Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

MKS DS1210 Titanium Gear Servo (0,12 sec / 10kg-cm)

MKS DS1210 Titanium Gear Servo (0,12 sec / 10kg-cm)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
185 g
SKU:
DS1210

Combine

essential items and
acc
Descrizione
prodotto

Caratterizzato da un treno di ingranaggi in titanio e acqua / prova della polvere caso sigillato il MKS DS1210 può essere caduto in acqua, incrostati di fango o sepolti nella sabbia e ancora tornare per di più! Perfetto per camion e passeggini. servi MKS sono ben rispettati in Taiwan, Corea e Giappone.

Specifiche:
Banda morta: 0.002ms (Default)
Sistema di controllo: + Pulse Width controllo
Frequenza di lavoro: 120Hz
Pulse (RX) richiesto: 3.0 ~ 5.0 volt picco a picco onda quadra
Tensione di funzionamento: 4.8 ~ 6.0 V Volt CC
Range di temperatura: da -10 a + 60 gradi C
Velocità di funzionamento (4.8V): 0.15 sec / 60 ° gradi a vuoto
Velocità di funzionamento (6V): 0.12 sec / 60 ° dagrees a vuoto
Coppia di stallo (4.8V): 8.05 kg-cm (292,4 oz / a)
Coppia di stallo (6V): 10 kg-cm (365,3 oz / a) 360 °
Modifiable: NO
Tipo motore: Motore CC
Potenziometro propulsione: Direct Drive
Tipo inserto: FET
Tipo cuscinetto: Dual cuscinetti a sfera
Tipo Gear: Metal Gear
Programmabile: NO
Lunghezza del legare del connettore: 15,0 cm (5,9 in)
Dimensioni: 40X20X40.30 mm (1.5748X0.7874X1.58 a)
Peso: 56 g (1,97 once)

Product
Specifications

Ulteriori informazioni

  • SKU:
    DS1210
  • Brand:
    N/A
  • Capacità ( mAh )
    No
  • Peso (g)
    185.00
  • Lunghezza:
    0.00
  • Larghezza:
    0.00
  • Altezza
    0.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very very good servo on T-Rex 600 or HK600 for cyclic. good torque, good speed, centering very well, and legendary MKS quality for a mini price!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought one just to try when it first arrived. Put it in a Traxxas Slash 4x4, and it was a very noticeable upgrade compared to the stock servo. Have run it in pretty harsh conditions, and it seems to take the punishment well. Five stars all round. I just wish it would come in stock again so I could buy more of them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
At first I installed this servo in my Inferno 1/8 buggy steering and it worked great, now I am using it in a Associated B4.1, almost way too much torque and speed. Very recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This servo works great! I am using it as my steering servo for my Losi LST 2. Since the splines on this servo is the same as a futaba I had not problems with the stock servo saver. The only comment have is that the stall torque is listed incorrectly on this site. I am pretty sure @6v it is 138.87oz/in and NOT 365.3oz/in. You should check yourself to make sure.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Servo muy rapido, montado en mugen mbx6 dos meses sin problemas. Envio en 3 semanas por air mail normal (envio barato)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed one in my Inferno 7.5 buggy and it is really good! Fast, strong and cheap. I recommend for any 1/8 buggy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using these servos on my HK600GT... All i can say is wow. I am impressed they are super fast, super strong and very percise. I will use these on any Heli that I build that can take this size servo.Other servos that have faster specs aren't always fast when there is a load on it. these are so strong the load has no effect on the speed. SUPER SERVO.

I enjoy flying my HK600 better then my real trex helis cause of these.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Put 3 of these in a T600 Esp. Need to mod a little bit because they are to long. Nothing hard to do. This servo looks very good, it's strong, quick and not too noisy. They will be perfect for my T600 FBL
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good vervo on HK600GT cyclic. good torque, good speed, centering well. One of theim makes noise sometimes but no issue so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this servos from month in my nitro heli - Elyq vision 50 Ultimate on swashplate and they work great. Servos are fast and strong. Execution is in the highest level. Extra advantage is waterproof. Watch this video http://www.youtube.com/watch?v=Wo0ucXOzWJI&feature=player_embedded
I chose those servos because this is best choice for someone who wants best product for lower price. I recomend it for nitro and electric 600 and 700 size heli.
Best Regards
David from Poland
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.