Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati

USB MultiWii MicroWii ATMEGA32U4 regolatore di volo / BARO / ACC / MAG

USB MultiWii MicroWii ATMEGA32U4 regolatore di volo / BARO / ACC / MAG

Now save risparmia 20,40 € 20,40 €

Special Price 8,42 € 8,42 €

You save risparmia 20,40 € 20,40 €

Was  28,82 €

Non disponibile!
Stock:
OUT OF STOCK
Peso:
34 g
SKU:
9387000008

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Descrizione
prodotto

Il MicroWii è un controller completo di volo multi-rotore. Essa si basa sulla ATMEGA32U4, che è il processore della Arduino Leonardo. Il MicroWii incorpora un chip di MPU-6050, che è un giroscopio e accelerometro combinato più un preciso barometro MS5611 e HMC5883L magnetometro.

Questa è l'ultima soluzione per potenti prestazioni di volo con il progetto multi-rotore. Le possibilità sono infinite con il MicroWii, limitato solo dalla vostra immaginazione!

Caratteristiche:
• USB on chip (senza FTDI o UART necessari)
• porta seriale libera (è possibile utilizzare un satellite DSM2 insieme con la GUI)
• 6 ingressi del ricevitore
• 6 ad alta risoluzione uscite PWM (11-bit)
• Supporta tutte le configurazioni fino a OKTO con supporto cam-stab
• RAM 2.5kB
• ATMEGA32U4 based con Leonardo Bootloader
• 10DOF matrice di sensori
• MPU-6050 (Gyro / ACC)
• HMC-5883L (MAG)
• MS5611-01BA03 (BARO)
• connettore Bluetooth / GPS (sul fondo, solo GPS o satellite DSM2 può essere utilizzato in una sola volta da quando l'32U4 ha un solo UART)

Specifiche:
Circuito integrato principale: ATMEGA32U4
Velocità della CPU: 16 MHz
Formato Flash: 32kB (3.3kB sono prese dal bootloader)
Ingresso: 6 x ingressi RX alta risoluzione (2 canali AUX)
Uscita: 6 ~ 8 uscite motore (motore 1-6 sono a 11 bit PWM)
Dimensioni: 50x50x16mm
Peso: 14g

* Nota: Questo non è un prodotto di marca originale Arduino.

Product
Specifications

Ulteriori informazioni

  • SKU:
    9387000008
  • Brand:
    No
  • Peso (g)
    34.00
  • Lunghezza
    70.00
  • Larghezza:
    20.00
  • Altezza:
    65.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
This is a nice board, but it lacks memory. The unstable barometer uses just enough that you can add a lcd. That would be a great improvement. The board and components are well constructed. About the barometer, it is unstable and needs a filter capacitor to buff the noise. Even buffered it still don't actually want to hold at any height. A suggestion is if you purchase this board is to omit the barometer and use it like any other multiwii board. If anyone knows how to do that please post it!
Quality
Value
Overall
Quality
Value
Overall
This FC board is very nice but is not so used, there are no tutorial about it and if it's your first FC is quite hard to setup and make it work. Anyway i worked out most of the problem, and i can say that the flight is very stable now. If you are looking for a manual, you can find it in the International Warehouse product, but is not so completed and well explained. Anyway, it's a nice FC!
Quality
Value
Overall
Quality
Value
Overall
Bought this for building a octocopter with altitude hold. After a lot of fiddeling, changing code etc, I gave up trying to get 8 motor channels working. The barometer pretty much sucks, very fuzzy uneven readings (installed a capacitor helped a little), but who wants to do SMD on a small flight controller? You also need to enclose the sensor, or it will go banana as soon as some wind gets to it. I ended up destroying the board because the capacitor came loose, tearing a bit of the copper off at the same time.
Quality
Value
Overall
Quality
Value
Overall
I've bought it to replace a MultiWii328P. It slightly more expensive, but I can use the USB and a satellite receiver port together. It works very well with MultiWii 2.2.
Quality
Value
Overall
Quality
Value
Overall
Worked good for a long time. Everything worked exactly as it should. Until one day magic smoke appeared from the possessor. After that it was useless. I think it's good value, however it does not have enough memory it needs to use all the multiwii features. For example GPS.
Quality
Value
Overall
Quality
Value
Overall
Very good product, it's my first quad , with this FC it was easy to configure with Multiwii 2.3 , but be carefull of the pinout, i add a document which describe the association
Quality
Value
Overall
Quality
Value
Overall
This board is not worth anything it does not work you will break you're quad before anything.....
Quality
Value
Overall
Quality
Value
Overall
Es ist ein sehr gutes Board. Ich benutze es mit MW 2.2. Die vielen Sensoren ermglichen viele Mglichkeiten. Das Board ist gut verarbeitet. Leider habe ich aber Probleme mit der Bindung eines Bluetoothmoduls mit dem seriellen Port.
Quality
Value
Overall
Quality
Value
Overall
Bought it for my mini quadrocopter. I flashed it with MultiWii 2.1, everything works fine if you define following switches in MW source: #define FREEIMUv043
#define A32U4ALLPINS
#define RCAUX2PIND17
Quad hovers very stable. Using the board in combination with attached orange rx100 satellite which also works great.
Don't know if MultiWii 2.2 will bring any improvements, for now i will stick with 2.1
Mayke sure you only connect it to USB 2.0 otherwise it won't work.
Quality
Value
Overall
Quality
Value
Overall
Ho montato questa Multiwii sul x230 mini quadcopter, finalmente sono riuscito a fare funzionare tutto.

Ho usato il software multiwii 2.2, per fare andare la scheda e poter usare tutti i canali bisogna attivare questi valori nel file config.h

#define FREEIMUv043 // same as FREEIMUv04 with final MPU6050 (with the right ACC scale)

#define FORCE_MAG_ORIENTATION(X, Y, Z) {magADC[ROLL] = X; magADC[PITCH] = Y; magADC[YAW] = Z;}

#define A32U4ALLPINS

#define RCAUX2PIND17

facendo questo la pinnatura dell'input della rx sar modificata risultera la seguente partendo dal THR:

Thr - Yaw (Coda) - Aux1 - Pitch (Elevatore) - Roll (Alettoni) - Aux2

Cosa molto importante anche mettere la scheda nel verso giusto, il senso della freccia e la lettera N serigrafata sulla scheda indicano il verso di montaggio, in pratica la scheda andr montata col connettore USB rivolto nella parte posteriore del quad, e cmq non di spigolo come altri fight controller.

Prossimamente montero anche un GPS, ma adesso devo prima affinare i settari, anche se con quelli di default il quad vola gia abbastanza bene.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.