New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Micro MWC Flight Control Consiglio DSM2 Compatibile X4 del CES spazzolato integrato

Micro MWC Flight Control Consiglio DSM2 Compatibile X4 del CES spazzolato integrato

Shipped From:
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

31,55 €
Stato:
Disponibile
SKU:
9154000007-0
WANT FREE SHIPPING? Click here to find out more!

Questo è un incredibile all-in-one micro controllore di volo MWC con un ricevitore compatibile con 6 canali integrato DSM2 e 4x spazzolato ESC di! Questo controllore di volo racchiude la potenza di un accelerometro e giroscopio ATMEGA328P microcontroller e MPU6050, tutta questa tecnologia viene schiacciato su una scheda delle dimensioni di un francobollo! Esso viene fornito con un bootloader e MWC 2.2 ed è aggiornabile e sintonizzabile ha gettato la porta FTDI sulla scheda.

Questo è l'inizio di un micro quad impressionante o un serio aggiornamento a un micro quad esistente che è solo chiedendo per la potenza della piattaforma di MWC.

Caratteristiche:

• ATMEGA328P
• MPU6050 accelerometri / giroscopio
• UART per la comunicazione FTDI
• Piattaforma MWC supportata
• Integrated 2A spazzolato X4 del CES
ricevitore compatibile • integrato 6 canali DSM2
• bootloader precaricato e MWC 2.2

configurazioni:
4 Rotore (X, Y, Y4)
6 del rotore (Y6, X6, Y) 6Rotors richiedono esterna ESC di

Specifiche:
Dimensione: 32X20X4.8mm
Peso: 1.8g
Tensione di funzionamento: 3.2-4.2v (1s Lipoly)
Modulazione: DSM2
ESC: 2A spazzolato X4 integrato
Antenna Lunghezza: 30mm

* Se si desidera che le opzioni di Baro / Mag / GPS si prega di guardare il MINI MWC FC
* Trasmettitore per MICRO MWC scheda di controllo di volo deve supportare DSM2 e 4CH o superiore (si consiglia 6CH o superiore)

  • SKU 9154000007-0
  • Brand -
  • Capacità ( mAh ) -
  • Peso 14.0000
  • Lunghezza 30.00
  • Packaging Width 5.00
  • Altezza 20.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Was a bit of a pain to solder given the size but man, what a hell of a little FC. On my first battery change I plugged in a battery that was wired backwards which let to a huge spark and a small fire. I immediately unplugged it and plugged in another battery... the thing just kept going like nothing happened.

Would buy again!

RC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Was a bit of a pain to solder given the size but man, what a hell of a little FC. On my first battery change I plugged in a battery that was wired backwards which let to a huge spark and a small fire. I immediately unplugged it and plugged in another battery... the thing just kept going like nothing happened.

Would buy again!

RC

Ich hatte ebenfalls beim ersten Start den Totalausfall aller FETs.
Dadurch wurde das Board fr mich unbrauchbar.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich hatte ebenfalls beim ersten Start den Totalausfall aller FETs.
Dadurch wurde das Board fr mich unbrauchbar.

Quite good product. A bit too expensive.. If you do your homework, you will not burn the FETs. Ive not tried run the stock firmware. Depends on the motors, you need to adjust the config files. My old, micro quad with broken electronics flies again. Does the loops, flips, very stable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite good product. A bit too expensive.. If you do your homework, you will not burn the FETs. Ive not tried run the stock firmware. Depends on the motors, you need to adjust the config files. My old, micro quad with broken electronics flies again. Does the loops, flips, very stable.

The Fets (3 of them!) burned out at first motor start. It's a common problem, must be wrong Fet type for the job. I am EE with tools for SMD work, so I replace. But this board is just unusable as it was sold.
Browsing the forums it is a common problem, faulty series.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Fets (3 of them!) burned out at first motor start. It's a common problem, must be wrong Fet type for the job. I am EE with tools for SMD work, so I replace. But this board is just unusable as it was sold.
Browsing the forums it is a common problem, faulty series.

First I made a adapter cable to connect the serial port to the PC, using 2 of HK JST-SH 3pin plugs, cutting them into 2 halfs and glueing together for a 4 pin plug. 3.3V level requires a level shifter 3.3V <-> 5V, then it worked perfect.

Preloaded firmware works with my ladybird quad very well, good and stable autolevel, only yaw rate is bit low.

The spektrum RX part works well, bind was quick and successful with my DSM2 HF module.

Would be interesting to have to board even smaller and w/o spektrum HF, so alternative RX modules could be attached (e.g. Jeti sat).

Great, would buy it again!
Henning

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First I made a adapter cable to connect the serial port to the PC, using 2 of HK JST-SH 3pin plugs, cutting them into 2 halfs and glueing together for a 4 pin plug. 3.3V level requires a level shifter 3.3V <-> 5V, then it worked perfect.

Preloaded firmware works with my ladybird quad very well, good and stable autolevel, only yaw rate is bit low.

The spektrum RX part works well, bind was quick and successful with my DSM2 HF module.

Would be interesting to have to board even smaller and w/o spektrum HF, so alternative RX modules could be attached (e.g. Jeti sat).

Great, would buy it again!
Henning

It does what it says and is really the only brushed multiwii board I could find. I managed to upload and connect the GUI to it but I had to buy a 4-pin JST-SH connector elsewhere and connect that to my FDTI. That said, I really like this board, very stable flight and autolevel capable. Brought new life to my v939.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It does what it says and is really the only brushed multiwii board I could find. I managed to upload and connect the GUI to it but I had to buy a 4-pin JST-SH connector elsewhere and connect that to my FDTI. That said, I really like this board, very stable flight and autolevel capable. Brought new life to my v939.

Good things:
- It is very small.
- It works.
- Comes with bootloader and software installed.
Bad things:
-The serial connector is not standard an HK WONT SELL THEM.
-If you want to connect the GUI your in trouble.
-If you want to update the soft your in trouble.
-motor drivers have no flyback diode installed.
-The reset line is not connected to DTR so you have to ... be really lucky to update the soft with arduino bootloader.

Summing it:
If you like trouble this is for you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good things:
- It is very small.
- It works.
- Comes with bootloader and software installed.
Bad things:
-The serial connector is not standard an HK WONT SELL THEM.
-If you want to connect the GUI your in trouble.
-If you want to update the soft your in trouble.
-motor drivers have no flyback diode installed.
-The reset line is not connected to DTR so you have to ... be really lucky to update the soft with arduino bootloader.

Summing it:
If you like trouble this is for you.

Customer files
No File Name Download [568]
how to load/update firmware Download [1112]
Stick Commands Download [363]
No File Name Download [363]
Motor-/Stick Configuration Download [598]
True Motor Configuration from www.quadfl Download [167]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save