New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Multifunzione Care-fitness granchio FPV atterraggio set (nero)

Multifunzione Care-fitness granchio FPV atterraggio set (nero)

Shipped From:
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

16,81 €
Stato:
Disponibile
Peso:
394 g
SKU:
450000023-0
WANT FREE SHIPPING? Click here to find out more!

Il "No Worries 190" stand multifunzione FPV, è un modo semplice e forte per aggiungere "Granchio gambe" con l'asta e il montaggio di Multi-rotore o Heli ferroviario gancio. Il design consente il montaggio di quasi ogni tipo di telaio con le fascette in stile tubo piastra inclusi che forniscono urti e vibrazioni di protezione con pattini e tappi di assorbimento d'urto. Questo montaggio stile permette al centro di essere libera per il montaggio di giunti cardanici della macchina fotografica, batterie e accessori con le piastre di binario inclusi. Con spazio poco più di 200 millimetri terra e vari accessori e opzioni di colore è possibile progettare un sistema che si adatta al vostro visione previsto.

Specifiche:
Altezza: 205mm
Larghezza: 300mm (base) 60 millimetri (Top tube to tube)
Lunghezza: regolabile da 30mm a 250 millimetri di lunghezza 330 millimetri Skid
Peso: 230g con tutte le parti inclusi

Incluso:
Skids x 2
binari superiori x 2
Leg incornicia x 2
monta ferroviari a piatto o un bullone gettato guaina resistente agli urti x 12
fine della guida tappi x4
scossa Skid assorbimento testate x 4
Due piastre trasversali
Due piastre accessorie
hardware richiesto

  • SKU 450000023-0
  • Brand Unknown
  • Capacità ( mAh ) -
  • Peso (g) 394.00
  • Lunghezza 340.00
  • Larghezza 30.00
  • Altezza 265.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought this landing gear for my Q450.
It is not perfect but for the price, it is more than recommended.
I used it for my first flight and it prevented my quadcopter to break multiple times.
Here is a post where I describe the list of components of my quadcopter: http://xavier.smart-it.be/2015/06/my-first-drone-is-a-q450-quadcopter-with-pixhawk.html?m=1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this landing gear for my Q450.
It is not perfect but for the price, it is more than recommended.
I used it for my first flight and it prevented my quadcopter to break multiple times.
Here is a post where I describe the list of components of my quadcopter: http://xavier.smart-it.be/2015/06/my-first-drone-is-a-q450-quadcopter-with-pixhawk.html?m=1

This is a great piece of kit.Hope to fit it to myX525

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great piece of kit.Hope to fit it to myX525

As noted by others the screw fittings are bad, and takes along time to fit, but it does go together. the weight is very wrong, they state 230gr, but it is 305gr.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As noted by others the screw fittings are bad, and takes along time to fit, but it does go together. the weight is very wrong, they state 230gr, but it is 305gr.

Quality is good, BUT the brass screws and screw threads are absolutely horrible to thread in.... it took me over 2 hours JUST TO ASSEMBLE IT! I had to carve out some of the plastic that was over each brass insert and press hard on the brass eyelets with a tiny allen key and rotate my body around the frame 360 degrees or more while keeping it perfectly straight or it would thread in wrong. When I finally got it together it was fine, I broke one screw eyelet in the process though...

The frame is quite solid now, I bolted it to my hexacopter with some spare mechano nuts and bolts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality is good, BUT the brass screws and screw threads are absolutely horrible to thread in.... it took me over 2 hours JUST TO ASSEMBLE IT! I had to carve out some of the plastic that was over each brass insert and press hard on the brass eyelets with a tiny allen key and rotate my body around the frame 360 degrees or more while keeping it perfectly straight or it would thread in wrong. When I finally got it together it was fine, I broke one screw eyelet in the process though...

The frame is quite solid now, I bolted it to my hexacopter with some spare mechano nuts and bolts.

The design is slightly fragile

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The design is slightly fragile

Will not fit the ack gimbal! Show it as accessory, but clearly is one inch too short to clear. My mistake. Gimbal sits@ 230 mm high, and the landing is WITH FOAM 205mm high. Very very good quality. Would recommend

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Will not fit the ack gimbal! Show it as accessory, but clearly is one inch too short to clear. My mistake. Gimbal sits@ 230 mm high, and the landing is WITH FOAM 205mm high. Very very good quality. Would recommend

Fantastic landing gear. I have these mounted to an x550 quad. I had to make some mounting rails for them to fit, but a small effort for a big gain. The trays that these skids come with provide more than enough room for cameras, gimbals, batteries, buzzers, lights and whatever else you might fee the need to stick on there. High quality, low price, great stuff!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic landing gear. I have these mounted to an x550 quad. I had to make some mounting rails for them to fit, but a small effort for a big gain. The trays that these skids come with provide more than enough room for cameras, gimbals, batteries, buzzers, lights and whatever else you might fee the need to stick on there. High quality, low price, great stuff!

The brass inserts in the plastic eyelets were a bit dodgy but it went together ok. Screw mounts matched the HK550 Hex frame no problem, using a 4S 4000 battery and gopro seems to handle the weight no problem. pretty happy with it for $18 bucks :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The brass inserts in the plastic eyelets were a bit dodgy but it went together ok. Screw mounts matched the HK550 Hex frame no problem, using a 4S 4000 battery and gopro seems to handle the weight no problem. pretty happy with it for $18 bucks :)

great multifunction landing gear went easy onto my dj550 lots of mounting options for cameras , etc keep up the great products

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great multifunction landing gear went easy onto my dj550 lots of mounting options for cameras , etc keep up the great products

great landing gear!! I just put it on my octocopter and it looks awesome!! it does a really good job with the vibration! perfect for my gopro!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great landing gear!! I just put it on my octocopter and it looks awesome!! it does a really good job with the vibration! perfect for my gopro!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!