Kit Telaio M250-C30 Quad

• Overall
• Quality
• Value

Customer Rated

May 13, 2016

Trs heureux de cet achat, look pas commun et montage basique.
Je l'ai construit pour voir avec les moteurs l'horizontale, a marche pas mal mais le plus sympa c'est de les incliner vers l'avant (comme sur le site) l a devient franchement intressant.
Excellent produit

Very happy with this purchase , not look common and basic editing.
I built to see the horizontal engines, it works ok but the most fun is to tilt forward ( as on the website) where it gets really interesting.
Excellent product

• Overall
• Quality
• Value

Customer Rated

Jan 19, 2016

frame arrived
no mounting doc
spacers missing
main frame lower board damaged. probably during the drilling process cause there are extra something like bizare hole in the front part weakening the piece, i hope it won't cause breaking point during the flight.

• Overall
• Quality
• Value

Customer Rated

Dec 19, 2015

Just assembled and flew this frame, running 3s with DYS 1806 motors and 12A Afro's. 5x4 Props. The quad is quite skittish and has slightly less thrust because of the outward angle of the motors, however, the frame has made up for this with its extreme yaw capabilities and abilities for bigger props. I think this frame can handle 7" props but 5 inch are fine with me. Lots of space inside and you could easily mount a mobius or runcam but a gopro you might struggle with unless you put it quite far back on the top plate. this is due to the propellors being atop the frame rather than on the bottom. The construction is quite strong and leaves a few spare bolts, however, the vibration dampening platform is badly designed and the rubber isolators struggle to connect the board and the frame. Because of this, i didnt use it. Overall, i really like this frame.

TL;DR:
its good and i like it