how to program and get current firmware. Overall this is a great little 260 quad!!!! Very happy!

jambon | Acquirente verificato

  • Overall
  • Quality
  • Value

It's ok, but a few design mistakes

Nov 02, 2016

It's a very nice quad in overall, maybe for beginners ?
But, the landing thing/feet keep falling apart, and inevitably you loose them.
Once you lost enough foots, then you land on the ESC, because some sort of genius thought it was a good to install the ESC under the frame.
The ESC do not like to be used as landing pads, so they break.
Broken ESC burn motors (literally).
Replacing ESC on this frame is super annoying cause you have to unsolder ALL OF THEM
I'm not super happy about this.

Maxwell | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 26, 2016

Great little quad for a beginner multirotor pilot. This was my first quadcopter and it defenitely facilitated a great introduction to multirotor flight as well as some great fun once I became more confident.

My only major criticism is the frame. It's quite brittle and once an arm is gone it is a pain to re-attach. I will shortly be migrating this hardware to a new body.

rudedog | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 08, 2016

i bought 2 of these and i cant get enough of it it flies great

eldiablo155 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 25, 2016

She came just few days ago, cc3d controller is really easy to setup , I checked if the ESCs were all linked as they should and I went for a fly ... I like the feeling she gives, I like the sound of her engine ... I like the green lime LEDs on the back , she can be really faster , all I need now is learn how became good for her , using the right power while turning ... it'll take his time , but since she made me confident with the whole space around me , I'll be keen to do it. I'm feeling in love

Proff | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 10, 2016

Awesome kit for racing.

lampo.ep | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 08, 2016

precio y calidad deseable

Joel | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 18, 2016

upon receiving this item everything was looking great. I downloaded the CC3D ground station program on my laptop. The setup wizard has easy to follow directions and once done I set my default parameters and how I wanted to arm it and BAM the thing flies like a dream! I've flown it with a bunch of different batteries, below will be the battery type and how well it did. BTW the winds were really heavy and choppy today so it was fighting a hefty wind. and still performed great enough to pull off a lazy back flip.
FYI there is no low voltage warning the speed controllers will just execute the low voltage cut off.. I highly recommend timing your flight times with low altitude maneuvers until you know how long each battery lasts so you will avoid a crash!

3s 2200mah 40c- lots of power- battery was warm but not hot- 11min flight time
3s 2200mah 25c- decent power- battery was hott after flight- 6 min flight time
3s 1000mah 30c- decent power- battery was warm but not hot- 5min flight time
2s 5000mah 25c- gutless! full throttle it barely climbed (this battery was from my stadium truck)

so in reflection stay with a 3s lipo with at least a 30c rating. I cant wait to try a 4s lipo in this quick and nimble thing! ive been told these 250 class quads like between a 1300mah and 1600 mah battery with a high "c" rating

File dei clienti
Manual Download [2]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!