Mini T connettore nero (10 coppie)

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 28, 2015

Good little connector, only problem is gripping them to pull apart.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 28, 2015

great little connecters.

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 04, 2015

Good for saving space in my 250 racer.

Would not recommend for use as battery connection

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 25, 2015

Great little connectors! Fit together snugly - not too tight and not loose at all. These can take almost twice the amps they are rated for!

• Overall
• Quality
• Value

Customer Rated

Mar 15, 2015

After a couple brow-outs and crashes on my 'sacrificial test foamy' I discovered that these connectors loose contact. to compensate for this I had to bend the tongues a couple degrees away from the spring side. make sure you wiggle the connection a couple times and watch out for brown-outs, like the ESC resetting. I was able to reproduce this issue on 3 different pairs (all I have in use!) and assume that the tolerances are to loose on the whole batch.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 20, 2015

Very nice mini size t-connectors. Quality seems fine and price is great. I bought these for connecting some lights and to replace jst connectors. I don't mind soldering so these should work great. Recommend!

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 22, 2014

Cute little deans type connector to save weight on a micro quad. They go together really well and enough spare to make an adaptor for a charger.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 23, 2014

ok plusplusplus okplusplusplusplusplus ok plusplusplusplus plusplus plus

• Overall
• Quality
• Value

Customer Rated

Aug 30, 2014

I pleased to say that these seem to be manufactured well! The casting is fine. They index fine. There is however one problem. Notice in the picture above that the metal contact (female side) extends all the way out to the end of the plastic. This design oversight will allow inadvertent cross polarity and possible component damage. The genuine Deans and HK Version has a recessed contact preventing cross polarity. BE CAREFUL NOT TO FRY YOUR BITS! A simple fix may be to use pliers to pull the contact out of the plastic a little bit. Please consider fixing this HK. Fair winds and clear skies.

• Overall
• Quality
• Value

Customer Rated

Jul 23, 2014

Some decent little connectors. I use them instead of JST plugs. Though the plastic part is kinda weak so you don't want to heat them too much when soldering, I would highly recommend putting a pair together when soldering, that helps to spread the heat around.