Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Matek Mini Power Hub w / BEC (5V e 12V)

Generating Links

Matek Mini Power Hub w / BEC (5V e 12V)

Prezzo:

Now save risparmia 0,00 € 0,00 €

4,73 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
090000021-0
Spedizione gratuita? Clicca qui per saperne di più!

Matek Mini Power Hub w / BEC (5V e 12V)

Il Power Hub Mini è stato progettato per offrire le massime prestazioni possibili e affidabilità in un 36 * 36 millimetri e 4 PCB. L'hub distribuisce energia da una batteria a 4 CES, così come, fornendo sincronizzato e regolata uscite DC per alimentare la macchina fotografica di, servi, trasmettitori video, LED, ecc Le batterie possono variare da 3S a 6S LiPoly. L'hub presenta anche un comodo punto di saldatura di vario voltaggio per la macchina fotografica e il video TX.

Questa scheda di distribuzione fa una grande aggiunta al vostro multi-rotore.

Caratteristiche:
• rame 2 once e 4 PCB
• schede ESC e saldare la batteria in coppia
• ponte di saldatura di vario voltaggio per fotocamera e VTX
• regolata 5V e 12V con indicatori di output LED
• Cortocircuito tollerante (10sec / min)

Specifiche:
Tensione in ingresso: 9 ~ 26VDC (3S ~ 6S LiPoly)
ESC uscite in corrente continua: 20A per uscita
ESC Uscite corrente di picco (10 sec / min): 25A per uscita
Uscita BEC 5V: Progettato per RC ricevitori, i controllori di volo, OSD e Servi
Uscita BEC 5V: DC / DC regolatore buck sincrono, l'efficienza è fino al 95%
Tensione di uscita BEC 5V: 5.0 +/- 0.1VDC
Uscita BEC 5V corrente continua: 3A
Uscita BEC 12V: La batteria dovrebbe essere 4S ~ 6S LiPoly
Uscita BEC 12V: uscita standard progettato per telecamere di potenza e trasmettitori video, ecc
Tensione di uscita BEC 12V: 12.0 +/- 0.2VDC
Uscita BEC 12V corrente continua: 2A (max 3A 10sec / min)
Dimensioni: 36 x 36
Peso: 6g
Fori di montaggio: 30,5 millimetri spaziatura piazza

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

PWDBB | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 21, 2016

The output of the 5v bec is 6 volts and the 12v bec outputs 14 volts on a 4s Lipo. The same board from another shop does output the correct voltages. But this was by far not the worst thing about the board.

At first everything seemed fine with the board. No short circuits. Quad was flying great. Then the whole of the board turned into ONE BIG SHORT CIRCUIT!!!! Resulting in magic smoke out of motors and esc's. (luckily refunded)

mulgish | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 06, 2016

Very nice power hub. Provides 5 v for my FC ,camera and receiver & 12 v for video transmitter and an LED strip. Holds 20 - 25 A without any problem.

File dei clienti
Manual Download [3572]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!