I motori NTM Prop Drive sono outrunners prestazioni roccia solida con avvolgimenti stretti, cuscinetti di qualità, magneti correttamente valutato, statore equilibrato e anelli di flusso, manici di utensili in acciaio più sono QC controllato in 14 punti, da materiale di lavorazione fino in fondo per banco finale test.
Perché noi progettiamo e realizziamo completamente questi motori in-house (da 3D / 2D di disegno per i materiali di approvvigionamento, la lavorazione, il bilanciamento, assemblaggio finale e banco) siamo in grado di controllare completamente la produzione e garantire la coerenza del prodotto, dalla progettazione fino alla spedizione del prodotto a voi. La rimozione di intermediari ha fatto sì che possiamo guidare un miglior rapporto al mercato e al minuto questi motori in fabbrica (i nostri) prezzi! Tutti i dati di performance sono reali e testati sui nostri lanci del motore.
I nostri controlli QC ingegnere e contrappesi ogni motore prima della spedizione al magazzino HobbyKing.com.
Modello: 1100kv NTM Prop Unità Series 35-48A
Kv: 1100rpm / v
Corrente max: 70A
Potenza massima: 560W @ 12v (3S) / 640W @ 15v (4S)
Conteggio delle cellule: 3s ~ 5s Lipoly
Fori dei bulloni: 18,9 millimetri e 25 millimetri
Filo Bolt: M3
Collegamento: 3.5mm proiettile-connettore
Suggerita Prop: Prop dati di test in arrivo!
Kv ( rpm / v )
Correnti Max (A)
Potenza ( W ):
Lunghezza B ( mm ):
Can Lunghezza D ( mm )
Max Tensione (V )
Albero A ( mm ):
Unit Weight (g):
Diametro C ( mm )
Lunghezza totale E ( mm )
Resistenza ( mh ):
I'm using this motor with a 9x6 3blade nitro style prop, a pair of zippy 4s 2800mAh and a 60A HK esc. This setup is for a 2.2Kg - 72" bixler style FPV pusher plane and prop space was an issue. The autonomy is over 20 minutes and it's crazy powerful but becomes quite hot with this setup: about 60 degrees C on the casing. I don't have what it takes to measure the amperage but I'm fairly certain that this is too close to the motor's limits so I will change the prop for a 9x5 3blade GWS prop instead.Kraftvoller durchzugsstaker Motor. F das Geld ist der absolut zu empfehlenI orderd 6 of these motors, none of them had perfect bearings, two being almost perfect and one being slightly louder than the other three. They will work just fine but some people like to complain about that sort of thing. The rotors are all pretty well balanced (most phones vibrate harder), I'm not going to complain about that. Windings also seem to be fine and well packed. I intend on running these with 10x5,5 props on 4S LiPO, but I'm currently missing some bigger ESCs so I cant properly load them down to properly test that config. Note that this is just a motor without any accessories which are sold extra. It's an OK product but Iplusll give it 4 stars because the bearings aren't quite there.Disappointed. Had one good flight with this motor and it has been a problem ever since that time. Overheats at power levels > 350 watts. The motor wires are very stiff and apparently have cracked, broken, or shorting out (with heat) at the entry to the bell. With better wire this could be a great motor.This motor is a monster on crack. Wide range of props and applications. I have used a 12x7, 13x4, 13x6, and more. Just hook it up to your watt meter and watch your numbers. These NTM motors are one of my first choices, great price too. I have put my way over price E-flite motor's on the shelf for these not because of price but because of power.Got this motor in my PZ Sukhoi after I ditched the stock setup. A lot of people are wondering if this motor can handle the listed amps and I'm happy to be the one who says it does, and then some. Throwing a 12x6 APC on a 4s brings the static amperage up to right at 70 amps. I have flown the absolute crap out of this motor and it barely comes down hot, running a 85 amp esc with plenty cooling for the motor though. My Sukhoi is now a completely out of sight vertical rocket that I would put up against anything in its size. For the price this motor is a gem among gems and the quality is what I've come to expect from the NTM line of outrunners.
-tayzeComplessivamente un ottimo motore, potente e ben costruito.
Sicuramente un rapporto qualit prezzo veramente stellare.Strong performance on pusher configuration.I am very happy with this motor. The dyno graphs are helpful but I think the motors are better than we would think looking to the graphs. So I have measured the 3 most important motor parameters. Kv was 1085/V; Io is 2.4A at 11V; Ri is 0.028 Ohms.
This gives a calculated max.Efficiency of 85pcnt at 12V and 13A.I run this motor on 4s with a 10x10 APC and pull about 65a and 900w on a 1100mm Spitfire. I reach speeds just under 100mph with no problem. The motor gets pretty warm if I run WOT the entire time, but it takes the extra watts with no issue. Great motor for the cost!