New Items Notizie Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

OrangeRX Aperto LRS 433MHz trasmettitore 1W (JR / Turnigy Compatible)

OrangeRX Aperto LRS 433MHz trasmettitore 1W (JR / Turnigy Compatible)

Shipped From:
  • Global
QTY:

Now save risparmia 6,17 € 6,17 €

Special Price 23,15 € 23,15 €

You save risparmia 6,17 € 6,17 €

Was  29,32 €

Stato:
Disponibile
SKU:
9171000284-0
WANT FREE SHIPPING? Click here to find out more!

I nuovi OrangeRX aprire il modulo TX LRS tutti è un modulo trasmettitore open source che può essere programmato per usare la vostra scelta di protocollo e di qualsiasi canale nella gamma di 400 ~ 460MHz. E 'un sistema trasmettitore RF completamente personalizzabile dall'utente. Si può anche essere programmato per utilizzare le funzioni extra come la telemetria quando viene utilizzato con il modulo OrangeRX OpenLRS Rx.

Il OrangeRX aperto LRS TX Module un'unità molto versatile perfetto per i vostri progetti personalizzati.
Esso utilizza una unità di 1000mW RF e processore Atmega328 con Arduino Bootloader che consente di caricare i codici pre-scritti o lascia la tua base alle proprie esigenze trasmettitore.

Il codice predefinito utilizza 3 canali salto di frequenza. Se si desidera utilizzare un diverso protocollo, è possibile scrivere i propri codici Hopping o semplicemente scaricare uno dei tanti set di codice OpenLRS già scritti già disponibili.

Caratteristiche:
• Supporto 3.3V FTDI per una facile programmazione (NON utilizzare un adattatore seriale / AVRISP 5V)
• porta seriale per il caricamento del firmware e l'applicazione di telemetria
• Porta I2C per applicazioni di sensori (Wii Motion Plus basato Headtracker)
• Processore 16Mhz Atmega328 con Arduino Pro bootloader compatibile Mini.
• regolatore di tensione 3.3v LM2937
• Connettore UFL tra il circuito stampato e l'antenna
• Buzzer per informazioni udibili
• Uscita 1000mW, frequency hopping capacità e centinaia di caratteristiche

Specifiche:
Compatibilità: 5-pin JR trasmettitori di moduli basati compatibili
Frequenza: 433MHz
Tensione in ingresso: 6.8 ~ 12VDC
IC: ATMEGA328P
Potenza: 1000mW
Gamma: Sistema Gamma completa

include:

OrangeRx OpenLRS Tx Module (JR compatibile)
Antenna

* Nota: L'impostazione e uso di Open LRS richiede capacità di programmazione di computer e esperienza di base Arduino. Questo non è un sistema "plug and play". Vedere il documento allegato nella scheda "File" per le risorse su informazioni di programmazione, i download del firmware e altro ancora.

* Nota: LRS aperte utilizza il supporto 3.3V FTDI, NON usare un 5V di serie / adattatore AVRISP o danno si verificherà.

* Nota: Si prega di verificare con le autorità locali per quanto riguarda il funzionamento di questa apparecchiatura prima di acquistare. Regolamenti in materia di potenza, frequenze utilizzabili e licenze 'per operare variano da regione a regione.

* Nota: Questo non è un prodotto di marca originale Arduino.

  • SKU 9171000284-0
  • Brand Orange
  • Capacità ( mAh ) -
  • Peso 78.0000
  • Lunghezza 90.00
  • Packaging Width 35.00
  • Altezza 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This was the best emitter that could even be used as receiver using the Ultimate LRS software. Compatible with Ardupilot telemetry, it provides an awesome range.
Considering that you don't even need the hkpilot telemetry set when you use these, I can say the value for the price is amazing. Please HK we need restock! Check the ultimate LRS website to see the improvments that you should make to this module to get the best range possible.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was the best emitter that could even be used as receiver using the Ultimate LRS software. Compatible with Ardupilot telemetry, it provides an awesome range.
Considering that you don't even need the hkpilot telemetry set when you use these, I can say the value for the price is amazing. Please HK we need restock! Check the ultimate LRS website to see the improvments that you should make to this module to get the best range possible.

Best LRS option considering its price in the market so adviced.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best LRS option considering its price in the market so adviced.

good for mods with my apm. nice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good for mods with my apm. nice

these have crap range out of the box but all you need is to turn the stock antenna into a half wave whip all you need is a wire and antenna tube start at 350mm and slowly cut it back checking rrsi dont cut shorter than 310mm use a quarter wave on rx i left the rx in my house and walked half way across town without lossing signal i didnt go to the max range ill never fly that far away

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these have crap range out of the box but all you need is to turn the stock antenna into a half wave whip all you need is a wire and antenna tube start at 350mm and slowly cut it back checking rrsi dont cut shorter than 310mm use a quarter wave on rx i left the rx in my house and walked half way across town without lossing signal i didnt go to the max range ill never fly that far away

WARNING! I bought 3 of these orange lrs modules and in ALL of them the ground plane on the pigtail was broken. If you are getting 200-300m range probably yours is broken too. And here is the real fun part: You probably burned the TX at this point(practically run the module without antenna)

I strongly recommend running a continuity test on the pigtail before ever turning the module on. Also if you have an soderin iron put dab of soder on SMA's pins. That was botced one of my modules too. Seriously messed up QC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WARNING! I bought 3 of these orange lrs modules and in ALL of them the ground plane on the pigtail was broken. If you are getting 200-300m range probably yours is broken too. And here is the real fun part: You probably burned the TX at this point(practically run the module without antenna)

I strongly recommend running a continuity test on the pigtail before ever turning the module on. Also if you have an soderin iron put dab of soder on SMA's pins. That was botced one of my modules too. Seriously messed up QC

After a couple of months I have been trying to get my OpenLRS Orange RX 1W TX to work correctly. It's still not, at least not as good as you'd expect it to work.
No problem with the flashing process (OpenLRSNG) and binding, so far everything was fine. However, even with decent antennae (SR771 on TX and Sander on RX), the maximum range I could achieve was 1.8Km, beyond that the RX went into failsafe. Not even close to what you can get with FrSky system (I have achieved 2.5Kms easily).
I also had a defective pintail that was replaced by an SMA cable directly soldered onto the board. At full power, the transmitting power is ~420mW which is supposed to give ~50Km range with good antennae.
A friend of mine had the same setup and didn't manage to get it to work correctly having a range even worse than mine. We decided to go back to FrSky which works way beyond what you can expect of a 2.4G system.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After a couple of months I have been trying to get my OpenLRS Orange RX 1W TX to work correctly. It's still not, at least not as good as you'd expect it to work.
No problem with the flashing process (OpenLRSNG) and binding, so far everything was fine. However, even with decent antennae (SR771 on TX and Sander on RX), the maximum range I could achieve was 1.8Km, beyond that the RX went into failsafe. Not even close to what you can get with FrSky system (I have achieved 2.5Kms easily).
I also had a defective pintail that was replaced by an SMA cable directly soldered onto the board. At full power, the transmitting power is ~420mW which is supposed to give ~50Km range with good antennae.
A friend of mine had the same setup and didn't manage to get it to work correctly having a range even worse than mine. We decided to go back to FrSky which works way beyond what you can expect of a 2.4G system.

Works excellent with my Turnigy 9x (ER9X firmware). Flashed with the newest version of openLRSng it provides lots of cool features, such as Spectrum Analyzer or telemetry (orange RX module can transmit data back to TX module which beeps on lost packets). Overall, OrangeRx Open LRS is one of the best TX modules you can buy for your JR or 9x transmitter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works excellent with my Turnigy 9x (ER9X firmware). Flashed with the newest version of openLRSng it provides lots of cool features, such as Spectrum Analyzer or telemetry (orange RX module can transmit data back to TX module which beeps on lost packets). Overall, OrangeRx Open LRS is one of the best TX modules you can buy for your JR or 9x transmitter.

There is no information regarding whether the unit requires to be flashed with the firmware in order for the unit to work. So, I tried to bind it to a OrangeRx open lrs 9 channel receiver. It never made the five beeps and never bound. After making 20 attempts to get the firmware updated (it would never connect), using the Orange RX firmware update kit, I noticed the unit LED's were dead and I am assuming the unit is now dead. Not worth spending $20 to ship it back to China only to have to wait for several months to get another one back, assuming HK will actually warranty it.
Waste of money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There is no information regarding whether the unit requires to be flashed with the firmware in order for the unit to work. So, I tried to bind it to a OrangeRx open lrs 9 channel receiver. It never made the five beeps and never bound. After making 20 attempts to get the firmware updated (it would never connect), using the Orange RX firmware update kit, I noticed the unit LED's were dead and I am assuming the unit is now dead. Not worth spending $20 to ship it back to China only to have to wait for several months to get another one back, assuming HK will actually warranty it.
Waste of money.

Incorrect part sent to me. One month on, still waiting for part to be authorised and delivered.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Incorrect part sent to me. One month on, still waiting for part to be authorised and delivered.

Great little thing here. I have a FrSky DF combo which I'm very satisfied with, but aiming for longer range brought me to this and adding also the fun setting it up, choosing and flashing firmwares, the possibility to flash it as a receiver and have 1W telemetry in both ways, makes this module unbeatable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little thing here. I have a FrSky DF combo which I'm very satisfied with, but aiming for longer range brought me to this and adding also the fun setting it up, choosing and flashing firmwares, the possibility to flash it as a receiver and have 1W telemetry in both ways, makes this module unbeatable.

  1. 1
  2. 2
  3. 3
Customer files
Conexión externa FTDI al receptor Download [3366]
how connect tx module to hk usb tool Download [2623]
Flash OrangeRX LRS FW and Taranis Download [1236]
this document helped me alote Download [164]
ULRS - Go for it Download [773]
better photo of pcb Download [4350]
No File Name Download [2054]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking