Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Multi-rotore Rotolo / Tilt GoPro Hero 2 Camera Mount

Generating Links

Multi-rotore Rotolo / Tilt GoPro Hero 2 Camera Mount

Prezzo:

Now save risparmia 9,34 € 9,34 €

Special Price 4,01 € 4,01 €

You save risparmia 9,34 € 9,34 €

Was  13,35 €

Quantità:
Spedito da:
  • USA
  • Global
Stato:
disponibile
SKU:
9171000148
Spedizione gratuita? Clicca qui per saperne di più!

Inizia la cattura di video sorprendente aerea con il telaio multi-rotore e questo rullino fotografico / inclinazione di montaggio! Questo supporto è progettato per adattarsi montare fotocamera twin-rail frame multi-rotore, come Bumblebee, Ideafly etc.

Questa fotocamera offre monte si tira e inclinare il controllo della vostra macchina fotografica a bordo durante il volo. È costruito da vetroresina e in lega di alluminio che offrono rigidità risparmiando peso. I punti di fissaggio per il rotolo e di inclinazione servi sono pre-tagliati e ospiterà la maggior parte dei servi mini / micro senza modifiche.

Tutto l'hardware necessario è incluso per installare questo monte alla cornice. Sarà sufficiente aggiungere il proprio mini / micro servi e macchina fotografica.

Specifiche:
Montaggio telecamera Max Larghezza interna: 82 millimetri
Montaggio telecamera Max interno Altezza: 44mm
Peso (inc tutto l'hardware.): 85g

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Jim | Acquirente verificato

  • Overall
  • Quality
  • Value

Multi-Rotor Roll/Tilt GoPro Hero 2 Camera Mount

Jan 06, 2023

Would be very nice if the rubber mounting grommets were also provided. They seem to be difficult to find anywhere. And a good servo recommendation would be beneficial also. HiTec HS-55's will sort of work. But the servo for the horizontal axis does not line up well.

RCJunky.uk | Acquirente verificato

  • Overall
  • Quality
  • Value

Lots of Bang for your bucks

Aug 05, 2019

Looks daunting when you look at the bag of bits and no instructions but goes together easy. Build instructions are in the files section.

Kokes | Acquirente verificato

  • Overall
  • Quality
  • Value

Good

May 02, 2019

Dobrý

Blade Boy | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 17, 2016

this is a little big but works very well.it is very light and strong. well worth the price.

Jason | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2015

Great light weight gimbal. Assembly results in a solid, sturdy unit that will hold a variety of cameras. There is a youtube video that helps see what each step of the process looks like.

Uwe | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 19, 2014

Gutes Produkt.

Leider keine Dmpfergummis mit dabei.
Kleiner Hammer zum zusammenbau bentigt.

Wie wird die GoPro 2 denn befestigt???

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 27, 2014

it could have been better cut so you don't need a hammer. Could have provided instructions. Could have had other options for mounting and provide the rubber grommets for around the tubes

Peter | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 17, 2014

A nice piece of kit! Pretty easy to put together. I use it on a Bumblebee quad and don't even have a GoPro but have modded it with some ply to fit a Sony CCD camera inside the GoPro hatch. Originally, I used plastic analogue servos to control it, but they started to get a bit old an jittery (pre-used). So splashed out on some Digital Metal Gear servos and WOW... It's smooth and does a good job!

hipertommy | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 09, 2014

works well with naza lite

Roger | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2014

I knew when I ordered this gimbal that it would be a challenge and it was. I was very impressed with the design and I'm sure it will perform quite well, but folks, it is a kit in every sense of the word. It reminded me of my childhood days when an airplane kit as a box of sticks, some tissue paper, and a picture of an airplane. The design is excellent, the material is very good, but there are two flaws. First, the slots are cut too small to accept the tabs they are supposed to receive. You must grab your jewelers file and 'dress' every joint. Second, the pivots are a bit tricky and just barely strong enough for the job. But HEY! - It only costs about eleven bucks and just requires a couple of three dollar micro servos to complete. How can you beat that? If you want perfect go get get a seventy dollar gimbal and some fancy motors for it. Personally, I enjoyed this build (about four hours) and I know it will provide results far, far beyond the eighteen bucks I put into it. It's a lightweight with a middleweight punch. If you're a hobbyist, this is you gimbal; if not you will have problems.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
File dei clienti
Servo output mount to camera carrier Download [2907]
IFLY-4 general view Download [3188]
IFLY-4 installation Download [3022]
Front view Download [3031]
Manual - Multi-Rotor Roll/Tilt GoPro Her Download [2062]
Assembly Guide for GoPro Camera Mount wi Download [3688]
Assembly Guide for GoPro Camera Mount wi Download [3688]
No File Name Download [2062]
Anleitung Download [2062]
Gimbal Exploded Diagram Download [147]
  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!