Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

v1.1 Minim OSD

v1.1 Minim OSD

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
20 g
SKU:
387000015
Descrizione
prodotto

Si tratta di un mini Arduino basato su schermo tabellone. È adattato per l'uso con ArduPilot Mega e il protocollo MAVlink e progettato per essere il più piccolo possibile.

E 'componenti principali sono un po' microcontrollore ATmega328P 8 con un bootloader Arduino, e una in bianco e nero MAX7456 visualizzazione su schermo. La programmazione avviene tramite un cavo a 6 pin compatibile FTDI.

È dotato di due sezioni di potenza e di terra indipendenti per isolare stadio analogico del OSD: una sezione + 5V per il ATmega e la fase digitale del OSD, alimentata attraverso il cavo FTDI o altra fonte di + 5V; ed una regolata + 5V sezione per la fase analogica del OSD, alimentato attraverso il video in / out intestazione e in grado di gestire fino a + 12V in ingresso.


Caratteristiche:


• ATmega328P con Arduino bootloader
• MAX7456 monocromatico visualizzazione sullo schermo
• Cavo FTDI piedinatura compatibile
• intestazione ISP standard a 6 pin
• Due sezioni di alimentazione indipendenti con un indicatore LED su ogni
• saldatura ponticelli per combinare le parti di potenza
• + 5V regolatore di 500mA per l'ingresso fino a + 12V (5-12V gamma)
• ponticello a saldare opzione di video PAL per
• Esposto punti di prova per HSYNC e LOS

Specifiche:
Tensione: 5-12V
Dimensioni: 50 x 18 x 10mm
4g peso

Si prega di consultare il file caricato nella scheda file per i crediti Developer, link al codice sorgente e altre informazioni!  

* Nota: Questo non è un prodotto di marca originale Arduino.

Product
Specifications

Ulteriori informazioni

  • SKU:
    387000015
  • Brand:
    No
  • Peso (g)
    20.00
  • Lunghezza
    55.00
  • Larghezza:
    20.00
  • Altezza:
    30.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great OSD! Fully customizable and programmable. Great value for the price and quality. All fans of flying first person - I recommend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good OSD, great quality as always
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality.

Works immediately.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These things are amazing. Someone even figured out how to get FrSky telemetry on this.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OSD works a treat with APM 2.6. Update the firmware with a ftdi and you have a good osd.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cheap and powerful, these will connect to the Naze32, MultiWii, APM, and Pixhawk. Out of the three I've bought, one has succumbed to a voltage spike. This was most likely caused by a crash and not a defect in the product itself. In general, I'm very happy with these.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bought this osd to go with my first MultiWii.

though not setup out the box to work with MW boards (set for APM & PIXHAWK standard) theres tons of simple info and advice available all over the place and as this OSD is long established there are many available firmwares to suit just about any FC out there, Took a noob like me half an hour to flash new firmware via a Ftdi adapter and configure the display before I was out and in the air with my new OSD working a treat. WORTHY OF NOTE(as not mentioned here).... The V1.1 and newer versions DO NOT suffer the same overheat failures that the earlier versions did so the 12v side of the board can now be happily fed with a 12v feed (as was intended)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
??????????? ????? ? ???? ???????= ???????? - ??? ???????? ) ?????? ????? ?????? ? ?? ??????? ) ??? ?????? ???????? ) ?? ?????????????? ???????? ???????????? )
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice Osd with an awesome price! You can have all the information from this little board but be careful if you are a newbie because it requires some skill! It's not plug and fly but once correclty setup it works like a charm. there are a lot of useful videos on how to program and install it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Two units was bought. MCU (not video chip) of the first one fried after two days of usage. After replacement of the dead MCU I have the same problem- inadequate temperature of the MCU. Nevertheless it still working after putting heat sink on the chip.
Second unit works perfectly except one thing: it is impossible to configure it through the serial link as the Tx channel of the OSD is dead. The quality of this product is really disappointing.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.