New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Micro GPS HKPilot E Bussola u-Blox NEO-6 e HMC5883

Micro GPS HKPilot E Bussola u-Blox NEO-6 e HMC5883

Now save risparmia 0,00 € 0,00 €

23,31 €
Stato:
Non disponibile!
SKU:
387000068-0
WANT FREE SHIPPING? Click here to find out more!

Il modulo GPS Micro e Compass New HKPilot è perfetto per il piccolo Multirotor di classe, gli aerei o anche l'applicazione OSD standalone. Caratterizzato il collaudato u-Blox NEO-6 chipset e un abbinato 25x25 doppia antenna amplificata in ceramica, questo micro GPS sta preparando potere full size. Il micro GPS ha anche la bussola HMC5883 Honeywell per la posizione remota, per ottenere la vostra bussola lontano da fonti di interferenza. Tutto questo potere e le caratteristiche, il tutto a solo 9,2 g, il HKPilot Micro GPS tutto così viene fornito con un cavo abbinato per la Mega Micro HKPilot (APM). Questo GPS Micro è anche perfetto per le applicazioni MWC e Naze32 pure.

Caratteristiche:
• Antenna di ceramica attiva, 25 × 25mm, è dotato di amplificatore a basso rumore di due LNA
• interfacce UART con disegno di protezione EMI, la porta RXD possono essere compatibili con l'ingresso del segnale di livello 5V
• Costruire in HMC5883 interfaccia I2C bussola
• HG-U06 GPS con un UART standard (TTL) interfaccia seriale, comune nella maggior parte dei comandi di volo
• Impostazione predefinita Velocità di trasmissione: 38400, velocità di aggiornamento: 5Hz
• u-blox 6 multi-GNSS (GPS, GLONASS, Galileo, QZSS e SBAS) del motore

Specifiche:
Dimensioni (mm): 27mm (larghezza) x 27 millimetri (lunghezza) × 6mm (H)
Peso (g): 9.2 (senza cavo)
Modulo GPS: u-blox NEO-6M
A bordo di interfaccia: Molex 1 millimetro-6Pin (I2C / UART)

Incluso:
Modulo GPS * 1
6pin al cavo 6pin * 1 (per le micro HKPilot)

* PX4 / Pixhawk è un open-source, progetto indipendente open-hardware che mira a fornire un autopilota di fascia alta alle comunità accademica, per hobby e industriali (licenza BSD)

** Il riferimento a APM si riferisce al progetto ArduPilot, una famiglia di autopiloti open source basato sulla piattaforma informatica open source Arduino, sviluppato da 3DR e la comunità open source. Si compone di una scelta di ArduPilot Mega (APM) di elettronica e una gamma di versioni di software libero per i veicoli diversi ed è governata da un open source

  • SKU 387000068-0
  • Brand H-King
  • Capacità ( mAh ) -
  • Peso 17.0000
  • Lunghezza 85.00
  • Larghezza 20.00
  • Altezza 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Looks like the neo 6 has trouble locking inside a building. Wanted to get my drone set up inside the house first through cleanflight. Recomending n8m gps instead....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks like the neo 6 has trouble locking inside a building. Wanted to get my drone set up inside the house first through cleanflight. Recomending n8m gps instead....

Bought this for my Naze32 afro mini Rev3 and it works fine, does take a little while to get a 3D fix but for the size and price its a win and it worked plug and play with baseflight, just soldered the SDA and SCL wires straight to the back of the Naze to the labelled pads and other 4 as per the Naze32 manual and when i connect it baseflight recognised both straight up :), didn't even have to change baudrate (so it must be 115,200). Team these up with a micro minimosd and you have a fully functional flight controller and osd for under AUD $90 and weights next to nothing. But you need to know what you are doing, youtube is your friend and flashing tools are required for the micro Naze and minimosd.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this for my Naze32 afro mini Rev3 and it works fine, does take a little while to get a 3D fix but for the size and price its a win and it worked plug and play with baseflight, just soldered the SDA and SCL wires straight to the back of the Naze to the labelled pads and other 4 as per the Naze32 manual and when i connect it baseflight recognised both straight up :), didn't even have to change baudrate (so it must be 115,200). Team these up with a micro minimosd and you have a fully functional flight controller and osd for under AUD $90 and weights next to nothing. But you need to know what you are doing, youtube is your friend and flashing tools are required for the micro Naze and minimosd.

Works great and finds satellites within 1 minute of power-up. Blue light blinks while acquiring satellites so you can see that things are working.
No comments. Reply..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great and finds satellites within 1 minute of power-up. Blue light blinks while acquiring satellites so you can see that things are working.
No comments. Reply..

very good product, i will asseble it in my quad i am sure it work fine

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good product, i will asseble it in my quad i am sure it work fine

Works great and finds satellites within 1 minute of power-up. Blue light blinks while acquiring satellites so you can see that things are working.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great and finds satellites within 1 minute of power-up. Blue light blinks while acquiring satellites so you can see that things are working.

it's very cool gps

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it's very cool gps

Customer files
No File Name Download [78]
pin out Download [6]
No File Name Download [347]
HMC5883 Pinout Download [140]
Pin-IN-OUT Download [6]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save