New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

NTM rotore drive 450 Series 3400KV / 500W

NTM rotore drive 450 Series 3400KV / 500W

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000066
WANT FREE SHIPPING? Click here to find out more!

NTM Rotor Drive, la nostra ultima novità della gamma di motori prestazioni outrunner NTM sono motori brushless outrunner di alta qualità progettati specificamente per l'uso in modelli di elicotteri elettrici ad alte prestazioni di oggi. I motori NTM rotore unità sono dotate di alta qualità, precisione fatta cuscinetti a sfera giapponesi che garantiscono lunga durata e prestazioni eccellenti in alta richiesta R / C elicottero. Sono inoltre dotati di una zona piatta sull'albero per pignone mounitng.

Abbiamo testato le prestazioni di questi motori contro altri motori heli popolari oggi sul mercato come il motore Allinea 450MX. Nel nostro test dei motori NTM Rotor unità non solo ha offerto una maggiore efficienza, ma anche molto più elevati di gestione corrente (in rialzo del 20%).

I motori NTM Rotor Drive sono outrunners prestazioni roccia solida con avvolgimenti stretti, cuscinetti di qualità, magneti correttamente valutato, statore equilibrato e anelli di flusso più sono QC controllato in 14 punti, da materiale di lavorazione tutto il percorso attraverso di banco prova finale.

Perché noi progettiamo e realizziamo completamente questi motori in-house (da 3D / 2D di disegno per i materiali di approvvigionamento, la lavorazione, il bilanciamento, assemblaggio finale e banco) siamo in grado di controllare completamente la produzione e garantire la coerenza del prodotto, dalla progettazione fino alla spedizione del prodotto a voi. La rimozione di intermediari ha fatto sì che possiamo guidare un miglior rapporto al mercato e al minuto questi motori in fabbrica (i nostri) prezzi! Tutti i dati di performance sono reali e testati sui nostri lanci del motore.

I nostri ingegneri QC di controlli e contrappesi ogni motore prima della spedizione al magazzino HobbyKing.com.

Specifiche:
Modello: NTM rotore rigido Series 2938 3400kv
Kv: 3400rpm / v
Max Cont. Corrente: 30A
Burst corrente (5 sec): 46A
Potenza massima: 500W @ 11.1V
Albero: 3.5mm
Peso: 96g
Conteggio delle cellule: 3s Lipoly
Fori dei bulloni di filmato: 16mm x 16 millimetri
Filo Bolt: M2.5
Collegamento: 3.5mm proiettile-connettore

  • SKU 9171000066
  • Brand NTM
  • Peso 121.0000
  • Lunghezza 80.00
  • Packaging Width 23.00
  • Altezza 62.00
  • Kv ( rpm / v ) 3400.00
  • Correnti Max (A) 46.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 12.00
  • Potenza ( W ) 500.00
  • Albero A ( mm ) 3.50
  • Lunghezza B ( mm ) 38.00
  • Diametro C ( mm ) 29.00
  • Can Lunghezza D ( mm ) 25.00
  • Lunghezza totale E ( mm ) 56.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good over all well made

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good over all well made

No issues, only thing I found a little strange was the motor wires were stiff and stayed in whatever position they were bent. Did give the feeling they would snap if bent back and forth too much

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No issues, only thing I found a little strange was the motor wires were stiff and stayed in whatever position they were bent. Did give the feeling they would snap if bent back and forth too much

Bought it for HK 450 heli. This is not fit. Different distance for mounting holes, comes without screw. HK 450 using 3mm screw and 3.17mm pinion holes. This one has 2.5mm mounting screw and 3.5mm holes. Building my first heli from scratch so I did not know about differences pinion and mounting holes. I hope this info can help someone else with similar experience :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought it for HK 450 heli. This is not fit. Different distance for mounting holes, comes without screw. HK 450 using 3mm screw and 3.17mm pinion holes. This one has 2.5mm mounting screw and 3.5mm holes. Building my first heli from scratch so I did not know about differences pinion and mounting holes. I hope this info can help someone else with similar experience :)

Purchased this motor for a HK450 pro and it wont fit unless you grind away to carbon frame i think its a waste of money also wires are solid not flexible wont recommend this one

Andy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased this motor for a HK450 pro and it wont fit unless you grind away to carbon frame i think its a waste of money also wires are solid not flexible wont recommend this one

Andy

Great motor, run very efficient on a hk 450 pro FBL TT. But remember its not 3.17mm pinion, you need an align 3.5mm pinion.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, run very efficient on a hk 450 pro FBL TT. But remember its not 3.17mm pinion, you need an align 3.5mm pinion.

I've tried several replacement motors on my B450x, and so far this has been the best. Fitted with a lynx slant 12t pinon, I still have plenty of power for sport 3d flying on my tired batteries. Drop in a 13t if your batteries are a true 45c rating. Contrary to the description it is 6 pole, and note that it is a 3.5 shaft and 2.5 mounting holes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've tried several replacement motors on my B450x, and so far this has been the best. Fitted with a lynx slant 12t pinon, I still have plenty of power for sport 3d flying on my tired batteries. Drop in a 13t if your batteries are a true 45c rating. Contrary to the description it is 6 pole, and note that it is a 3.5 shaft and 2.5 mounting holes.

I've just bought one of these. The issue isn't the mount centres nor the screw size. It's the fact the shaft is 3.50mm and not the standard 3.17mm so my pinion doesn't fit.
My fault really, should have checked. Just got to get a new pinion now. Not the cost that's an issue, but had I realised atvthe time I ordered it I could have bought a matching pinion at the same time.
Or a different motor. . . . . .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've just bought one of these. The issue isn't the mount centres nor the screw size. It's the fact the shaft is 3.50mm and not the standard 3.17mm so my pinion doesn't fit.
My fault really, should have checked. Just got to get a new pinion now. Not the cost that's an issue, but had I realised atvthe time I ordered it I could have bought a matching pinion at the same time.
Or a different motor. . . . . .

Preisgnstiger, sehr starker Motor fr den 450er Heli. Die Verarbeitung ist Erwartungsgem nicht ganz so schn wie bei einem Align oder Scorpion. Der Statortrger ist scharfkantig genauso wie die Lcher im Geblse. Auf der Glocke war ein trber Schmier, der mit Aufkleberentferner runter ging.
Motor luft vergleichsweise leicht mit wenig Rastmoment. Kein Lagerspiel und vibrationsfreier Lauf. Wrde ich wieder kaufen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Preisgnstiger, sehr starker Motor fr den 450er Heli. Die Verarbeitung ist Erwartungsgem nicht ganz so schn wie bei einem Align oder Scorpion. Der Statortrger ist scharfkantig genauso wie die Lcher im Geblse. Auf der Glocke war ein trber Schmier, der mit Aufkleberentferner runter ging.
Motor luft vergleichsweise leicht mit wenig Rastmoment. Kein Lagerspiel und vibrationsfreier Lauf. Wrde ich wieder kaufen.

I've just bought one as recommended for a HK-450GT PRO V2 3D Belt-Drive Helicopter Kit.
The bolt holes are not 16 x 16 mm but 11 x 11 mm instead, which doesn't match the receiving part of the hell (would need 16 x 16 as specified above. The bolt thread isn't 2mm - 2.5mm may be correct if it's not imperial.

Disappointing - I'll have to buy a different one, hoping that it will fit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've just bought one as recommended for a HK-450GT PRO V2 3D Belt-Drive Helicopter Kit.
The bolt holes are not 16 x 16 mm but 11 x 11 mm instead, which doesn't match the receiving part of the hell (would need 16 x 16 as specified above. The bolt thread isn't 2mm - 2.5mm may be correct if it's not imperial.

Disappointing - I'll have to buy a different one, hoping that it will fit.

Excellent motor for my 450 TT PRO V2. So much more torque and power than the motor I was using before. Before I was flying with a lesser motor and crashed more than once due to a lack of power when I needed to get out of a hairy situation. With this motor I can hover at near half stick as long as the battery lasts with great control and an excess of reserve power when i need it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent motor for my 450 TT PRO V2. So much more torque and power than the motor I was using before. Before I was flying with a lesser motor and crashed more than once due to a lack of power when I needed to get out of a hairy situation. With this motor I can hover at near half stick as long as the battery lasts with great control and an excess of reserve power when i need it.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!