MultiWii Modulo Display OLED I2C 128x64 Dot (MWC)

• Overall
• Quality
• Value

Customer Rated

Oct 09, 2014

Great little oled display!
It works out of the box with a multiwii 328P on 3.3v or 5v.
I got it to work on a naze32 by shorting pins 19 & 20 (3.3v only and cleanflight firmware)

• Overall
• Quality
• Value

Customer Rated

Apr 07, 2014

I got one of these and was working fine with the multiwii and four separate esc's. I moved everything to a different kit and used the Qbrain 4-in-one esc. The board and gps seem to still work, but my lcd no longer works. Does anyone know what could cause this as it was working before and I have not changed any software settings? So I have tried in vain to bring up the screen but it just won't turn on with the new all in one esc.

• Overall
• Quality
• Value

Customer Rated

Feb 04, 2014

Very good product, I'm using it with MultiWii 328p and with that board the OLED works great out of the box. With this little screen it's not necessary to carry all the computer stuff for flying sessions. A must have.
Regards, Tomek

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 17, 2014

still trying to figure out how to connect this to my megapirate board as the connectors aren't standard on that board. haven't got the chance to connect it to my 328p yet though, have to reload the firmware etc to try that

• Overall
• Quality
• Value

Customer Rated

Jan 07, 2014

Good product at a very good price specifically for the mutliWii software which is using its own i2c drivers. If you want to use it for general Arduino or other projects then you need a little hack since the board is not wired to give information back through the i2c bus ... simply put a solder bridge between pin 19 and 20 and it will work great with the libraries on the internet !