Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

MXS-R 50e Balsa 3D 1.450 millimetri (ARF)

MXS-R 50e Balsa 3D 1.450 millimetri (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
4530 g
SKU:
248000001

Combine

essential items and
esc
battery
servo
motor
Descrizione
prodotto

Solo un rapido sguardo a questo pregevole fattura MXS-R è tutto quello che serve per essere colpito dalla sua qualità, aspetto più duro e si vedrà che questo modello è un esecutore serio.

La costruzione / strato Balsa è della migliore qualità e molta attenzione al risparmio di peso, senza comprometterne la resistenza è stato raggiunto. Altri indizi utili a capire la qualità di questo modello sono dati via dalla fibra di carbonio sotto-carrozza, tubo dell'ala, ruotino di coda, supporto motore e le corna. Il rivestimento sapientemente applicata è ben fatto e soddisfa i pantaloni fibra di vetro cappuccio e ruota superbamente dipinti, lo schema attraente è ideale anche per l'orientamento. Il MXS-R è molto pratico e caratteristiche collegare ali per un facile trasporto e una grande tettoia per un facile accesso della batteria.

Il MXS-R è stata chiaramente costruita per il 3D hardcore, le superfici di controllo enormi combinati con un peso leggero volante ti danno il controllo totale e con questo in mente, l'hardware leggero e pesante dovere, tra cui un tiro / tiro del timone e controllo di palla-linked verga di offre il tipo di precisione che ci si aspetterebbe per un aereo in 3D ad alte prestazioni. Nonostante chiaramente in fase di costruzione con il 3D in mente, il MXS-R sarebbe altrettanto felice battenti lo sport, quindi non avete bisogno di essere un hard-core pilota 3D per apprezzare e godere di questo modello acrobatico veramente spettacolare scala!

Caratteristiche:
• Capacità 3D Superb
• Costruzione leggera ma forte
• CF Ala Tube, Carro & Ruderhörner
• Pull / Pull timone & Ball Linked barre di controllo
• Costruzione di alta qualità Balsa
• Sapientemente Coperto di qualità che coprono
• Cowl & Wheel pantaloni High Gloss verniciato
• CF / Ply supporto motore con preinstallato dadi ciechi

Specifiche:
Apertura alare: 1.450 millimetri
Lunghezza: 1.442 millimetri
Ala Area: 38,6 dm2
Peso di volo: 2100g
Peso a secco: 1320g

include:
Manuale d'istruzioni
Spinner
decalcomanie
tutto Hardware

Richiede:
Trasmettitore 6 canali e ricevitore
50-55 Outrunner Motor Brushless
Servo 4 x Digital High Torque MG Parco
60A ~ 80A ESC w / BEC
4 ~ 5S 14,8 ~ 18.5V 3300 ~ 3600mAh Lipoly Batteria

Product
Specifications

Ulteriori informazioni

  • SKU:
    248000001
  • Brand:
    N/A
  • Capacità ( mAh )
    No
  • Peso (g)
    4530.00
  • Lunghezza:
    1080.00
  • Larghezza:
    260.00
  • Altezza
    430.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Trs bel avion bonne finition bon raport qualit prix
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Postage to au is a rip off but was definitely worth it. Absolutely love this plane except the tail wheel assembly is rubbish. Other than that it flys great nice and light with huge control surfaces capable of large amounts of throw makes it a really fun model. Stock in au needed just in case
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just built my MXS-R a week ago well packed with only the spinner missing. I have done about 6 flights. The model is absolutely beautiful, and flew great. Only 2 clicks on my right aileron since it was slightly warped from the shipping. Great looks and flies like a dream. check youtube link in the video tab of my maiden flight. Thanks HobbyKing for a beautiful plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Weight is 2.40kgs that is the best you can have with 5s 3000( 400grs)
construction all good very good kit.
frame weight is 1380grs all in
electric is 5045 motor, 5 servo ( 100grs), 60 amps ESC-60grs, 20 grs receiver, prop 16/8-50grs, I run an extra 40 grs telemetrie.
Only problem is the sticker, not super good quality and some of these were right hand not left and right.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have now flown this model 8 times under varying conditions. Very straight and true, goes exactly where you point it. I have since replaced the 16" x 8" wood prop with a Mejzlik 16x10 which gives unlimited vertical and allows good cruising at half throttle. Motor is 4260 500kV(290grams) with 80A YEP ESC & 4000mAh Zippy compact LiPo (460grams), giving 12 minutes flying time with throttle management. Full throttle is only required for unlimited vertical lines and tumbling manoeuvres. The only failure has been one wheel spat cracking around the ply mounting plate, easily fixed with a little fibreglass and cyano. The white striped underside makes orientation simple when doing aerobatics. The 2.5 kg flying weight is good for this size model allowing easy use from the average sports oval. I highly recommend this quality aircraft, it's a joy to fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good quality kit with well made airframe and quality C/F extras. The manual supplied on disc is basic and assumes an experienced modeller, c/g info is good, control throw info is wrong. The supplied plastic spinner is a tad small at 50mm diameter. I replaced the spinner with a carbon fibre one with a 2.25" (57mm) diameter that fits the cowling much better. The cowling does look a little strange with it's 3 cooling holes but they work well. The supplied pull/pull rudder cables were frayed, poor quality and went in the bin. I used coated S.S. 90lb fishing trace wire. Servo cut outs allow for 36x15 size servos. I used full size Ino Lab servos for rudder and elevator (5.5kg torque). I put the elevator servo between the wing spar and rudder servo and use a C/F push rod with the supplied ball links. I have used a 42/60 500kv brushless outrunner, 16x8 light electric wood propeller, 80A YEP ESC, Zippy compact 4000mAh 5S 25C LiPo with XT-90 connectors. Flying weight is 2.5kg.
All in all this is a well designed and finished kit. It is a good size at 57" (1450mm)
The build was straight forward and the end result is very pleasing. It can be set up mild or wild, with good manners in most conditions. I can recommend this kit to all modellers wanting a well priced, 3D capable aerobatic model with good presence in the air.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is a great plane, well built, light but strong.
awesome flight performance, hard to beat. stall is a non issue.
you name the manoeuvre and this can do, it helps with the huge control surfaces.
my set up is heavy ! with a 50-60 outrunner turning a 17x10 apc with 8s 4000 (3100gms auw) but is able to all but the real tight stuff.
a 50-45 on 5 or 6 cell would be plenty but I used what I had.
well done HK...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Build quality is pleasing. It flies faster on a 5-S.motor - AHi 2826/12 gold line. The controller 100 a. Screws 13 * 6 WOOD. In flight, a very predictable. Low speed on landing. I'm happy. Among the shortcomings. Ruder wheel mechanism fails to remove the slack.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tolles 3D Maschine, fliegt sehr sauber und vllig neutral durch alle Figuren.
Preis/Leistung ist super, Flugzeug ist sauber gebaut und Bespannung/Folie ordentlich aufgebracht. Ein zwei kleine Stellen hab ich nachgebgelt aber nur weil ich sehr pingelich bin, ntig war es nicht!

Zubehr ist alles vorhanden und vollstndig was man so braucht und von guter Qualitt. Anleitung auf CD

Mein Setup.
Motor: Turnigy L5055A-400 Brushless 400kv
Regler: Turnigy 80A plush
Propeller: APC 16:10
Servos: Mi 11,8kg MG coreless/digital
UBEC: Turnigy 8-15A
Lipo: Turnigy 6S1P 4000mAh 40C
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice kit indeed! I've bought this plane a few days ago and i've to be honest, i was a little afraid that it will arrive with missing or broken parts...but it was perfect. Very well packed and all the parts needed where inside the box. I'm still building it but it's a really nice plane and i can see it flying already heehhe! Awesome! Maybe it was luck but i'm really happy with Hobbyking so far. As soon as i make the first flight i will post some pics and maybe a video!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy MXS-R 50e

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.