New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Micro Mega HKPilot Micro Sized regolatore di volo e pilota automatico con cavi 2.7.2 (APM)

Micro Mega HKPilot Micro Sized regolatore di volo e pilota automatico con cavi 2.7.2 (APM)

Shipped From:
  • USA
QTY:

Now save risparmia 0,00 € 0,00 €

46,74 €
Stato:
Disponibile
SKU:
387000063-0
WANT FREE SHIPPING? Click here to find out more!

Il HKPilot Mega Micro è un sistema autopilota sorgente e controllore di volo aperto completo con tutti lo stesso potere e le caratteristiche del suo fratello maggiore.

Il nuovo HKPilot Micro si basa sulla HKPilot 2.7 architettura con le tutte le stesse grandi correzioni per problemi noti di varianti precedenti, disponibili altrove. E 'creativo ridisegnato in un fattore di forma molto più piccolo sulla ormai popolare fattore di forma 35 mm, e tuttavia mantiene la piena funzionalità e porte dall'originale. Il HKPilot si basa sulla rapida evoluzione e raffinato mega Ardupilot o "APM", un progetto open source dalla robotica 3DR. Questo controllore di volo stupefacente permette all'utente di trasformare qualsiasi ala fissa, ala rotante, o di un veicolo multi-rotore (anche barche e automobili) in un veicolo completamente autonoma, in grado di eseguire una vasta gamma di compiti, anche programmati missioni GPS con waypoint e seguenti mi capacità (con il modulo GPS opzionale).

Diverse interfacce utente sono disponibili per la programmazione, la revisione tronchi, anche alcune applicazioni per smart phone e tablet. La radio telemetria opzionale consente la comunicazione radio bidirezionale offrendo un controllo totale e fornisce dati in tempo reale al tuo computer o tablet. L'elenco di ciò che questo controllore di volo è in grado di è stato rapidamente superato con ciò che non è possibile, con le caratteristiche, le modalità di volo e piattaforme supportate. Il progetto APM è supportato da migliaia di utenti che spingono questo controllore di volo open source per essere uno dei migliori sistemi disponibili.

Il nuovo MEGA HKPilot Micro perde nulla dal suo fratello maggiore, ma le dimensioni e il peso, consentendo per i veicoli più piccoli e leggeri. La mini è solo ad un passo più in HKPilots evoluzione.

Caratteristiche:
• Arduino Compatibile
• pre-saldato e collaudato
• giroscopio a 3 assi, accelerometro, magnetometro e ad alte prestazioni barometro
• Costruito in 4 chip di MP Dataflash per la registrazione automatica dei dati
• bussola Honeywell HMC5883L-TR digitale
• 6 DOF accelerometro / giroscopio MPU-6000 di Invensense
• Measurement Specialties MS5611-01BA03 barometrica sensore di pressione.
• Atmel ATMEGA2560 e ATMEGA32U-2 (trattamento e la funzione USB).
• Micro USB
• Supporto bussola esterno
• Ingresso GPS
• Ingresso IIC
• Modulo di potenza di ingresso
• porte dei sensori di radio telemetria, OSD e la velocità

Specifiche:
Dimensioni: 35x35x5mm
Peso: 5.3g

include:
HKPilot Mega 2.7.2 Micro
cavo 12pin * 1
Cavo 10pin * 2

Questo prodotto è basato sul progetto open source APM da 3DR Robotics, i file CAD per la licenza Creative Commons è disponibile nella scheda file.

* Nota: Questo non è un prodotto di marca originale Arduino.

  • SKU 387000063-0
  • Brand H-King
  • Capacità ( mAh ) -
  • Peso 35.0000
  • Lunghezza 95.00
  • Larghezza 15.00
  • Altezza 65.00
  • HK Pilot Micro
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Despite the fact that you are stuck with older arducopter firmware, this is still a really neat flight controller. The small size makes it practical in situations the original APM was not and the price is good for what it is. My biggest complaint is the wiring, I had to do a lot of splicing and dicing to make everything work with my setup. It works great once you get everything setup and tuned though. There are plenty of youtube videos / websites about the APM, so it's easy to find solutions to common issues.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Despite the fact that you are stuck with older arducopter firmware, this is still a really neat flight controller. The small size makes it practical in situations the original APM was not and the price is good for what it is. My biggest complaint is the wiring, I had to do a lot of splicing and dicing to make everything work with my setup. It works great once you get everything setup and tuned though. There are plenty of youtube videos / websites about the APM, so it's easy to find solutions to common issues.

I replaced a old APM 2.5 from 3DR with this and couldn't be happier. The form factor is much easier to work with and I'm already familiar with the configuration. It's almost a drop in replacement for the APM 2.5, except you will have to make cables for the 3DR power module, Telemetry/OSD, and possibly GPS. Once you get all the cables made, it works exactly the same. I just use this thing for Stabilize/Althold/Acro and it does that very well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I replaced a old APM 2.5 from 3DR with this and couldn't be happier. The form factor is much easier to work with and I'm already familiar with the configuration. It's almost a drop in replacement for the APM 2.5, except you will have to make cables for the 3DR power module, Telemetry/OSD, and possibly GPS. Once you get all the cables made, it works exactly the same. I just use this thing for Stabilize/Althold/Acro and it does that very well.

Might be worth noticing that this APM does not work with latest ArduCopter 3.2.1, but rather with 3.2 only. It is a setback especially since it took me half of weekend to figure out why there is no real feedback from the board (compass, gyro, RC stuff not moving while plugged to USB). Once I updated to ArduPlane firmware and confirmed everything works, I was able to single out the firmware as a problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Might be worth noticing that this APM does not work with latest ArduCopter 3.2.1, but rather with 3.2 only. It is a setback especially since it took me half of weekend to figure out why there is no real feedback from the board (compass, gyro, RC stuff not moving while plugged to USB). Once I updated to ArduPlane firmware and confirmed everything works, I was able to single out the firmware as a problem.

Easy to set up, build quality looks and feels solid. I have everything all hooked up and ground tested, now for a maiden flight! I am impressed so far1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to set up, build quality looks and feels solid. I have everything all hooked up and ground tested, now for a maiden flight! I am impressed so far1

Everything is as advertised except the barometer is very glitchy and will not hold altitude. Vibration levels are well within acceptable limits, but the baro will still put out very large spikes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Everything is as advertised except the barometer is very glitchy and will not hold altitude. Vibration levels are well within acceptable limits, but the baro will still put out very large spikes.

After some days of test I have return the board to HobbyKing.
The board after a while became extremely hot , around 60 Celsius
I add a little heat disspator on the two IC between the Usb port and the reset button and solve partially the problem but the board was very difficult to tune .
I had to always to trim a lot at each flight, there were oscillations impossible to eliminate with PID tuning.
Alt Hold did not work well even if there was a low vibations level, but the baro test report 42Celsius while the room temp was 19, do not know if that affects Alt Hold.
Then the compass stop to work and I decide to return the board.
My quad was a 250 mm class with 5040 props and a AWU weight of 170 - 230 grams (with Mobius camera).
I have mount on the same frame and setup a standard APM board and if flew perfectly without any tuning at first try.
It might be my unit with problems but I was deceive by the board quality.
If you purchase this product you should remember that the last version of APM firmware that can be load on a 8 bit board is the 3.2.1.
Some spare extra connectors and cables would be welcome .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After some days of test I have return the board to HobbyKing.
The board after a while became extremely hot , around 60 Celsius
I add a little heat disspator on the two IC between the Usb port and the reset button and solve partially the problem but the board was very difficult to tune .
I had to always to trim a lot at each flight, there were oscillations impossible to eliminate with PID tuning.
Alt Hold did not work well even if there was a low vibations level, but the baro test report 42Celsius while the room temp was 19, do not know if that affects Alt Hold.
Then the compass stop to work and I decide to return the board.
My quad was a 250 mm class with 5040 props and a AWU weight of 170 - 230 grams (with Mobius camera).
I have mount on the same frame and setup a standard APM board and if flew perfectly without any tuning at first try.
It might be my unit with problems but I was deceive by the board quality.
If you purchase this product you should remember that the last version of APM firmware that can be load on a 8 bit board is the 3.2.1.
Some spare extra connectors and cables would be welcome .

Piece of garbage. Many QC issues apparent in this FC which of course affect it's performance. Not fit for purpose as advertised.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Piece of garbage. Many QC issues apparent in this FC which of course affect it's performance. Not fit for purpose as advertised.

This is my second APM board. Up graded from Naza32 to this on my 250 quad. Love how locked in this seems to be compared to the naza. This is a great value for all the feature this board has to offer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my second APM board. Up graded from Naza32 to this on my 250 quad. Love how locked in this seems to be compared to the naza. This is a great value for all the feature this board has to offer.

I have two of these boards purchased on separate occasions. Both have problems. First one generates a lot of glitches on the barometer and other sensors, it can function in stabilize mode but not loiter, I suspect a bad barometer. Second unit will not do an initial calibration, sporadically will not connect to USB, and is unuseable. This makes three bad APM clones from Hobbyking, the first one was a different model which had poor solder joints on the USB which detached and destroyed the board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have two of these boards purchased on separate occasions. Both have problems. First one generates a lot of glitches on the barometer and other sensors, it can function in stabilize mode but not loiter, I suspect a bad barometer. Second unit will not do an initial calibration, sporadically will not connect to USB, and is unuseable. This makes three bad APM clones from Hobbyking, the first one was a different model which had poor solder joints on the USB which detached and destroyed the board.

much better than my old crius v1, my deadcat flyes great with this

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

much better than my old crius v1, my deadcat flyes great with this

  1. 1
  2. 2
Customer files
SSH-003T-P0.2 CONNECTOR Download [107]
SSH-003T-P0.2 Download [92]
AVR USBASP Download [104]
diagram1 Download [516]
No File Name Download [404]
No File Name Download [195]
No File Name Download [37]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save