Multistar Elite 2204-2300KV Multi-rotore del motore (CW Adapter Prop)

• Overall
• Quality
• Value

Working good

Feb 26, 2018

Working good, Value for money is very good

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 04, 2016

Motores excepcionais para mini-quad. Acompanhados com o ESC Afro 12A v3 rocam nas horas, e não aquecem muito.

É pena que a indicação CCW e CW digam respeito ao spinner e não à rotação do motor. Para ultrapassar este problema troquei os spinners nos motores e agora está correcto.

• Overall
• Quality
• Value

Customer Rated

Jul 18, 2016

The Motors are well built, if you have luck.
I purchased 4 and two had a darker color and had quite strong vibrations. The other two were perfectly smooth and run very cool.
The Windings are very good, but the bearing seem to fail after a pretty short time.
After around 30 Flights they are already making typical noises of bearing failure and i am sure the won't last long.

• Overall
• Quality
• Value

Customer Rated

Jun 25, 2016

Very good powerful motors. You can buy 4 of these then replace the prop adaptors but the CCW prop adaptors don't fit top ell on the motor but the FPV quad still is flying perfectly with no problems. I used 12 12amp ESC's and a 3s 2200mah zippy battery. My flight time is a good 6 minutes in which I was using all the functions on my RC transmitter. The speed of these motors are very fast and even on a self-level mode you still go very far.

• Overall
• Quality
• Value

Customer Rated

Jun 03, 2016

Been using these for about 6 months, they handle 5045 triblades bullnose on 4S like a charm. I feel like the bearings had wear a little, but I think is normal after so many dozens of packs flown.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 02, 2016

Not a bad motor for this price, seems to get hot fairly easily.

• Overall
• Quality
• Value

Customer Rated

May 25, 2016

1 out of 4 already dead (burned) after 15 hours flight time. Used on a 3s setup with 5030 propellers. When they run they are really good and very efficient but unfortunately they don't last very long. So my advice: Don't buy them.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 08, 2016

I ran my quadcopter straight into the street at about a 45 degree angle and the motor still works! It must have been going around 70mph on impact.

• Overall
• Quality
• Value

Customer Rated

Feb 20, 2016

These Multistar Elite 2204 motors are quite good. Ive had them for over a year now, and am very pleased. Right out of the package the motor bell was well balanced, and no addition of tape would reduce the already minimal vibrations the motors had. They have experienced a little wetness and a lot of hard crashes, theyve outlived 2 frames and are on their third, albeit not CF frames, and are still running well. The bearings are not showing signs of rust yet, and have only now begun to sound like they may have dirt in them or be failing, but the bell is not loose. I would estimate they have over 20 hours of actual run time on them.
I fly a 250 size quad on 3s For the first few months it was 5030 and 5040 gemfan props, then I moved to 6030 gemfan props(larger frame). Both run well with a 12A ESC, and nothing would get too hot after hard flights, just some warmth in the ESCs. The prop/power data displayed on the HK website seems pretty accurate from my experiments. I recommend these motors, however you should buy the ones with the different CW & CCW prop adapters if you prefer using the prop spinners. I used M5 lock nuts for holding the props on after crashing twice from self-loosening nuts on the CW motors.

• Overall
• Quality
• Value

Customer Rated

Feb 06, 2016

These are great motors but I do not recommend their spinners. They fall off really easily. I bought nylon nuts (locking nuts) to use instead. The motors are outstanding though.