Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

LED PCB Strobe Red 3.3 ~ 6.0V con palla diffusore

Generating Links

LED PCB Strobe Red 3.3 ~ 6.0V con palla diffusore

Prezzo:

Now save risparmia 0,00 € 0,00 €

4,25 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9381000158
Spedizione gratuita? Clicca qui per saperne di più!

Questo PCB LED con diffusore palla "ping-pong" dotato di un led lampeggiante rosso che doppie lampeggia circa una volta ogni 1,25 secondi. Questi LED sono ultra-luminoso e facile da usare, è sufficiente montare il PCB al modello e collegare il conduttore di una fonte di alimentazione ~ 6.0V DC 3.3. Dispone di una spina di stile JR pre-installato per una facile "plug and play" compatibilità con la maggior parte dei ricevitori standard è sufficiente collegare in qualsiasi ricambio acceso canale.


Caratteristiche:
• spina di stile JR
• Bianco "ping-pong" diffusore palla
• luce stroboscopica LED

Specifiche:
Alimentazione: 3.3 ~ 6.0V DC
Consumo di corrente, ON Modalità: 25mA
Corrente assorbita, OFF Modalità: 1mA
Controllo ON / OFF: PWM, 1520uS
Colore: Rosso
Flash al minuto: 50
Dimensioni-PCB: 23x20x7mm
Dimensioni-Ball: 39,6 millimetri x 39,6 millimetri
Peso: 3.7g

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

richard9999 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 27, 2014

I bought this to put on the front of my V262 quad to aid orientation. With the ping pong ball diffuser on it was rather dim. I then removed the ping pong ball (using a heated knife blade to cut through the hot glue) and the thing was transformed - under the ping pong ball was a very bright LED with a wide "field of view" of maybe 100 degrees all round. The LED runs from 3.3-6.0V and so I used a female 2S battery connector (eBay) to tap 1S from the V262 LiPo male balance connector. I only needed the red and black wires from the JR servo plug connector of the strobe - with this mod it weighed only 3.0 gms (down from 7.5 gm) and I hot glued it to the front of the V262.

Before the test flight I balanced the V262 LiPo carefully and the cells were within 0.00V. The LED was very visible on the test flight, with a white cloudy sky, up to maybe 50m, and all you have to do is rotate the V262 so you can see the strobe and you know it is pointing towards you.. I don't know how good it will be with sunshine, but it has to help. After the flight of 7-8 mnts the LiPo cells were only 0.01V different. I have just ordered two more of these strobes and will put them on my 3S X525 and ST360, since this connection method is also applicable to 3S, tapping off 1S with a female 3S balance connector.

maybe sell it without the ping pong diffuser?

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!