Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

NTM Prop Unità 50-50 580KV / 2000W

Generating Links

NTM Prop Unità 50-50 580KV / 2000W

Prezzo:

Now save risparmia 0,00 € 0,00 €

42,46 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
NTM5050-580
Spedizione gratuita? Clicca qui per saperne di più!

I motori NTM Prop Drive sono outrunners prestazioni roccia solida con avvolgimenti stretti, cuscinetti di qualità, magneti correttamente valutato, statore equilibrato e anelli di flusso più sono QC controllato in 14 punti, da materiale di lavorazione tutto il percorso attraverso di banco prova finale.

Perché noi progettiamo e realizziamo completamente questi motori in-house (da 3D / 2D di disegno per i materiali di approvvigionamento, la lavorazione, il bilanciamento, assemblaggio finale e banco) siamo in grado di controllare completamente la produzione e garantire la coerenza del prodotto, dalla progettazione fino alla spedizione del prodotto a voi. La rimozione di intermediari ha fatto sì che possiamo guidare un miglior rapporto al mercato e al minuto questi motori in fabbrica (i nostri) prezzi! Tutti i dati di performance sono reali e testati sui nostri lanci del motore.

I nostri ingegneri QC di controlli e contrappesi ogni motore prima della spedizione al magazzino HobbyKing.com.

Specifiche:
Modello: NTM Prop Unità Serie 50-50 580kv
Kv: 580rpm / v
Corrente max: 90A
Potenza massima: 2000W @ 22.2V (6S)
Albero: 8mm
Peso: 347g
ESC: 100A
Conteggio delle cellule: 4s ~ 6s Lipoly
Fori dei bulloni: 30mm
Filo Bolt: M4
Collegamento: 4mm proiettile-connettore

Prop Test Data:
14x8 - 14.8V / 587W / 40.3A / 2,9 kg di spinta
14x8 - 18.5V / 1077W / 60.7A / 4.03kg di spinta
14x8 - 22.2V / 1906W / 88.2A / 5.36kg di spinta
15x8 - 14.8V / 626W / 43.6A / 3,3 kg di spinta
15x8 - 18.5V / 1165W / 64.2A / 4.85kg di spinta
15x8 - 22.2V / 1961W / 88.8A / 6.15kg di spinta

  • Kv ( rpm / v ) 580.00
  • Correnti Max (A) 90.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 22.00
  • Potenza ( W ) 2000.00
  • Albero A ( mm ) 8.00
  • Lunghezza B ( mm ) 50.00
  • Diametro C ( mm ) 50.00
  • Can Lunghezza D ( mm ) 30.00
  • Lunghezza totale E ( mm ) 76.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • NTM Prop Motor
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Thomas | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 18, 2016

Motor's internally glued (fail) stator came unglued and damaged the coils.

HOBBYKING FAILED TO HONOR THEIR WARRANTY SAYING I "OPENED" THE MOTOR AFTER SLIDING THE STATOR FROM THE OUTER SHELL.

Find a different business, these people are a joke.

John | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 29, 2016

I'm using this motor in a 3D hobbies YAK and it has gobs of power, way more than is needed to 3D this plane. I'm using 6S and a 15x6E APC prop. I did have to replace the retaining clip on the shaft after a dozen flights or so but have not had any issues at all with the rest of the motor (no problems with magnets, etc.) at least yet. For the money it is quite the powerhouse.

Christopher | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 26, 2016

Sweet motor, I installed it in a phoenix tiger 3 40 to 55 size
With turnigy AE 80amp speedie 6s turnigy 5000mah battery
13x8 apc prop it's pulling 1598watts at 64 amps only had the chance to fly it once (dam work keeping me from flying ) it has awesome
Power great vertical, when I pulled up it almost went out of sight
Can't wait to get out this weekend

Joe | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2015

This motor is NOT shown with any mounting hardware, but it does say which mounting hardware to order. Secondly if you look close at the motor picture you can clearly see that the mounting hardware needs to go were the motor shaft is, or you need to mount the motor inside the mounting interface so that the shaft is pointing forward.

Timmybeetle | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2015

Hello After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good. Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....

Timmybeetle | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2015

Hello

After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good.
Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....

Ironman597 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 30, 2015

Motor shows up with no mounting brackets or way to attach prop. Without these components the motor is worthless.

Roger | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 10, 2015

An excellent motor, mounted into a Wot 4 XL with a 100amp ESC, original motor was a SC 120 4 stroke, don't really notice the difference other than the noise and cleanliness of the plane when flown, my view is ya can't go wrong with this...Great, keep up the good work HK

dtuplin | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2015

just got this motor ,it appears to be well made.have test run it to 40 amps so far no problem but would like to know what brand/type of prop hk used for their test data

poorboy | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 10, 2015

This is a strong Motor. I fit it in a 81" Piper. First I tested the engine in a test bench.
I use a 5S Zippy-LiPo 4500 mAH
Propeller 1: Turnigy Ultra-Light wood 15x6
54,3 A, 1005 Watt, 5,1 Kg Schub
Propeller 2: TGS - Sport 15x8
70,1 A, 1322 Watt, 4,5 Kg Schub
ESC: YEP 100 A 2-6S

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
File dei clienti
NTM 505-580Kv loose magnets Download [1360]
NTM 505-580Kv loose magnets Download [1360]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!