Motori NGH stanno guadagnando una ben meritata reputazione per prestazioni e valore, sono i motori modello aero fatto apposta, non tipi motosega convertiti. Lo sviluppo continuo da NGH rende questi alcuni dei migliori disponibili sul mercato oggi.
NGH continuare a innovare con questo primo motore corsa di produzione di gas 4, si ottengono tutti i vantaggi e il suono di un colpo 4, ma con l'economia di gas. Questo motore è stato progettato da zero e dispone di un carb Walbro, RcXEL accensione, gemello del rullo CNC biella, doppio pistoncino anelli per una migliore compressione ed è trave o radiale montato con le off supporto fornito. Con il suo sorprendente aspetto è garantito per girare le teste su qualsiasi campo di volo.
• Compatto e leggero
La tecnologia • 4 tempi
• Trave o radiale tradizionale montare
• qualità e prestazioni eccellenti
Tipo: Gas 4 aria corsa motore raffreddato
Alesaggio x corsa: 39 x 31,8 millimetri
Rapporto di compressione: 9: 1
Crank Tipo: forgiato con supporto dual cuscinetto
Albero motore Discussione: 3/8 "x 24TPI
Carburatore: Walbro personalizzato WT1022
Gamma RPM: 1800 - 8000rpm
Accensione: Auto avanzata RcEXL DC-CDI
Candela: CM6 RcEXL
Accensione Potenza: 4.8 ~ 6V DC (4 ~ 5 cella della batteria NiMH)
Carburante: Senza piombo Gas / miscela di olio 35: 1
Consigliato Eliche: 18x8 / 18x10 / 20x8 2 lama
Peso: 1580g con sistema di accensione
Surprising value and performance for the $. Pulls a 1/4 scale Tigermoth with authority and nice four stroke sound through the straight pipe, no muffler needed. Arrived tuned and ready to run. Needed 1/8 leaner turn on the low end jet. Idles smoothly at low RPM. Transitions to full throttle instantly. I also run an OS FG40 four stroke gasser. The OS has more power, but for $450 less, I'm planning to order another NGH soon. Measure your cowl length though. With rear carb and a long crankcase this engine is longer than some others. I took 1 3/4" off of the engine box for the Tigermoth and reinforced the new firewall well with gussets and fiberglass.I bought this motor for a Piper Pa - 25 with 2580mm span . the motor runs very well and quiet.
The Price and the Quality of the Engine is also very goodBought a new one of these last summer. Had to go to Aus tars for a beam mount and Big Pla nes for a muffler. Apart from that, the thermal spacer (white washer was not flat and was causing an air leak in the inlet. After fixing that, it ran great. Is being fitted in a 1/3 scale SpaceWalker. A friend then sold me a slightly used one for 60 (Thats what I said) and also had the same problem. Quickly sorted, it flew last sunday in a Cap 232 72" span and was a great performer. Very clean, sounds right, and lasts 15min on a 16oz tank. Using a 20 x 8 prop at 6000rpmSo far so good. Only ran half a tank through it so far with 30:1 oil mix. 18x8 wooden prop.I have received this engine from hobbyking recently. It was in a perfect condition when it arrived. All additional components neatly packed in separate bags. I have read on some fora that people received their engines with damaged cooling fins, but not this one. Must point out that these engines where not supplied by HK.
Assembled everything and can't wait to start her up tomorrow. As soon as I have tested it I will post video's
I have the engine and it runs great. Hard to start the 1st day, but after it runs, I can re start it by hand. has anyone tried running the engine with higher Octane? I'm running regular pump gas 87 and I need to run higher for my other gas engines at the field. will 100 Octane hurt this motor at 25:1 full synthetic Oil?I put this engine on a Hangar Nine 1/4 Scale DeHavilland Tiger Moth. I have had four flights on this plane/engine. I really like the engine. It idles very well and has tons of power. I am using a 20X8 Xoar prop and there is plenty of pull. The idle is fantastic and the sound is awesome. I have not had any issues with it thus far. I did run the engine on the ground for break in using approximately 40:1 mix. I was able to start the engine by hand from the start and have been able to hand start it, although it seems to take a few more flips than I would like. I am inclined to believe that the problem is with my fuel supply setup and not the engine. I am using a two line fuel set up, one for the clunk and one for vent. The fill comes into a "T" that is between the carb and tank. I can see that I am getting some small air bubbles in the line when I am filling the tank, so it stands to reason that air could be getting sucked in to the carb, rather than the fuel. It is a fine engine that runs really well. I have nothing negative to say about this engine.im looking for a biela 4 blade scaleprop for my ngh38cc. What dimensions do u guys recommand? Im considering biela 16*8, 15*9, 14*10 but im not sure wich one will give it the most power rpm ???This engine is a winner for the price. Just received mine and everything looks good. The prop im using is an Xoar 19X8. Running it on ASPEN 2stroke fuel with 2pcnt oil mixture.
Im going to mount the engine in a 60" Pitts Python.Atualmente dos melhores motores Gas a 4T e pelo preo no a melhor
file di clienti
Manual Scaricare ora [0kb] Manual Scaricare ora [0kb] No File Name Scaricare ora [551kb] No File Name Scaricare ora [100kb] 596414334X435868X17.jpg Scaricare ora [100kb] No File Name Scaricare ora [100kb] NGH38 Scaricare ora [100kb] NGH38 Scaricare ora [100kb] No File Name Scaricare ora [551kb] Hawker Hurricane 2m/NGH38 Scaricare ora [3.19Mb]